timingSinkEthPortRole
SIAE-SYNC-MIB ·
.1.3.6.1.4.1.3373.1103.28.4.1.16
Object
column
deprecated
r/w
Enumeration
This item configures how to handle the role of a 1000BASE-T port when it is used as a source of timing: choosing 'static', the role is set according ethLanPhyTable settings, choosing 'dynamic', the role is set consistently with the timing direction over the 1000baseT link chosen by SSM protocol.
Context
- MIB
- SIAE-SYNC-MIB
- OID
.1.3.6.1.4.1.3373.1103.28.4.1.16- Type
- column
- Access
- readwrite
- Status
- deprecated
- Parent
- timingSinkRecord
- Table
- timingSinkTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | static |
2 | dynamic |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| timingSinkGenId This object is used as Index of the timingGeneratorTable and
defines in union with timingSinkType and timingSinkId the
reference signal. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.28.4.1.1 |
| timingSinkActiveStatus Active status (Probable cause = xxx) status for the reference signal. | column | Enumeration | .1.3.6.1.4.1.3373.1103.28.4.1.10 |
| timingSinkCurrentQuality Current quality on sink instance. | column | Enumeration | .1.3.6.1.4.1.3373.1103.28.4.1.11 |
| timingSinkOverwriteTxQuality Forcing of Tx quality parameter. | column | Enumeration | .1.3.6.1.4.1.3373.1103.28.4.1.12 |
| timingSinkOverwriteRxQuality Forcing of Rx quality parameter. | column | Enumeration | .1.3.6.1.4.1.3373.1103.28.4.1.13 |
| timingSinkSentQuality Quality level written in the S1 byte of the outgoing STM-n. | column | Enumeration | .1.3.6.1.4.1.3373.1103.28.4.1.14 |
| timingSinkE1Sabit Specifies the San synchronization status bit used
to indicate the clock quality level.
Meaningful when the Sink source is an E1 | column | Integer32 | .1.3.6.1.4.1.3373.1103.28.4.1.15 |
| timingSinkRowStatus Status of this row of timingSinkTable | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3373.1103.28.4.1.17 |
| timingSinkId This object is used as Index of the timingSinkTable and
defines in union with timingSinkType and timingSinkGenId the
reference signal. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.28.4.1.2 |
| timingSinkType This object is used as Index of the timingSinkTable and defines
if the reference signal is used to generate T0 or T4 system clock. | column | Enumeration | .1.3.6.1.4.1.3373.1103.28.4.1.3 |
| timingSinkIfIndex The ifIndex value the agent selected for this
timingSink interface. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.3373.1103.28.4.1.4 |
| timingSinkSelector This object is used to select one of the possible clock source
connected to this timingSink. Valid values are listed in
timingSinkSelectorTable: only values of timingSinkSelectorI… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.28.4.1.5 |
| timingSinkPriority This object is used to set the priority of the reference signal (p1 is
the highest priority). | column | Enumeration | .1.3.6.1.4.1.3373.1103.28.4.1.6 |
| timingSinkLabel ASCII string used to describe the reference signal when a trap is sent. | column | OctetString | .1.3.6.1.4.1.3373.1103.28.4.1.7 |
| timingSinkLosAlarm Loss of reference signal (Probable cause = xxx) alarm
with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.28.4.1.8 |
| timingSinkDriftAlarm Drift of reference signal (Probable cause = xxx) alarm
with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.28.4.1.9 |