fsMIRipRtCount
SUPERMICRO-MIRIP2-MIB ·
.1.3.6.1.4.1.10876.101.1.151.1.1.1.16
Object
column
SNMPv2-SMIInteger32
The number of routes in a particular context
Context
- MIB
- SUPERMICRO-MIRIP2-MIB
- OID
.1.3.6.1.4.1.10876.101.1.151.1.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMIRip2GlobalEntry
- Table
- fsMIRip2GlobalTable
- Siblings
- 15
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIRipContextId Identifies the Rip Domain Context. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.151.1.1.1.1 |
| fsMIRip2OverSubscriptionTimeout Over subscription timeout value as mentioned in RFC 2091.When a
Circuit DOWN message is received from the circuit manager, this
timer will be started for the specified timeout va… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.151.1.1.1.10 |
| fsMIRip2Propagate Is propagation of static route is enabled or not. If it
is enabled then routing protocols (like RIP) are allowed
to include static routes in the update messages. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.151.1.1.1.11 |
| fsMIRipTrcFlag Enables the tracing in the RIP. A 32 bit integer
is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.151.1.1.1.12 |
| fsMIRipRowStatus The row status variable, used according to
row installation and removal conventions. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.1.151.1.1.1.13 |
| fsMIRipAdminStatus The administrative status of RIP in a particular
router context. The value 'enabled' denotes that
the RIP Process is active; 'disabled' disables it
on all inter-faces. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.151.1.1.1.14 |
| fsMIRip2LastAuthKeyLifetimeStatus A flag that decides whether the last authentication key on expiry,
should take its lifetime to be infinite or not. If this object is set
to true the last key on expiry resets its… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.151.1.1.1.15 |
| fsMIRip2Security A variable denotes the security level of RIP-2
in the system. The value `minimumSecurity` denotes
that the RIP1 packets will be accepted even when
authentication is in use. The va… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.151.1.1.1.2 |
| fsMIRip2Peers The maximum number of peers that can be in conversation
with the RIP2 system simultaneously | column | Integer32 | .1.3.6.1.4.1.10876.101.1.151.1.1.1.3 |
| fsMIRip2TrustNBRListEnable The status of neighbor list in the router.
The value 'enabled' denotes that a list of
router's IP address can be configured and
RIP Packets from those router's will be processed … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.151.1.1.1.4 |
| fsMIRip2NumberOfDroppedPkts Number of RIP Packets dropped because of
neighbor list check. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.151.1.1.1.5 |
| fsMIRip2SpacingEnable Whether spacing is enabled or not. If spacing
is enabled, generation of periodic update packet
will be split and send. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.151.1.1.1.6 |
| fsMIRip2AutoSummaryStatus This object specify the auto-summary status.If
enabled, summary routes are sent in regular updates for
both rip v1 and v2.If split hoizon is enabled, summary
is sent only if a… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.151.1.1.1.7 |
| fsMIRip2RetransTimeoutInt The timeout interval to be used to retransmit the Update
request packet or an unacknowledged update response packet. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.151.1.1.1.8 |
| fsMIRip2MaxRetransmissions The maximum number of retransmissions of the update request and
update response packets. If no response is received then the routes
via the next hop router are marked unreachabl… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.151.1.1.1.9 |