SUPERMICRO-MPLS-TP-OAM-MIB Table View

This table contains information about the Maintenance Entity
Groups (MEG). 
          
MEG as mentioned in MPLS-TP OAM framework defines a set of one or
more maintenance entities (ME). Maintenance Entities define a
relationship between any two points of a transport path in an OAM
doamin to which maintenance and monitoring operations apply.

fsMplsTpMegEntry row .1.3.6.1.4.1.10876.101.1.13.9.1.2.1

An entry in this table represents MPLS-TP MEG.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS-TP OAM Framework.

When a new entry is created with fsMplsTpMegO…

Indexes

SUPERMICRO-MPLS-TP-MIBfsMplsTpContextId fsMplsTpMegIndex

Column	Syntax	OID
fsMplsTpMegIndex Index for the conceptual row identifying a MEG within this MEG table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.9.1.2.1.1
fsMplsTpMegName Each Maintenance Entity Group has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each MEG. Note:…	OctetStringr/w Constraints: range: 1-48	.1.3.6.1.4.1.10876.101.1.13.9.1.2.1.2
fsMplsTpMegOperatorType Indicates the operator type for MEG. Conceptual rows having 'iccBased' as operator type, should have valid values for the objects fsMplsTpMegIdIcc and fsMplsTpMegIdUmc while making the row status active.	Enumerationr/w Enumerated Values: 1 ipCompatible 2 iccBased	.1.3.6.1.4.1.10876.101.1.13.9.1.2.1.3
fsMplsTpMegIdIcc Unique code assigned to Network Operator or Service Provider maintained by ITU-T. The ITU Carrier Code used to form MEGID. This object should to be configured, if fsMplsTpMegOperatorType object value is configured as i…	OctetStringr/w Constraints: range: 1-6	.1.3.6.1.4.1.10876.101.1.13.9.1.2.1.4
fsMplsTpMegIdUmc Unique code assigned by Network Operator or Service Provider and is appended to fsMplsTpMegIdIcc to form the MEGID. The unique MEGID Code used to form MEGID. This object should to be configured, if fsMplsTpMegOperatorT…	OctetStringr/w Constraints: range: 1-7	.1.3.6.1.4.1.10876.101.1.13.9.1.2.1.5
fsMplsTpMegServiceType Indicates the service type for which the MEG is created. If the value is lsp, the service pointer in fsMplsTpMeTable points to the TE tunnel table entry. If the value is pseudowire, the ser…	Enumerationr/w Enumerated Values: 1 lsp 2 pseudowire 3 section	.1.3.6.1.4.1.10876.101.1.13.9.1.2.1.6
fsMplsTpMegMpLocation Indicates the MP location type for this MEG. If the value is perNode, then the MEG in the LSR supports only pernode MEP/MIP, i.e., only one MEP/MIP in an LSR. If the value is perInterface, …	Enumerationr/w Enumerated Values: 1 perNode 2 perInterface	.1.3.6.1.4.1.10876.101.1.13.9.1.2.1.7
fsMplsTpMegRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except fsMplsTpMegRowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.9.1.2.1.8

This table contains MPLS-TP maintanece entity information.
          
ME is some portion of a transport path that requires
management bounded by two points (called MEPs), and the
relationship between those points to which maintenance and
monitoring operations apply.
          
This table is generic enough to handle MEPs and MIPs informations 
within a MEG.

fsMplsTpMeEntry row .1.3.6.1.4.1.10876.101.1.13.9.1.3.1

An entry in this table represents MPLS-TP maintanence entity.
This entry represents the ME if the source and sink MEPs are defined.
An ME is a p2p entity. One ME has two such MEPs.
A MEG is a group of one or more MEs. O…

Indexes

SUPERMICRO-MPLS-TP-MIBfsMplsTpContextId fsMplsTpMegIndex fsMplsTpMeIndex fsMplsTpMeMpIndex

Column	Syntax	OID
fsMplsTpMeIndex Uniquely identifies a maintenance entity index within a MEG.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.1
fsMplsTpMeMpIndex Indicates the maintenance point index. The value of this object can be MEP index or MIP index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.2
fsMplsTpMeName This object denotes the ME name, each Maintenance Entity has unique name within MEG.	OctetStringr/w Constraints: range: 1-48	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.3
fsMplsTpMeMpIfIndex Indicates the maintenance point interface. If the fsMplsTpMegMpLocation object value is perNode (1), the MP interface index should point to incoming interface or outgoing interface or zero (indicates the MP OAM packet…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.4
fsMplsTpMeSourceMepIndex Indicates the source MEP Index of the ME. This object should be configured if fsMplsTpMegOperatorType object in the fsMplsTpMegEntry is configured as iccBased (2). If the MEG is configured for IP based operator, the …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.5
fsMplsTpMeSinkMepIndex Indicates the sink MEP Index of the ME. This object should be configured if fsMplsTpMegOperatorType object in the fsMplsTpMegEntry is configured as iccBased (2). If the MEG is configured for IP based operator, the v…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.6
fsMplsTpMeMpType Indicates the maintanence point type within the MEG. The object should have the value mep (1), only in the Ingress or Egress nodes of the transport path. The object can have the value mip…	Enumerationr/w Enumerated Values: 1 mep 2 mip	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.7
fsMplsTpMeMepDirection Indicates the direction of the MEP. This object should be configured if fsMplsTpMeMpType is configured as mep (1).	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.8
fsMplsTpMeProactiveOamSessIndex Indicates the proactive session index for this MP. When a proactive session for this MP is established, the application has to update this object with the session index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.9
fsMplsTpMeProactiveOamPhbTCValue Indicates the PHB value for this source MEP generated proactive traffic.	Enumerationr/w Enumerated Values: 1 ef1 2 ef2 3 af1 4 af2 5 af3 6 be	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.10
fsMplsTpMeOnDemandOamPhbTCValue Indicates the PHB value for this source MEP generated ondemand traffic.	Enumerationr/w Enumerated Values: 1 ef1 2 ef2 3 af1 4 af2 5 af3 6 be	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.11
fsMplsTpMeServiceSignaled Indicates whether the service associated with ME is created by signaling or static.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.12
fsMplsTpMeServicePointer This variable represents a pointer to the MPLS-TP transport path. This value may point at an entry in the mplsTunnelEntry if fsMplsTpMegServiceType is configured as lsp (1) or at an entry in the pwEntry if fsMplsTpMeg…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.13
fsMplsTpMeRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except fsMplsTpMeRowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.13.9.1.3.1.14