fsMplsTpMeMpIfIndex

SUPERMICRO-MPLS-TP-OAM-MIB · .1.3.6.1.4.1.10876.101.1.13.9.1.3.1.4
Commands MIB view Table view

Object

column r/w IF-MIBInterfaceIndexOrZero 
Indicates the maintenance point interface.
If the fsMplsTpMegMpLocation object value is perNode (1), 
the MP interface index should point to incoming interface or 
outgoing interface or zero (indicates the MP OAM packets are 
initiated from forwarding engine).
              
If the fsMplsTpMegMpLocation object value is perInterface (2),
the MP interface index should point to incoming interface or 
outgoing interface.

Context

MIB
SUPERMICRO-MPLS-TP-OAM-MIB
OID
.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.4
Type
column
Access
readwrite
Status
current
Parent
fsMplsTpMeEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MPLS-TP-OAM-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MPLS-TP-OAM-MIB::fsMplsTpMeMpIfIndex'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'SUPERMICRO-MPLS-TP-OAM-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MPLS-TP-OAM-MIB::fsMplsTpMeMpIfIndex.<fsMplsTpContextId>.<fsMplsTpMegIndex>.<fsMplsTpMeIndex>.<fsMplsTpMeMpIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'SUPERMICRO-MPLS-TP-OAM-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SUPERMICRO-MPLS-TP-OAM-MIB::fsMplsTpMeMpIfIndex'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647