SW-DES3x50-ACLMGMT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
6
Rows
6
Columns
84
swACLEthernetTable
table.1.3.6.1.4.1.171.11.5.1.1
·
1 row entry
·
9 columns
This table contain ACL mask of Ethernet information. Access profiles will be created on the switch by row creation and to define which parts of each incoming frame's layer 2 part of header the switch will examine. Masks can be entered that will be combined with the values the switch finds in the specified frame header fields.
A list of information about ACL of Ethernet.
Indexes
swACLEthernetProfileID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
swACLEthernetProfileID
The ID of ACL mask entry ,and is unique in the mask list.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.171.11.5.1.1.1.1 |
||||||||||||
|
swACLEthernetUsevlan
Specifies that the switch will examine the VLAN part of each packet header.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.1.1.2 |
||||||||||||
|
swACLEthernetMacAddrMaskState
This object indicates the status of MAC address mask.
other(1) - Neither source MAC address nor destination MAC address are masked. dst-mac-addr(2) - recieved frames's destination MAC address are … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.1.1.3 |
||||||||||||
|
swACLEthernetSrcMacAddrMask
This object Specifies the MAC address mask for the source MAC address.
|
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.171.11.5.1.1.1.4 |
||||||||||||
|
swACLEthernetDstMacAddrMask
This object Specifies the MAC address mask for the destination MAC address.
|
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.171.11.5.1.1.1.5 |
||||||||||||
|
swACLEthernetUse8021p
Specifies if the switch will examine the 802.1p priority value in the frame's header
or not. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.1.1.6 |
||||||||||||
|
swACLEthernetUseEthernetType
Specifies if the switch will examine the Ethernet type value in each frame's header
or not. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.1.1.7 |
||||||||||||
|
swACLEthernetPort
.
|
OctetStringr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.171.11.5.1.1.1.8 |
||||||||||||
|
swACLEthernetRowStatus
This object indicates the status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.171.11.5.1.1.1.9 |
swACLIpTable
table.1.3.6.1.4.1.171.11.5.1.2
·
1 row entry
·
18 columns
This table contain ACL mask of IP information. Access profiles will be created on the switch by row creation and to define which parts of each incoming frame's IP layer part of header the switch will examine. Masks can be entered that will be combined with the values the switch finds in the specified frame header fields.
A list of information about ACL of IP Layer.
Indexes
swACLIpProfileID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
swACLIpProfileID
The ID of ACL mask entry ,and is unique in the mask list.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.171.11.5.1.2.1.1 |
||||||||||||
|
swACLIpUsevlan
This object indicates if IP layer vlan is examined or not.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.2 |
||||||||||||
|
swACLIpIpAddrMaskState
This object indicates the status of IP address mask.
other(1) - Neither source IP address nor destination IP address are masked. dst-ip-addr(2) - recieved frames's destination IP address are cu… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.3 |
||||||||||||
|
swACLIpSrcIpAddrMask
This object Specifies IP address mask for the source IP address.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.11.5.1.2.1.4 |
||||||||||||
|
swACLIpDstIpAddrMask
This object Specifies the IP address mask for the destination IP address.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.11.5.1.2.1.5 |
||||||||||||
|
swACLIpUseDSCP
This object indicates DSCP protocol is is examined or not.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.6 |
||||||||||||
|
swACLIpUseProtoType
That object indicates which protocol will be examined.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.7 |
||||||||||||
|
swACLIpIcmpOption
This object indicates which fields should be filled in of ICMP.
none(1)- two fields are null. type(2)- type field should be filled in. code(3)- code field should be filled in. type-code(4)- not only type fileld b… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.8 |
||||||||||||
|
swACLIpIgmpOption
This object indicates Options of IGMP is examined or not.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.9 |
||||||||||||
|
swACLIpTcpOption
This object indicates the status of filtered address of TCP.
other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's destination port are currently used to be fi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.10 |
||||||||||||
|
swACLIpUdpOption
This object indicates the status of filtered address of UDP .
other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's destination port are currently used… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.11 |
||||||||||||
|
swACLIpTCPorUDPSrcPortMask
Specifies a TCP port mask for the source port if swACLIpUseProtoType is TCP
Specifies a UDP port mask for the source port if swACLIpUseProtoType is UDP. |
OctetStringr/w Constraints: range: 2-2 |
.1.3.6.1.4.1.171.11.5.1.2.1.12 |
||||||||||||
|
swACLIpTCPorUDPDstPortMask
Specifies a TCP port mask for the destination port if swACLIpUseProtoType is TCP
Specifies a UDP port mask for the destination port if swACLIpUseProtoType is UDP. |
OctetStringr/w Constraints: range: 2-2 |
.1.3.6.1.4.1.171.11.5.1.2.1.13 |
||||||||||||
|
swACLIpTCPFlagBit
Specifies a TCP connection flag mask.
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.171.11.5.1.2.1.14 |
||||||||||||
|
swACLIpProtoIDOption
Specifies that the switch will examine each frame's Protocol ID field or not.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.15 |
||||||||||||
|
swACLIpProtoIDMask
Specifies that the rule applies to the IP protocol ID and the mask options
behind the IP header. |
OctetStringr/w Constraints: range: 4-4 |
.1.3.6.1.4.1.171.11.5.1.2.1.16 |
||||||||||||
|
swACLIpPort
.
|
OctetStringr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.171.11.5.1.2.1.17 |
||||||||||||
|
swACLIpRowStatus
This object indicates the status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.171.11.5.1.2.1.18 |
swACLPayloadTable
table.1.3.6.1.4.1.171.11.5.1.3
·
1 row entry
·
8 columns
Indexes
swACLPayloadProfileID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
swACLPayloadProfileID
.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.171.11.5.1.3.1.1 |
||||||||||||
|
swACLPayloadOffSet0to15
.
|
OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.1.3.1.2 |
||||||||||||
|
swACLPayloadOffSet16to31
.
|
OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.1.3.1.3 |
||||||||||||
|
swACLPayloadOffSet32to47
.
|
OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.1.3.1.4 |
||||||||||||
|
swACLPayloadOffSet48to63
.
|
OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.1.3.1.5 |
||||||||||||
|
swACLPayloadOffSet64to79
.
|
OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.1.3.1.6 |
||||||||||||
|
swACLPayloadPort
.
|
OctetStringr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.171.11.5.1.3.1.7 |
||||||||||||
|
swACLPayloadRowStatus
.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.171.11.5.1.3.1.8 |
swACLEtherRuleTable
table.1.3.6.1.4.1.171.11.5.2.1
·
1 row entry
·
14 columns
This table contain ACL rule of ethernet information.
A list of information about ACL rule of the layer 2 part of each packet.
Indexes
swACLEtherRuleProfileID swACLEtherRuleAccessID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
swACLEtherRuleProfileID
The ID of ACL mask entry ,and is unique in the mask list.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.171.11.5.2.1.1.1 |
||||||||||||
|
swACLEtherRuleAccessID
The ID of ACL rule entry relate to swACLEtherRuleProfileID.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.171.11.5.2.1.1.2 |
||||||||||||
|
swACLEtherRuleVlan
Specifies that the access will apply to only to this VLAN.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.171.11.5.2.1.1.3 |
||||||||||||
|
swACLEtherRuleSrcMacAddress
Specifies that the access will apply to only packets with
this source MAC address. |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.171.11.5.2.1.1.4 |
||||||||||||
|
swACLEtherRuleDstMacAddress
Specifies that the access will apply to only packets
with this destination MAC address. |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.171.11.5.2.1.1.5 |
||||||||||||
|
swACLEtherRule8021P
Specifies that the access will apply only to packets with
this 802.1p priority value. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.171.11.5.2.1.1.6 |
||||||||||||
|
swACLEtherRuleEtherType
Specifies that the access will apply only to packets with this
hexidecimal 802.1Q Ethernet type value in the packet header. |
OctetStringr/w Constraints: range: 2-2 |
.1.3.6.1.4.1.171.11.5.2.1.1.7 |
||||||||||||
|
swACLEtherRuleEnablePriority
Specifies that the access will apply only to packets with
priority value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.1.1.8 |
||||||||||||
|
swACLEtherRulePriority
Specific the priority will change to the packets while the swACLEtherRuleReplacePriority
is enabled . |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.171.11.5.2.1.1.9 |
||||||||||||
|
swACLEtherRuleReplacePriority
Specific the packets that match the access profile will changed the
802.1p priority tag field by the switch or not . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.1.1.10 |
||||||||||||
|
swACLEtherRuleEnableReplaceDscp
Specific the packets that match the access profile will replaced the
DSCP field by the switch or not . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.1.1.11 |
||||||||||||
|
swACLEtherRuleRepDscp
specify a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet. |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.171.11.5.2.1.1.12 |
||||||||||||
|
swACLEtherRulePermit
This object indicates resoult of examination is permit or deny;default is permit(1)
permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.1.1.13 |
||||||||||||
|
swACLEtherRuleRowStatus
This object indicates the status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.171.11.5.2.1.1.14 |
swACLIpRuleTable
table.1.3.6.1.4.1.171.11.5.2.2
·
1 row entry
·
21 columns
.
.
Indexes
swACLIpRuleProfileID swACLIpRuleAccessID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
swACLIpRuleProfileID
The ID of ACL mask entry ,and is unique in the mask list.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.171.11.5.2.2.1.1 |
||||||||||||
|
swACLIpRuleAccessID
The ID of ACL IP rule entry .
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.171.11.5.2.2.1.2 |
||||||||||||
|
swACLIpRuleVlan
Specifies that the access will apply to only to this VLAN.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.171.11.5.2.2.1.3 |
||||||||||||
|
swACLIpRuleSrcIpaddress
Specific an IP source address.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.11.5.2.2.1.4 |
||||||||||||
|
swACLIpRuleDstIpaddress
Specific an IP destination address.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.11.5.2.2.1.5 |
||||||||||||
|
swACLIpRuleDscp
Specific the value of dscp, the value can be configured 0 to 63
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.171.11.5.2.2.1.6 |
||||||||||||
|
swACLIpRuleProtocol
Specifies the IP protocol which has been configured in swACLIpEntry .
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.2.1.7 |
||||||||||||
|
swACLIpRuleType
Specific that the rule applies to the value of icmp type traffic.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.171.11.5.2.2.1.8 |
||||||||||||
|
swACLIpRuleCode
Specific that the rule applies to the value of icmp code traffic.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.171.11.5.2.2.1.9 |
||||||||||||
|
swACLIpRuleSrcPort
Specific that the rule applies the range of tcp/udp source port
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.171.11.5.2.2.1.10 |
||||||||||||
|
swACLIpRuleDstPort
Specific the range of tcp/udp destination port range
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.171.11.5.2.2.1.11 |
||||||||||||
|
swACLIpRuleFlagBits
A value which indicates the set of TCP flags that this
entity may potentially offers. The value is a sum. This sum initially takes the value zero, Then, for each flag, L, in the range 1 through 6, that this node perfo… |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.171.11.5.2.2.1.12 |
||||||||||||
|
swACLIpRuleProtoID
Specific that the rule applies to the value of ip protocol id traffic
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.171.11.5.2.2.1.13 |
||||||||||||
|
swACLIpRuleUserMask
Specific that the rule applies to the ip protocol id and the range of
options behind the IP header. |
OctetStringr/w Constraints: range: 4-4 |
.1.3.6.1.4.1.171.11.5.2.2.1.14 |
||||||||||||
|
swACLIpRuleEnablePriority
Specifies that the access will apply only to packets with
priority value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.2.1.15 |
||||||||||||
|
swACLIpRulePriority
Specifies that the access profile will apply to packets that contain
this value in their 802.1p priority field of their header. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.171.11.5.2.2.1.16 |
||||||||||||
|
swACLIpRuleReplacePriority
Specific the packets that match the access profile will changed the
802.1p priority tag field by the switch or not . |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.2.1.17 |
||||||||||||
|
swACLIpRuleEnableReplaceDscp
Indicate weather the DSCP field can be over-write or not.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.2.1.18 |
||||||||||||
|
swACLIpRuleRepDscp
specify a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet. |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.171.11.5.2.2.1.19 |
||||||||||||
|
swACLIpRulePermit
This object indicates filter is permit or deny;
default is permit(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.2.1.20 |
||||||||||||
|
swACLIpRuleRowStatus
This object indicates the status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.171.11.5.2.2.1.21 |
swACLPayloadRuleTable
table.1.3.6.1.4.1.171.11.5.2.3
·
1 row entry
·
14 columns
Indexes
swACLPayloadRuleProfileID swACLPayloadRuleAccessID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swACLPayloadRuleProfileID | Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.171.11.5.2.3.1.1 |
||||||||||||
| swACLPayloadRuleAccessID | Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.171.11.5.2.3.1.2 |
||||||||||||
| swACLPayloadRuleOffSet0to15 | OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.2.3.1.3 |
||||||||||||
| swACLPayloadRuleOffSet16to31 | OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.2.3.1.4 |
||||||||||||
| swACLPayloadRuleOffSet32to47 | OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.2.3.1.5 |
||||||||||||
| swACLPayloadRuleOffSet48to63 | OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.2.3.1.6 |
||||||||||||
| swACLPayloadRuleOffSet64to79 | OctetStringr/w Constraints: range: 16-16 |
.1.3.6.1.4.1.171.11.5.2.3.1.7 |
||||||||||||
| swACLPayloadRuleEnablePriority | Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.3.1.8 |
||||||||||||
|
swACLPayloadRulePriority
Specifies that the access profile will apply to packets that contain
this value in their 802.1p priority field of their header. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.171.11.5.2.3.1.9 |
||||||||||||
| swACLPayloadRuleReplacePriority | Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.3.1.10 |
||||||||||||
|
swACLPayloadRuleEnableReplaceDscp
Indicate wether the DSCP field can be over-write or not
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.3.1.11 |
||||||||||||
|
swACLPayloadRuleRepDscp
specify a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet. |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.171.11.5.2.3.1.12 |
||||||||||||
| swACLPayloadRulePermit | Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.171.11.5.2.3.1.13 |
||||||||||||
| swACLPayloadRuleRowStatus | SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.171.11.5.2.3.1.14 |