SWITCH-ERING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
36
.1.3.6.1.4.1.8886.6.1.39.1.1 · 1 row entry · 16 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcEthRingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-ERING-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-ERING-MIB::rcEthRingTable'
Raisecom ethernet ring table.
rcEthRingEntry row .1.3.6.1.4.1.8886.6.1.39.1.1.1
raisecom ethernet ring table entry.
Indexes
Column Syntax OID
rcEthRingIndexAn index uniquely identifies a ERING Ring, which ranges from 1~8.
This value can't be modified after created.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.8886.6.1.39.1.1.1.1
rcEthRingPrimaryPortThe primary port blocked firstly when ring node state changes.
It can't be modified after enabled.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.1.1.2
rcEthRingSecondaryPortThe secondary port; It can't be modified after enabled.SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.1.1.3
rcEthRingPriorityThe priority of bridge,The value 0 signifies the lowest priority
and 255 signifies the highest priority.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.8886.6.1.39.1.1.1.4
rcEthRingEnableThis attribute, while TRUE, indicates that the function
of ethernet ring is enabled(1). The function is disabled(2), otherwise.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.8886.6.1.39.1.1.1.5
rcEthRingDescriptionThe description information of ethernet ring.OctetStringr/w.1.3.6.1.4.1.8886.6.1.39.1.1.1.6
rcEthRingHelloTimeThe value indicates the interval between two hello packets sent by ethernet ring node,
and its unit is second.This value ranges from 1s~10s.
Unsigned32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.8886.6.1.39.1.1.1.7
rcEthRingRestoreDelayThe value indicates the delay time when up happens, and its unit is second.
This value ranges from 0s~180s.
Unsigned32r/w
Constraints:
range: 0-180
.1.3.6.1.4.1.8886.6.1.39.1.1.1.8
rcEthRingHoldTimeThis time value determines the interval length during which no more than two protocol
packet received by this port.
Unsigned32r/w
Constraints:
range: 3-100
.1.3.6.1.4.1.8886.6.1.39.1.1.1.9
rcEthRingProtocolVlanThe Vlan of protocol packet.Unsigned32r/w
Constraints:
range: 2-4094
.1.3.6.1.4.1.8886.6.1.39.1.1.1.10
rcEthRingBridgeStateThe state of designated bridge, including forward,block,down and invalid.
The default bridge state is invalid(0) before ring was created.
Each bridge have two ports,down(1) if at least one port is in the state of DOWN…
Enumeration
Enumerated Values:
0invalid
1down
2block
3forward
.1.3.6.1.4.1.8886.6.1.39.1.1.1.11
rcEthRingCurStateDurationIt means duration since ring state got into stability if the current ring state is stable,
unstable state means duration of the last stable state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.1.1.13
rcEthRingDbMacMac address of the designated bridge.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.8886.6.1.39.1.1.1.14
rcEthRingDbPriThe DB priority of the Ethernet ring.Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.8886.6.1.39.1.1.1.15
rcEthRingDbStateThe state of designated bridge, including forward,block,down and invalid.
The default bridge state is invalid(0) before ring was created.
Each bridge have two ports,down(1) if at least one port is in the state of DOWN…
Enumeration
Enumerated Values:
0invalid
1down
2block
3forward
.1.3.6.1.4.1.8886.6.1.39.1.1.1.16
rcEthRingRowStatusThis object is responsible for managing the creation,
deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.8886.6.1.39.1.1.1.18
.1.3.6.1.4.1.8886.6.1.39.1.2 · 1 row entry · 14 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcEthRingPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-ERING-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-ERING-MIB::rcEthRingPortTable'
Raisecom ethernet ring Port Table.
rcEthRingPortEntry row .1.3.6.1.4.1.8886.6.1.39.1.2.1
Raisecom ethernet ring port table entry.
Column Syntax OID
rcEthRingPortFlagIndexIndex of the port table which corresponding to the specific port statistics uniquely.Unsigned32
Constraints:
range: 1-2
.1.3.6.1.4.1.8886.6.1.39.1.2.1.1
rcEthRingPortPort number corresponding to the index.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.2
rcEthRingPortForwardStateState of ethernet ring port, including block and forward.Enumeration
Enumerated Values:
1block
2forward
.1.3.6.1.4.1.8886.6.1.39.1.2.1.4
rcEthRingDiscoverPeerStatePort state of ethernet ring,including none,discover and full.
none(1)-- two ports of the bridge did not receive any packets from opposite ports;
discover(2)-- at least one port of the bridge received packet before got i…
Enumeration
Enumerated Values:
1none
2discover
3full
.1.3.6.1.4.1.8886.6.1.39.1.2.1.5
rcEthRingPortStateSwitchCountTimes of port state switch between block and forward state.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.6
rcEthRingCurrStateDurationIt means the duration since port got into current state.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.7
rcEthRingRecvHelloPktsPacket number which received from peer device.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.8
rcEthRingRecvChangePktsPacket number which received from peer device.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.9
rcEthRingRecvChangeRelayPktsPacket number which received from peer device.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.10
rcEthRingRecvFlushPktsPacket number which received from peer device.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.11
rcEthRingSendHelloPktsPacket number which received from peer device.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.12
rcEthRingSendChangePktsPacket number which received from peer device.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.13
rcEthRingSendChangeRelayPktsPacket number which received from peer device.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.14
rcEthRingSendFlushPktsPacket number which received from peer device.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.2.1.15
.1.3.6.1.4.1.8886.6.1.39.1.3 · 1 row entry · 6 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcEthRingDeviceListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-ERING-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-ERING-MIB::rcEthRingDeviceListTable'
EthRing Device Table.
rcEthRingDeviceListEntry row .1.3.6.1.4.1.8886.6.1.39.1.3.1
Raisecom ethernet ring device table entry.
Column Syntax OID
rcEthRingDeviceListIndexAn entry in this table is created when hello packet is received.
An entry is removed from this table when its corresponding rcEthRingEntry is deleted.
An implementation MUST start assigning rcEthRingDeviceListIndex val…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.39.1.3.1.1
rcEthRingDeviceListMacThe mac address of bridge in the ethernet ring.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.8886.6.1.39.1.3.1.2
rcEthRingDeviceListPort1One of active port of the device.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.8886.6.1.39.1.3.1.3
rcEthRingDeviceListPort2Another active port of the device.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.8886.6.1.39.1.3.1.4
rcEthRingDeviceListPriorityThe priority of bridge,The value 0 signifies the lowest priority
and 255 signifies the highest priority.
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.8886.6.1.39.1.3.1.5
rcEthRingDeviceListBridgeStateThe state of designated bridge, including forward,block,alone,down and invalid.
The default bridge state is invalid(0) before ring was created.
Each bridge have two ports,down(1) if at least one port is in the state o…
Enumeration
Enumerated Values:
0invalid
1down
2block
3forward
.1.3.6.1.4.1.8886.6.1.39.1.3.1.6