SUPERMICRO-MIRIP2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
73

fsMIRip2GlobalTable

table
.1.3.6.1.4.1.10876.101.1.151.1.1 · 1 row entry · 16 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRip2GlobalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRip2GlobalTable' 
This Table Contains the list of globals for a
Context.
fsMIRip2GlobalEntry row .1.3.6.1.4.1.10876.101.1.151.1.1.1
An entry of fsMIRip2GlobalTable.
Indexes
Column Syntax OID
fsMIRipContextId
Identifies the Rip Domain Context.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.1
fsMIRip2Security
A variable denotes the security level of RIP-2
in the system. The value `minimumSecurity` denotes
that the RIP1 packets will be accepted even when
authentication is in use. The value `maximumSecurity`
denotes that RIP1 …
Enumerationr/w
Enumerated Values:
1minimumSecurity
2maximumSecurity
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.2
fsMIRip2Peers
The maximum number of peers that can be in conversation
with the RIP2 system simultaneously
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.3
fsMIRip2TrustNBRListEnable
The status of neighbor list in the router.
The value 'enabled' denotes that a list of
router's IP address can be configured and
RIP Packets from those router's will be processed
by RIP and packets from other Routers w…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.4
fsMIRip2NumberOfDroppedPkts
Number of RIP Packets dropped because of
neighbor list check.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.5
fsMIRip2SpacingEnable
Whether spacing is enabled or not. If spacing
is enabled, generation of periodic update packet
will be split and send.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.6
fsMIRip2AutoSummaryStatus
This object specify the auto-summary status.If
enabled, summary routes are sent in regular updates for
both rip v1 and v2.If split hoizon is enabled, summary
is sent only if atlest one subnet route is learned over
…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.7
fsMIRip2RetransTimeoutInt
The timeout interval to be used to retransmit the Update
request packet or an unacknowledged update response packet.
Integer32r/w
Constraints:
range: 5-10
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.8
fsMIRip2MaxRetransmissions
The maximum number of retransmissions of the update request and
update response packets. If no response is received then the routes
via the next hop router are marked unreachable.
Integer32r/w
Constraints:
range: 10-40
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.9
fsMIRip2OverSubscriptionTimeout
Over subscription timeout value as mentioned in RFC 2091.When a
Circuit DOWN message is received from the circuit manager, this
timer will be started for the specified timeout value.
Integer32r/w
Constraints:
range: 100-300
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.10
fsMIRip2Propagate
Is propagation of static route is enabled or not. If it
is enabled then routing protocols (like RIP) are allowed
to include static routes in the update messages.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.11
fsMIRipTrcFlag
Enables the tracing in the RIP. A 32 bit integer
is used to store the Tracing level in the specified module.
Different Tracing Levels -
BIT 0 - Initialisation and Shutdown Trace.
BIT 1 - Management trace.
BIT 2 - Data p…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.12
fsMIRipRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.13
fsMIRipAdminStatus
The administrative status of RIP in a particular
router context. The value 'enabled' denotes that
the RIP Process is active; 'disabled' disables it
on all inter-faces.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.14
fsMIRip2LastAuthKeyLifetimeStatus
A flag that decides whether the last authentication key on expiry,
should take its lifetime to be infinite or not. If this object is set
to true the last key on expiry resets its lifetime to be infinite and
continues …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.15
fsMIRipRtCount
The number of routes in a particular context
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.1.1.16

fsMIRip2NBRTrustListTable

table
.1.3.6.1.4.1.10876.101.1.151.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRip2NBRTrustListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRip2NBRTrustListTable' 
This table contains a list of Router addresses 
from which you can receive RIP Packets
fsMIRip2NBRTrustListEntry row .1.3.6.1.4.1.10876.101.1.151.1.3.1
An entry of fsMIRip2NBRTrustListTable.
Indexes
Column Syntax OID
fsMIRip2TrustNBRIpAddr
Ipaddress of the Router from which this router
can accept RIP Packets
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.3.1.1
fsMIRip2TrustNBRRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.151.1.3.1.2

fsMIRip2IfConfTable

table
.1.3.6.1.4.1.10876.101.1.151.1.4 · 1 row entry · 11 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRip2IfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRip2IfConfTable' 
A list of subnets which require separate
configuration in RIP.
fsMIRip2IfConfEntry row .1.3.6.1.4.1.10876.101.1.151.1.4.1
A Single Routing Domain in a single Subnet.
Indexes
Column Syntax OID
fsMIRip2IfConfAddress
The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.1
fsMIRip2IfAdminStat
The administrative status of RIP-2 in the
router. The value 'enabled' denotes that the
RIP2 Process is active throughout the system.
'disabled' disables RIP2 Process in the system.
'passive' denotes that the R…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3passive
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.2
fsMIRip2IfConfOperState
This gives the Operational Status of the Interface
Enumeration
Enumerated Values:
1operup
2operdown
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.3
fsMIRip2IfConfUpdateTmr
Interval Time Between Updates
Integer32r/w
Constraints:
range: 10-3600
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.4
fsMIRip2IfConfGarbgCollectTmr
Interval before deleting an entry after not hearing
it. Also the advertisements of this entry is set to
INFINITY while sending to others
Integer32r/w
Constraints:
range: 120-180
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.5
fsMIRip2IfConfRouteAgeTmr
Time after which the entry is put into garbage collect
interval
Integer32r/w
Constraints:
range: 30-500
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.6
fsMIRip2IfSplitHorizonStatus
A flag to denote the split horizon operational status
in the system. The value `splitHorizon` denotes that
splitHorizon should be applied in the response packets
that are going out
Enumerationr/w
Enumerated Values:
1splitHorizon
2splitHorizonWithPoisRev
3disable
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.7
fsMIRip2IfConfDefRtInstall
A flag that decides whether the default route received over this
interface should be installed to rip database or not.
Enumerationr/w
Enumerated Values:
1installDefRt
2doNotInstallDefRt
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.8
fsMIRip2IfConfSpacingTmr
Number of route entries are greater than 25 , regular updates
(response packets are sent for every fsMIRip2IfConfUpdateTmr
interval) are sent in multiple packets.
Spacing Provides the interval between the
packets.For…
Integer32r/w
Constraints:
range: 0-360
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.9
fsMIRip2IfConfInUseKey
This represents the active authentication KeyID that is currently used
in the particular interface for sending RIP updates.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.10
fsMIRip2IfConfAuthLastKeyStatus
A flag to indicate that the last key configured on a RIP interface
has expired or not.This object is updated during transmission and
reception of RIP updates.

TRUE - The last key on this particular int…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.10876.101.1.151.1.4.1.11

fsMIRipMd5AuthTable

table
.1.3.6.1.4.1.10876.101.1.151.1.5 · 1 row entry · 6 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRipMd5AuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRipMd5AuthTable' 
The MD5 Authentication table for RIP.
fsMIRipMd5AuthEntry row .1.3.6.1.4.1.10876.101.1.151.1.5.1
An entry in to the MD5 Authentiaction table. More than one
entry can be configured for an interface.
Indexes
Column Syntax OID
fsMIRipMd5AuthAddress
The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order. RIP should
have be…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.5.1.1
fsMIRipMd5AuthKeyId
The key ID for this key. This should be unique for the same
fsMIRipMd5AuthAddress. This enables the configuration of more than
one key for an interface.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.151.1.5.1.2
fsMIRipMd5AuthKey
The value to be used as the Authentication Key.
If a string shorter than 16 octets is supplied, it will be
left- justified and padded to 16 octets, on the right,
with nulls (0x00).
Reading this object always results in…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.151.1.5.1.3
fsMIRipMd5KeyStartTime
The time the router will start accepting or generating the
packets that have been created with this key.
The start time of the key should be less than the expiry time of
the previous key.
During the overlap interval, …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.5.1.4
fsMIRipMd5KeyExpiryTime
The time the router will stop accepting the packets that have
been created with this key. This time will be indicated (in the
number of seconds) from the start time of the key. If the expiry time
of a key is zero, …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.5.1.5
fsMIRipMd5KeyRowStatus
The status of this row by which a new entry can be created or
deleted by setting this object to the appropriate value as
mentioned in SMI-v2.If this entry is made active, then no other
entry in the table will be allow…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.151.1.5.1.6

fsMIRip2NBRUnicastListTable

table
.1.3.6.1.4.1.10876.101.1.151.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRip2NBRUnicastListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRip2NBRUnicastListTable' 
This table contains a list of Router addresses 
from which you can receive RIP Packets
fsMIRip2NBRUnicastListEntry row .1.3.6.1.4.1.10876.101.1.151.1.6.1
An entry of fsMIRip2NBRUnicastListTable.
Indexes
Column Syntax OID
fsMIRip2NBRUnicastIpAddr
Ipaddress of the neighbour Router to which unicast
update has to be sent
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.6.1.1
fsMIRip2NBRUnicastNBRRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.151.1.6.1.2

fsMIRip2LocalRouteTable

table
.1.3.6.1.4.1.10876.101.1.151.1.7 · 1 row entry · 11 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRip2LocalRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRip2LocalRouteTable' 
This table contain Local routing table entries
fsMIRip2LocalRouteEntry row .1.3.6.1.4.1.10876.101.1.151.1.7.1
A list of routes in local routing table
Indexes
Column Syntax OID
fsMIRip2DestNet
The IP Address of the destination network
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.1
fsMIRip2DestMask
The Destination mask for the destination network
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.2
fsMIRip2Tos
The value for Rip is always zero
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.3
fsMIRip2NextHop
The The nexthop address to which any datagrams
destined to the destination,to be
forwarded. (In some special cases)
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.4
fsMIRip2RtIfIndex
The interface through which the route is learnt
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.5
fsMIRip2RtType
The value for Rip is always zero
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.6
fsMIRip2Proto
The protocol id == RIP (8 - 1)here
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.7
fsMIRip2ChgTime
The time when the route is installed
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.8
fsMIRip2Metric
The reachability cost for the destination
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.9
fsMIRip2RowStatus
Row status for perticular route entry
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.10
fsMIRip2Gateway
The gateway address to which any datagrams
destined to the destination, to be forwarded
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.7.1.11

fsMIRipAggTable

table
.1.3.6.1.4.1.10876.101.1.151.1.8 · 1 row entry · 4 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRipAggTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRipAggTable' 
The (conceptual) table listing the router's
supernet routes.RIP advertises only supernet
routes on the speicified interface. And it
suppresses all routes which are subset of the supernet.
fsMIRipAggEntry row .1.3.6.1.4.1.10876.101.1.151.1.8.1
An entry (conceptual row) in the
fsMIRipAggTable representing supertnet route for
the domain.
Indexes
Column Syntax OID
fsMIRipIfIndex
The interface index over which the aggregation is configured.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.151.1.8.1.1
fsMIRipAggAddress
The aggregated address which when combined with the
corresponding value of fsMIRipAggAddressMask
identifies the supernet route for this domain.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.8.1.2
fsMIRipAggAddressMask
The aggregated address mask which when combined with
the corresponding value of fsMIRipAggAddress
identifies the supernet route for the domain.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.8.1.3
fsMIRipAggStatus
The status of this row , by which new entries may be
created or old entries deleted from this table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.151.1.8.1.4

fsMIRipCryptoAuthTable

table
.1.3.6.1.4.1.10876.101.1.151.1.9 · 1 row entry · 9 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRipCryptoAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRipCryptoAuthTable' 
The Crypto Authentication table for RIP.
fsMIRipCryptoAuthEntry row .1.3.6.1.4.1.10876.101.1.151.1.9.1
An entry in to the Crypto Authentication table. More than one
entry can be configured for an interface.
Indexes
Column Syntax OID
fsMIRipCryptoAuthIfIndex
The interface index value of the RIP interface.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.151.1.9.1.1
fsMIRipCryptoAuthAddress
Indicates the IP Address on the interface.
Currently this IP Address will be taken as dont-care
value since IP Address specific authentication key
configuration is not supported. Only interface
specific key configura…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10876.101.1.151.1.9.1.2
fsMIRipCryptoAuthKeyId
The key ID for this key. This configured KeyID will be
sent in the RIP update packet. This object enables the
configuration of more than one key for an interface.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.151.1.9.1.3
fsMIRipCryptoAuthKey
The value to be used as the Authentication Key.
If a string shorter than 16 octets is supplied, it will be
left- justified and padded to 16 octets, on the right,
with nulls (0x00).
Reading this object always results in…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.151.1.9.1.4
fsMIRipCryptoKeyStartAccept
The time the router will start accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 2136-02-06,06:28:15,
DateTime equivalent to max value of …
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.151.1.9.1.5
fsMIRipCryptoKeyStartGenerate
The time the router will start using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 2136-02-06,06:28:15,
DateTime equivalent to max value of UINT4.
For exampl…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.151.1.9.1.6
fsMIRipCryptoKeyStopGenerate
The time the router will stop using this key for packets
generation.If the value is not set, then it will be taken
as infinite and displayed as 2136-02-06,06:28:15,
DateTime equivalent to max value of UINT4.
For example…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.151.1.9.1.7
fsMIRipCryptoKeyStopAccept
The time the router will stop accepting packets that have
been created with this key.If the value is not set, then it
will be taken as infinite and displayed as 2136-02-06,06:28:15,
DateTime equivalent to max value of U…
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.10876.101.1.151.1.9.1.8
fsMIRipCryptoKeyStatus
Identifies the status of key configured on a RIP interface.
The value valid indicates that there is a valid keyID
configured on the interface. Before the Key is made
valid the Authentication Key must be configured.The…
Enumerationr/w
Enumerated Values:
1valid
2delete
 .1.3.6.1.4.1.10876.101.1.151.1.9.1.9

fsMIRipRRDGlobalTable

table
.1.3.6.1.4.1.10876.101.1.151.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRipRRDGlobalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRipRRDGlobalTable' 
This Table Contains the list of globals for a
Context.
fsMIRipRRDGlobalEntry row .1.3.6.1.4.1.10876.101.1.151.2.1.1
An entry of fsMIRip2GlobalTable.
Indexes
Column Syntax OID
fsMIRipRRDGlobalStatus
This MIB object enables / disables RIP to participate
in Route Redistribution. If set to enabled then RIP will start
advertising the routes learned by other protocols. If set to
disabled then RIP will stop redistributi…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.1.151.2.1.1.1
fsMIRipRRDSrcProtoMaskEnable
This object determines the protocols from which the routes
have to be imported to RIP
Bit 1, if set indicates the routes have to be imported from the
local interface.
Bit 2, if set indicates the routes have to be impo…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.151.2.1.1.2
fsMIRipRRDSrcProtoMaskDisable
This object determines the protocols from which the importing of
routes should be stopped to RIP
Bit 1, if set indicates the routes have to be imported from the
local interface.
Bit 2, if set indicates the routes have…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.151.2.1.1.3
fsMIRipRRDRouteTagType
The Tag Type MIB object describes whether Tags
will be automatically generated or will be manually
configured. If tags are manually configured , the
fsMIRipMIRRDRouteTag MIB has to be set with the Tag
value needed.
Enumerationr/w
Enumerated Values:
1manual
2automatic
 .1.3.6.1.4.1.10876.101.1.151.2.1.1.4
fsMIRipRRDRouteTag
The Route Tag in case the user configures a Manual option for
the tags .
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.1.151.2.1.1.5
fsMIRipRRDRouteDefMetric
The default metric to be used for the imported routes from RTM.
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.1.151.2.1.1.6
fsMIRipRRDRouteMapEnable
Name Identifies the specified route-map
in the list of route-maps. If this Object needs to be
changed, first reset this object and then configure the
new value.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.10876.101.1.151.2.1.1.7

fsMIRipDistInOutRouteMapTable

table
.1.3.6.1.4.1.10876.101.1.151.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRipDistInOutRouteMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRipDistInOutRouteMapTable' 
A table describing the configuration of filtering for route map.
fsMIRipDistInOutRouteMapEntry row .1.3.6.1.4.1.10876.101.1.151.3.1.1
Information describing the filtering configuration of single entry.
Indexes
Column Syntax OID
fsMIRipDistInOutRouteMapName
Route map name.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.10876.101.1.151.3.1.1.1
fsMIRipDistInOutRouteMapType
Type of route map to indicate the route map is for
distribute in or for distribute out or for distance.
1 - distance
2 - distribute in
3 - distribute out
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.10876.101.1.151.3.1.1.2
fsMIRipDistInOutRouteMapValue
Distance value ( this will be unused for distribute list )
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.10876.101.1.151.3.1.1.3
fsMIRipDistInOutRouteMapRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.10876.101.1.151.3.1.1.4

fsMIRipPreferenceTable

table
.1.3.6.1.4.1.10876.101.1.151.4.1 · 1 row entry · 1 columns
Open in standard view
Uses the supermicro variant from /opt/observium/mibs/supermicro.
Command help
Walk fsMIRipPreferenceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICRO-MIRIP2-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICRO-MIRIP2-MIB::fsMIRipPreferenceTable' 
A table describing preference value for RIP routes.
fsMIRipPreferenceEntry row .1.3.6.1.4.1.10876.101.1.151.4.1.1
Information describing preference value of single entry.
Indexes
Column Syntax OID
fsMIRipPreferenceValue
Preference value for RIP routes. Use '0' to set default value
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.1.151.4.1.1.1