rcEthRingProtocolVlan
SWITCH-ERING-MIB ·
.1.3.6.1.4.1.8886.6.1.39.1.1.1.10
Object
column
r/w
Unsigned32
The Vlan of protocol packet.
Context
- MIB
- SWITCH-ERING-MIB
- OID
.1.3.6.1.4.1.8886.6.1.39.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcEthRingEntry
- Table
- rcEthRingTable
- Siblings
- 15
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 2-4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcEthRingIndex An index uniquely identifies a ERING Ring, which ranges from 1~8.
This value can't be modified after created. | column | Integer32 | .1.3.6.1.4.1.8886.6.1.39.1.1.1.1 |
| rcEthRingBridgeState The state of designated bridge, including forward,block,down and invalid.
The default bridge state is invalid(0) before ring was created.
Each bridge have two ports,down(1) if a… | column | Enumeration | .1.3.6.1.4.1.8886.6.1.39.1.1.1.11 |
| rcEthRingCurStateDuration It means duration since ring state got into stability if the current ring state is stable,
unstable state means duration of the last stable state. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.6.1.39.1.1.1.13 |
| rcEthRingDbMac Mac address of the designated bridge. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.8886.6.1.39.1.1.1.14 |
| rcEthRingDbPri The DB priority of the Ethernet ring. | column | Unsigned32 | .1.3.6.1.4.1.8886.6.1.39.1.1.1.15 |
| rcEthRingDbState The state of designated bridge, including forward,block,down and invalid.
The default bridge state is invalid(0) before ring was created.
Each bridge have two ports,down(1) if a… | column | Enumeration | .1.3.6.1.4.1.8886.6.1.39.1.1.1.16 |
| rcEthRingRowStatus This object is responsible for managing the creation,
deletion and modification of rows, which support active status and CreatAndGo, destroy operation. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.8886.6.1.39.1.1.1.18 |
| rcEthRingPrimaryPort The primary port blocked firstly when ring node state changes.
It can't be modified after enabled. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.6.1.39.1.1.1.2 |
| rcEthRingSecondaryPort The secondary port; It can't be modified after enabled. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8886.6.1.39.1.1.1.3 |
| rcEthRingPriority The priority of bridge,The value 0 signifies the lowest priority
and 255 signifies the highest priority. | column | Unsigned32 | .1.3.6.1.4.1.8886.6.1.39.1.1.1.4 |
| rcEthRingEnable This attribute, while TRUE, indicates that the function
of ethernet ring is enabled(1). The function is disabled(2), otherwise. | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.39.1.1.1.5 |
| rcEthRingDescription The description information of ethernet ring. | column | OctetString | .1.3.6.1.4.1.8886.6.1.39.1.1.1.6 |
| rcEthRingHelloTime The value indicates the interval between two hello packets sent by ethernet ring node,
and its unit is second.This value ranges from 1s~10s. | column | Unsigned32 | .1.3.6.1.4.1.8886.6.1.39.1.1.1.7 |
| rcEthRingRestoreDelay The value indicates the delay time when up happens, and its unit is second.
This value ranges from 0s~180s. | column | Unsigned32 | .1.3.6.1.4.1.8886.6.1.39.1.1.1.8 |
| rcEthRingHoldTime This time value determines the interval length during which no more than two protocol
packet received by this port. | column | Unsigned32 | .1.3.6.1.4.1.8886.6.1.39.1.1.1.9 |