fsMIRip2TrustNBRListEnable

SUPERMICRO-MIRIP2-MIB · .1.3.6.1.4.1.10876.101.1.151.1.1.1.4

MIB view Table view

Object

column r/w Enumeration

The status of neighbor list in the router.
The value 'enabled' denotes that a list of
router's IP address can be configured and 
RIP Packets from those router's will be processed 
by RIP and packets from other Routers will be dropped.
'Disabled' denotes that RIP Packet from all the
router's will be processed.

Context

MIB: SUPERMICRO-MIRIP2-MIB
OID: .1.3.6.1.4.1.10876.101.1.151.1.1.1.4
Type: column
Access: readwrite
Status: current
Parent: fsMIRip2GlobalEntry
Table: fsMIRip2GlobalTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	enabled
`2`	disabled

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsMIRipContextId Identifies the Rip Domain Context.	column	Integer32	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.1`
fsMIRip2OverSubscriptionTimeout Over subscription timeout value as mentioned in RFC 2091.When a Circuit DOWN message is received from the circuit manager, this timer will be started for the specified timeout va…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.10`
fsMIRip2Propagate Is propagation of static route is enabled or not. If it is enabled then routing protocols (like RIP) are allowed to include static routes in the update messages.	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.11`
fsMIRipTrcFlag Enables the tracing in the RIP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. …	column	Integer32	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.12`
fsMIRipRowStatus The row status variable, used according to row installation and removal conventions.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.13`
fsMIRipAdminStatus The administrative status of RIP in a particular router context. The value 'enabled' denotes that the RIP Process is active; 'disabled' disables it on all inter-faces.	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.14`
fsMIRip2LastAuthKeyLifetimeStatus A flag that decides whether the last authentication key on expiry, should take its lifetime to be infinite or not. If this object is set to true the last key on expiry resets its…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.15`
fsMIRipRtCount The number of routes in a particular context	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.16`
fsMIRip2Security A variable denotes the security level of RIP-2 in the system. The value `minimumSecurity` denotes that the RIP1 packets will be accepted even when authentication is in use. The va…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.2`
fsMIRip2Peers The maximum number of peers that can be in conversation with the RIP2 system simultaneously	column	Integer32	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.3`
fsMIRip2NumberOfDroppedPkts Number of RIP Packets dropped because of neighbor list check.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.5`
fsMIRip2SpacingEnable Whether spacing is enabled or not. If spacing is enabled, generation of periodic update packet will be split and send.	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.6`
fsMIRip2AutoSummaryStatus This object specify the auto-summary status.If enabled, summary routes are sent in regular updates for both rip v1 and v2.If split hoizon is enabled, summary is sent only if a…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.7`
fsMIRip2RetransTimeoutInt The timeout interval to be used to retransmit the Update request packet or an unacknowledged update response packet.	column	Integer32	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.8`
fsMIRip2MaxRetransmissions The maximum number of retransmissions of the update request and update response packets. If no response is received then the routes via the next hop router are marked unreachabl…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.151.1.1.1.9`