swACLIpRuleCode
SW-DES3x50-ACLMGMT-MIB ·
.1.3.6.1.4.1.171.11.5.2.2.1.9
Object
column
r/w
Integer32
Specific that the rule applies to the value of icmp code traffic.
Context
- MIB
- SW-DES3x50-ACLMGMT-MIB
- OID
.1.3.6.1.4.1.171.11.5.2.2.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swACLIpRuleEntry
- Table
- swACLIpRuleTable
- Siblings
- 20
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swACLIpRuleProfileID The ID of ACL mask entry ,and is unique in the mask list. | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.1 |
| swACLIpRuleSrcPort Specific that the rule applies the range of tcp/udp source port | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.10 |
| swACLIpRuleDstPort Specific the range of tcp/udp destination port range | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.11 |
| swACLIpRuleFlagBits A value which indicates the set of TCP flags that this
entity may potentially offers. The value is a sum. This
sum initially takes the value zero, Then, for each flag, L,
in the… | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.12 |
| swACLIpRuleProtoID Specific that the rule applies to the value of ip protocol id traffic | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.13 |
| swACLIpRuleUserMask Specific that the rule applies to the ip protocol id and the range of
options behind the IP header. | column | OctetString | .1.3.6.1.4.1.171.11.5.2.2.1.14 |
| swACLIpRuleEnablePriority Specifies that the access will apply only to packets with
priority value. | column | Enumeration | .1.3.6.1.4.1.171.11.5.2.2.1.15 |
| swACLIpRulePriority Specifies that the access profile will apply to packets that contain
this value in their 802.1p priority field of their header. | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.16 |
| swACLIpRuleReplacePriority Specific the packets that match the access profile will changed the
802.1p priority tag field by the switch or not . | column | Enumeration | .1.3.6.1.4.1.171.11.5.2.2.1.17 |
| swACLIpRuleEnableReplaceDscp Indicate weather the DSCP field can be over-write or not. | column | Enumeration | .1.3.6.1.4.1.171.11.5.2.2.1.18 |
| swACLIpRuleRepDscp specify a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in t… | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.19 |
| swACLIpRuleAccessID The ID of ACL IP rule entry . | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.2 |
| swACLIpRulePermit This object indicates filter is permit or deny;
default is permit(1) | column | Enumeration | .1.3.6.1.4.1.171.11.5.2.2.1.20 |
| swACLIpRuleRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.11.5.2.2.1.21 |
| swACLIpRuleVlan Specifies that the access will apply to only to this VLAN. | column | OctetString | .1.3.6.1.4.1.171.11.5.2.2.1.3 |
| swACLIpRuleSrcIpaddress Specific an IP source address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.11.5.2.2.1.4 |
| swACLIpRuleDstIpaddress Specific an IP destination address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.11.5.2.2.1.5 |
| swACLIpRuleDscp Specific the value of dscp, the value can be configured 0 to 63 | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.6 |
| swACLIpRuleProtocol Specifies the IP protocol which has been configured in swACLIpEntry . | column | Enumeration | .1.3.6.1.4.1.171.11.5.2.2.1.7 |
| swACLIpRuleType Specific that the rule applies to the value of icmp type traffic. | column | Integer32 | .1.3.6.1.4.1.171.11.5.2.2.1.8 |