sysConfigHeuristics
STAND-ALONE-ETHERNET-SWITCH-MIB ·
.1.3.6.1.4.1.437.1.1.3.2.12
Object
A value which enables special heuristic functions.
The value is a sum. This sum initially takes the
value zero, Then, for each heuristic function, H,
in the range 1 through 32, that is enabled, 2 raised
to (H - 1) is added to the sum.
The heuristic functions are:
H Heuristic Function
--- ------------------
1 system reset when an invalid buffer is detected
2 system reset when free and transmit lists are mixed
3 system reset when the buffer counter overflows
4 system reset when the frame status overflows
5 system reset when queue head passes tail
6 system reset when the self-monitor loopback fails
7 system reset when the port status interface hangs
8 system reset when the LED interface hangs
9 system reset when the buffer interface hangs
10 system reset when the frame DRAM interface hangs
11 system reset when invalid hardware activities are detected
12 reserved (must be zero)
13 reserved (must be zero)
14 reserved (must be zero)
15 reserved (must be zero)
16 reserved (must be zero)
17 reserved (must be zero)
18 reserved (must be zero)
19 size of transmit queue is 1.5K.
20 reserved (must be zero)
21 reserved (must be zero)
22 reserved (must be zero)
23 unfreeze LEDs upon a POST failure
24 reserved (must be zero)
25 reserved (must be zero)
26 reserved (must be zero)
27 reserved (must be zero)
28 reserved (must be zero)
29 reserved (must be zero)
30 reserved (must be zero)
31 reserved (must be zero)
32 reserved (must be zero)
Context
- MIB
- STAND-ALONE-ETHERNET-SWITCH-MIB
- OID
.1.3.6.1.4.1.437.1.1.3.2.12- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- sysConfig
Net-SNMP examples
How SNMP and these commands workScalars have one instance, identified by the .0 suffix.
Read the scalar instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'STAND-ALONE-ETHERNET-SWITCH-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'STAND-ALONE-ETHERNET-SWITCH-MIB::sysConfigHeuristics.0'
More examples
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'STAND-ALONE-ETHERNET-SWITCH-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'STAND-ALONE-ETHERNET-SWITCH-MIB::sysConfigHeuristics'
Syntax
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647