fsDot1dStpBridgeHelloTime

SUPERMICRO-MIStdBRIDGE-MIB · .1.3.6.1.4.1.10876.101.1.116.2.1.1.14
MIB view Table view

Object

column r/w centi-seconds Integer32 
The value that all bridges use for HelloTime when
this bridge is acting as the root.  The
granularity of this timer is specified by 802.1D-
1990 to be 1 second.  An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.

Context

MIB
SUPERMICRO-MIStdBRIDGE-MIB
OID
.1.3.6.1.4.1.10876.101.1.116.2.1.1.14
Type
column
Access
readwrite
Status
current
Units
centi-seconds
Parent
fsDot1dStpEntry
Table
fsDot1dStpTable
Siblings
14

Syntax

centi-seconds Integer32

Values & Constraints

Object Constraints
range: 100-100 range: 200-200

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsDot1dStpContextId
Virtual Bridge number
columnInteger32.1.3.6.1.4.1.10876.101.1.116.2.1.1.1
fsDot1dStpHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hund…
columncenti-seconds Timeout.1.3.6.1.4.1.10876.101.1.116.2.1.1.10
fsDot1dStpHoldTime
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
columncenti-seconds SNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.116.2.1.1.11
fsDot1dStpForwardDelay
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines h…
columncenti-seconds Timeout.1.3.6.1.4.1.10876.101.1.116.2.1.1.12
fsDot1dStpBridgeMaxAge
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of fsD…
columncenti-seconds Integer32.1.3.6.1.4.1.10876.101.1.116.2.1.1.13
fsDot1dStpBridgeForwardDelay
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value …
columncenti-seconds Integer32.1.3.6.1.4.1.10876.101.1.116.2.1.1.15
fsDot1dStpProtocolSpecification
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementat…
columnEnumeration.1.3.6.1.4.1.10876.101.1.116.2.1.1.2
fsDot1dStpPriority
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the valu…
columnInteger32.1.3.6.1.4.1.10876.101.1.116.2.1.1.3
fsDot1dStpTimeSinceTopologyChange
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. For RSTP, this reports the time since the tcWhile timer for any port …
columncenti-seconds SNMPv2-SMITimeTicks.1.3.6.1.4.1.10876.101.1.116.2.1.1.4
fsDot1dStpTopChanges
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.116.2.1.1.5
fsDot1dStpDesignatedRoot
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter i…
columnBridgeId.1.3.6.1.4.1.10876.101.1.116.2.1.1.6
fsDot1dStpRootCost
The cost of the path to the root as seen from this bridge.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.116.2.1.1.7
fsDot1dStpRootPort
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.116.2.1.1.8
fsDot1dStpMaxAge
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value th…
columncenti-seconds Timeout.1.3.6.1.4.1.10876.101.1.116.2.1.1.9