SUPERMICRO-MIStdBRIDGE-MIB Table View

List of per Virtual Bridge Module Parameters.

fsDot1dBaseEntry row .1.3.6.1.4.1.10876.101.1.116.1.1.1

Virtual Bridge Rst Module Parameters.

Indexes

fsDot1dBaseContextId

Column	Syntax	OID
fsDot1dBaseContextId Virtual Bridge number	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.116.1.1.1.1
fsDot1dBaseBridgeAddress The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only req…	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.10876.101.1.116.1.1.1.2
fsDot1dBaseNumPorts The number of ports controlled by this bridging entity.	portsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.116.1.1.1.3
fsDot1dBaseType Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.	Enumeration Enumerated Values: 1 unknown 2 transparentonly 3 sourcerouteonly 4 srt	.1.3.6.1.4.1.10876.101.1.116.1.1.1.4

A table that contains generic information about
every port that is associated with this bridge.
 Transparent, source-route, and srt ports are
included.

fsDot1dBasePortEntry row .1.3.6.1.4.1.10876.101.1.116.1.2.1

A list of information for each port of the
bridge.

Indexes

fsDot1dBasePort

Column	Syntax	OID
fsDot1dBasePort The port number of the port for which this entry contains bridge management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.116.1.2.1.1
fsDot1dBasePortIfIndex The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.10876.101.1.116.1.2.1.2
fsDot1dBasePortCircuit For a port which (potentially) has the same value of fsDot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where mu…	ObjectIdentifier	.1.3.6.1.4.1.10876.101.1.116.1.2.1.3
fsDot1dBasePortDelayExceededDiscards The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.1.2.1.4
fsDot1dBasePortMtuExceededDiscards The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.1.2.1.5

Table of StpScalars per virtual bridge

fsDot1dStpEntry row .1.3.6.1.4.1.10876.101.1.116.2.1.1

Per bridge StpScalars

Indexes

fsDot1dStpContextId

Column	Syntax	OID
fsDot1dStpContextId Virtual Bridge number	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.116.2.1.1.1
fsDot1dStpProtocolSpecification An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If fut…	Enumeration Enumerated Values: 1 unknown 2 decLb100 3 ieee8021d	.1.3.6.1.4.1.10876.101.1.116.2.1.1.2
fsDot1dStpPriority The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of fsDot1dBaseBridgeAddress. On bridge…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.116.2.1.1.3
fsDot1dStpTimeSinceTopologyChange The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. For RSTP, this reports the time since the tcWhile timer for any port on this Bridge was nonzero.	centi-secondsSNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.2.1.1.4
fsDot1dStpTopChanges The total number of topology changes detected by this bridge since the management entity was last reset or initialized.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.2.1.1.5
fsDot1dStpDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originat…	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.1.116.2.1.1.6
fsDot1dStpRootCost The cost of the path to the root as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.116.2.1.1.7
fsDot1dStpRootPort The port number of the port which offers the lowest cost path from this bridge to the root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.116.2.1.1.8
fsDot1dStpMaxAge The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.	centi-secondsTimeout	.1.3.6.1.4.1.10876.101.1.116.2.1.1.9
fsDot1dStpHelloTime The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual v…	centi-secondsTimeout	.1.3.6.1.4.1.10876.101.1.116.2.1.1.10
fsDot1dStpHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	centi-secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.116.2.1.1.11
fsDot1dStpForwardDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Li…	centi-secondsTimeout	.1.3.6.1.4.1.10876.101.1.116.2.1.1.12
fsDot1dStpBridgeMaxAge The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of fsDot1dStpBridgeHelloTime. The granularity …	centi-secondsInteger32r/w Constraints: range: 600-4000	.1.3.6.1.4.1.10876.101.1.116.2.1.1.13
fsDot1dStpBridgeHelloTime The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempte…	centi-secondsInteger32r/w Constraints: range: 100-100 range: 200-200	.1.3.6.1.4.1.10876.101.1.116.2.1.1.14
fsDot1dStpBridgeForwardDelay The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of fsDot1dStpBridgeMaxAge. The granular…	centi-secondsInteger32r/w Constraints: range: 400-3000	.1.3.6.1.4.1.10876.101.1.116.2.1.1.15

A table that contains port-specific information
for the Spanning Tree Protocol.

fsDot1dStpPortEntry row .1.3.6.1.4.1.10876.101.1.116.2.2.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

fsDot1dStpPort

Column	Syntax	OID
fsDot1dStpPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.116.2.2.1.1
fsDot1dStpPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of fsDot1dStpPort. On bridges supporting…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.116.2.2.1.2
fsDot1dStpPortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will …	Enumeration Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.10876.101.1.116.2.2.1.3
fsDot1dStpPortEnable The enabled/disabled status of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.116.2.2.1.4
fsDot1dStpPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.116.2.2.1.5
fsDot1dStpPortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.1.116.2.2.1.6
fsDot1dStpPortDesignatedCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.116.2.2.1.7
fsDot1dStpPortDesignatedBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.10876.101.1.116.2.2.1.8
fsDot1dStpPortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.10876.101.1.116.2.2.1.9
fsDot1dStpPortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.2.2.1.10
fsDot1dStpPortPathCost32 The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.10876.101.1.116.2.2.1.11

Table of Tp per virtual bridge

fsDot1dTpEntry row .1.3.6.1.4.1.10876.101.1.116.4.1.1

Per bridge TpScalars

Indexes

fsDot1dBaseContextId

Column	Syntax	OID
fsDot1dTpLearnedEntryDiscards The total number of Forwarding Database entries, which have been or would have been learned, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it in…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.4.1.1.1
fsDot1dTpAgingTime The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1998 recommends a default of 300 seconds.	secondsInteger32r/w Constraints: range: 10-1000000	.1.3.6.1.4.1.10876.101.1.116.4.1.1.2

A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information.  This information is used
by the transparent bridging function in
determining how to propagate a received frame. This 
table maintains context ID as one more index to 
support Multiple Instances.

fsDot1dTpFdbEntry row .1.3.6.1.4.1.10876.101.1.116.4.2.1

Information about a specific unicast MAC address
for which the bridge has some forwarding and/or
filtering information.

Indexes

fsDot1dBaseContextId fsDot1dTpFdbAddress

Column	Syntax	OID
fsDot1dTpFdbAddress A unicast MAC address for which the bridge has forwarding and/or filtering information.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.10876.101.1.116.4.2.1.1
fsDot1dTpFdbPort Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of fsDot1dTpFdbAddress has been seen. A value of '0' indicates that the por…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.116.4.2.1.2
fsDot1dTpFdbStatus The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (n…	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.10876.101.1.116.4.2.1.3

A table that contains information about every
port that is associated with this transparent
bridge.

fsDot1dTpPortEntry row .1.3.6.1.4.1.10876.101.1.116.4.3.1

A list of information for each port of a
transparent bridge.

Indexes

fsDot1dTpPort

Column	Syntax	OID
fsDot1dTpPort The port number of the port for which this entry contains Transparent bridging management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.10876.101.1.116.4.3.1.1
fsDot1dTpPortMaxInfo The maximum size of the INFO (non-MAC) field that this port will receive or transmit.	bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.116.4.3.1.2
fsDot1dTpPortInFrames The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.4.3.1.3
fsDot1dTpPortOutFrames The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol …	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.4.3.1.4
fsDot1dTpPortInDiscards Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.4.3.1.5

A table containing filtering information 
configured into the bridge by (local or network) 
management specifying the set of ports to which 
frames received from specific ports and containing 
specific destination addresses are allowed to be 
forwarded.  The value of zero in this table as the 
port number from which frames with a specific 
destination address are received, is used to 
specify all ports for which there is no specific 
entry in this table for that particular 
destination address.  Entries are valid for 
unicast and for group/broadcast addresses.This 
table maintains context ID as one more index to 
support Multiple Instances.

fsDot1dStaticEntry row .1.3.6.1.4.1.10876.101.1.116.5.1.1

Filtering information configured into the bridge
by (local or network) management specifying the
set of ports to which frames received from a
specific port and containing a specific
destination address are allowed t…

Indexes

fsDot1dBaseContextId fsDot1dStaticAddress fsDot1dStaticReceivePort

Column	Syntax	OID
fsDot1dStaticAddress The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.10876.101.1.116.5.1.1.1
fsDot1dStaticReceivePort Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of th…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.116.5.1.1.2
fsDot1dStaticRowStatus This object indicates the status of the AllowedToGoTo PortList to which a frame with a specific unicast address will be flooded in the event that it has not been learned. To fill the AllowedToGoTo portlist, we have to s…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.116.5.1.1.3
fsDot1dStaticStatus This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so a…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 permanent 4 deleteOnReset 5 deleteOnTimeout	.1.3.6.1.4.1.10876.101.1.116.5.1.1.4

A table containing the information of AllowedToGoTo
ports for each static unicast entry. This table
maintains context ID as one more index to support
Multiple Instances.

fsDot1dStaticAllowedToGoEntry row .1.3.6.1.4.1.10876.101.1.116.5.2.1

Information about a port, Whether it is an AllowedToGoTo
member or not.

Indexes

fsDot1dBaseContextId fsDot1dStaticAddress fsDot1dStaticReceivePort fsDot1dTpPort

Column	Syntax	OID
fsDot1dStaticAllowedIsMember Indicates whether the port is an allowedToGoTo member.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.116.5.2.1.1