SIAE-SYNC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
50

timingGeneratorTable

table
.1.3.6.1.4.1.3373.1103.28.2 · 1 row entry · 17 columns
Open in standard view
Uses the siaemic variant from /opt/observium/mibs/siaemic.
Command help
Walk timingGeneratorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SIAE-SYNC-MIB' -M '/opt/observium/mibs/siaemic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SIAE-SYNC-MIB::timingGeneratorTable' 
Table with TimingGenerator records.
timingGeneratorRecord row .1.3.6.1.4.1.3373.1103.28.2.1
TimingGenerator record.
Indexes
Column Syntax OID
timingGeneratorId
This object is used as Index of the Timing Generator Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.28.2.1.1
timingGeneratorT4vsT0
This object is used to set or reset the condition T4 equal T0.
Enumerationr/w
Enumerated Values:
1t4NotEqualT0
2t4EqualT0
 .1.3.6.1.4.1.3373.1103.28.2.1.2
timingGeneratorHoldOffTime
HoldOff time in milliseconds (300..1800).
Integer32r/w
Constraints:
range: 300-1800
 .1.3.6.1.4.1.3373.1103.28.2.1.3
timingGeneratorWtrTime
Wait Time to Restore in minutes (0..12).
Integer32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.3373.1103.28.2.1.4
timingGeneratorSinkLosSet
Wait time (seconds) before to set Los of reference signal.
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.3373.1103.28.2.1.5
timingGeneratorSinkLosReset
Wait time (seconds) before to reset Los of reference signal.
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.3373.1103.28.2.1.6
timingGeneratorT0SquelchAlarm
T0 squelch Alarm (Probable cause = xxx) with associated severity.
SIAE-ALARM-MIBAlarmStatus
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.28.2.1.7
timingGeneratorT4SquelchAlarm
T4 squelch Alarm (Probable cause = xxx) with associated severity.
SIAE-ALARM-MIBAlarmStatus
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.28.2.1.8
timingGeneratorFreeRunningStatus
Free running status (Probable cause = xxx) with associated severity.
SIAE-ALARM-MIBAlarmStatus
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.28.2.1.9
timingGeneratorHoldoverStatus
Holdover status (Probable cause = xxx) with associated severity.
SIAE-ALARM-MIBAlarmStatus
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.28.2.1.10
timingGeneratorActiveStatus
Active status (Probable cause = xxx) with associated severity.
Enumeration
Enumerated Values:
1cleared
2activeReportableStatus
 .1.3.6.1.4.1.3373.1103.28.2.1.11
timingGeneratorT0CurrentQuality
Current quality on T0.
Enumeration
Enumerated Values:
0qUNKN
2qPRC
4qSSUT
8qSSUL
11qSEC
15qDNU
 .1.3.6.1.4.1.3373.1103.28.2.1.12
timingGeneratorT4CurrentQuality
Current quality on T4.
Enumeration
Enumerated Values:
0qUNKN
2qPRC
4qSSUT
8qSSUL
11qSEC
15qDNU
 .1.3.6.1.4.1.3373.1103.28.2.1.13
timingGeneratorT4MinimumQuality
If the Quality Level of the signal used to derive T4 falls below
timingGeneratorT4MinimumQuality then the output will be squelched.
The value ql-DNU inhibits T4 squelch due to this minimum Quality
Level. This feature is…
Enumerationr/w
Enumerated Values:
2qPRC
4qSSUT
8qSSUL
11qSEC
 .1.3.6.1.4.1.3373.1103.28.2.1.14
timingGeneratorT0PreferredSource
Object identifier of the leaf timingSinkGenId of the timingSink
instance selected as preferential clock source of T0.
If no preferential timing sink is selected,
the value should be set to the OBJECT IDENTIFIER { 0 0 }.
ObjectIdentifierr/w .1.3.6.1.4.1.3373.1103.28.2.1.15
timingGeneratorT4PreferredSource
Object identifier of the leaf timingSinkGenId of the timingSink
instance selected as preferential clock source of T4.
If no preferential timing sink is selected,
the value should be set to the OBJECT IDENTIFIER { 0 0 }.
ObjectIdentifierr/w .1.3.6.1.4.1.3373.1103.28.2.1.16
timingGeneratorRowStatus
Status of this row of timingGeneratorTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3373.1103.28.2.1.17

timingGeneratorMaintTable

table
.1.3.6.1.4.1.3373.1103.28.3 · 1 row entry · 5 columns
Open in standard view
Uses the siaemic variant from /opt/observium/mibs/siaemic.
Command help
Walk timingGeneratorMaintTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SIAE-SYNC-MIB' -M '/opt/observium/mibs/siaemic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SIAE-SYNC-MIB::timingGeneratorMaintTable' 
Table with TimingGenerator records.
timingGeneratorMaintRecord row .1.3.6.1.4.1.3373.1103.28.3.1
TimingGenerator record.
Indexes
Column Syntax OID
timingGeneratorT4Squelch
This object is used to enable/disable T4 squelch.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.28.3.1.1
timingGeneratorStatusControl
Clock generator operating mode control.
This item is linked to a manual operation (ManOpRecord) instance.
Enumerationr/w
Enumerated Values:
1freerunning
2holdover
3locked
 .1.3.6.1.4.1.3373.1103.28.3.1.2
timingGeneratorT0ForcedSource
Object identifier of the leaf timingSinkGenId of the timingSink
instance selected as forced clock source of T0.
If no forced timing sink is selected,
the value should be set to the OBJECT IDENTIFIER { 0 0 }.
ObjectIdentifierr/w .1.3.6.1.4.1.3373.1103.28.3.1.3
timingGeneratorT4ForcedSource
Object identifier of the leaf timingSinkGenId of the timingSink
instance selected as forced clock source of T4.
If no forced timing sink is selected,
the value should be set to the OBJECT IDENTIFIER { 0 0 }.
ObjectIdentifierr/w .1.3.6.1.4.1.3373.1103.28.3.1.4
timingGeneratorWtrClearSource
Object identifier of the leaf timingSinkGenId of the timingSink
instance selected to clear WTR time. On read, this object return
alvays an OBJECT IDENTIFIER {0 0}.
ObjectIdentifierr/w .1.3.6.1.4.1.3373.1103.28.3.1.5

timingSinkTable

table
.1.3.6.1.4.1.3373.1103.28.4 · 1 row entry · 17 columns
Open in standard view
Uses the siaemic variant from /opt/observium/mibs/siaemic.
Command help
Walk timingSinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SIAE-SYNC-MIB' -M '/opt/observium/mibs/siaemic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SIAE-SYNC-MIB::timingSinkTable' 
Table with TimingSink records.
timingSinkRecord row .1.3.6.1.4.1.3373.1103.28.4.1
TimingSink record.
Indexes
Column Syntax OID
timingSinkGenId
This object is used as Index of the timingGeneratorTable and
defines in union with timingSinkType and timingSinkId the
reference signal.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.28.4.1.1
timingSinkId
This object is used as Index of the timingSinkTable and
defines in union with timingSinkType and timingSinkGenId the
reference signal.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.28.4.1.2
timingSinkType
This object is used as Index of the timingSinkTable and defines
if the reference signal is used to generate T0 or T4 system clock.
Enumeration
Enumerated Values:
1t0
2t4
 .1.3.6.1.4.1.3373.1103.28.4.1.3
timingSinkIfIndex
The ifIndex value the agent selected for this
timingSink interface.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.3373.1103.28.4.1.4
timingSinkSelector
This object is used to select one of the possible clock source
connected to this timingSink. Valid values are listed in
timingSinkSelectorTable: only values of timingSinkSelectorId
related to this instance of timinkSink…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.28.4.1.5
timingSinkPriority
This object is used to set the priority of the reference signal (p1 is
the highest priority).
Enumerationr/w
Enumerated Values:
1p1
2p2
3p3
4p4
5p5
6p6
7p7
8p8
9p9
10p10
11p11
12p12
13p13
14p14
15p15
16disable
 .1.3.6.1.4.1.3373.1103.28.4.1.6
timingSinkLabel
ASCII string used to describe the reference signal when a trap is sent.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.3373.1103.28.4.1.7
timingSinkLosAlarm
Loss of reference signal (Probable cause = xxx) alarm
with associated severity.
SIAE-ALARM-MIBAlarmStatus
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.28.4.1.8
timingSinkDriftAlarm
Drift of reference signal (Probable cause = xxx) alarm
with associated severity.
SIAE-ALARM-MIBAlarmStatus
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.28.4.1.9
timingSinkActiveStatus
Active status (Probable cause = xxx) status for the reference signal.
Enumeration
Enumerated Values:
1cleared
2activeReportableStatus
 .1.3.6.1.4.1.3373.1103.28.4.1.10
timingSinkCurrentQuality
Current quality on sink instance.
Enumeration
Enumerated Values:
0qUNKN
2qPRC
4qSSUT
8qSSUL
11qSEC
15qDNU
 .1.3.6.1.4.1.3373.1103.28.4.1.11
timingSinkOverwriteTxQuality
Forcing of Tx quality parameter.
Enumerationr/w
Enumerated Values:
0noOverwrite
2qPRC
4qSSUT
8qSSUL
11qSEC
15qDNU
 .1.3.6.1.4.1.3373.1103.28.4.1.12
timingSinkOverwriteRxQuality
Forcing of Rx quality parameter.
Enumerationr/w
Enumerated Values:
0noOverwrite
2qPRC
4qSSUT
8qSSUL
11qSEC
15qDNU
 .1.3.6.1.4.1.3373.1103.28.4.1.13
timingSinkSentQuality
Quality level written in the S1 byte of the outgoing STM-n.
Enumeration
Enumerated Values:
0qUNKN
2qPRC
4qSSUT
8qSSUL
11qSEC
15qDNU
 .1.3.6.1.4.1.3373.1103.28.4.1.14
timingSinkE1Sabit
Specifies the San synchronization status bit used
to indicate the clock quality level.
Meaningful when the Sink source is an E1
Integer32r/w
Constraints:
range: 4-8
 .1.3.6.1.4.1.3373.1103.28.4.1.15
timingSinkEthPortRoledeprecated
This item configures how to handle the role of a 1000BASE-T port
when it is used as a source of timing: choosing 'static', the
role is set according ethLanPhyTable settings, choosing 'dynamic',
the role is set consisten…
Enumerationr/w
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.3373.1103.28.4.1.16
timingSinkRowStatus
Status of this row of timingSinkTable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3373.1103.28.4.1.17

timingSinkSelectorTable

table
.1.3.6.1.4.1.3373.1103.28.16 · 1 row entry · 2 columns
Open in standard view
Uses the siaemic variant from /opt/observium/mibs/siaemic.
Command help
Walk timingSinkSelectorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SIAE-SYNC-MIB' -M '/opt/observium/mibs/siaemic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SIAE-SYNC-MIB::timingSinkSelectorTable' 
Table with TimingSinkSelector records.
timingSinkSelectorRecord row .1.3.6.1.4.1.3373.1103.28.16.1
TimingSinkSelector entry.
Several instances of this entry can be create for each instance of
timingSinkTable. Each entry represents a possible source selected
by a multiplexer outside the SETS for a specific timingSink.…
Indexes
Column Syntax OID
timingSinkSelectorId
This object is used as Index of the timingSinkSelectorTable and
defines in union with timingSinkGenId, timingSinkType and
timingSinkId the selected source by a multiplexer outside the
SETS.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.28.16.1.1
timingSinkSelectorLabel
ASCII string used to describe the selectable timing source.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.3373.1103.28.16.1.2

esmcTable

table
.1.3.6.1.4.1.3373.1103.28.17 · 1 row entry · 9 columns
Open in standard view
Uses the siaemic variant from /opt/observium/mibs/siaemic.
Command help
Walk esmcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SIAE-SYNC-MIB' -M '/opt/observium/mibs/siaemic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SIAE-SYNC-MIB::esmcTable' 
Table with TimingSinkSelector records.
esmcRecord row .1.3.6.1.4.1.3373.1103.28.17.1
esmcTable entry.
Every entries describes an ESMC channel of a TE interface.
Indexes
Column Syntax OID
esmcSsmEnable
This object enables SSM messaging on this ifIndex.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.28.17.1.1
esmcQlRx
This object show quality received on ESMC-PDU this interface.
Enumeration
Enumerated Values:
0qUNKN
2qPRC
4qSSUT
8qSSUL
11qSEC
15qDNU
 .1.3.6.1.4.1.3373.1103.28.17.1.2
esmcQlTx
This object show quality transmitted in ESMC-PDU on this interface.
Enumeration
Enumerated Values:
0qUNKN
2qPRC
4qSSUT
8qSSUL
11qSEC
15qDNU
 .1.3.6.1.4.1.3373.1103.28.17.1.3
esmcPktsRx
This object contains the total number of received ESMC-PDU packets
on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3373.1103.28.17.1.4
esmcPktsTx
This object contains the total number of transmitted ESMC-PDU
packets on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3373.1103.28.17.1.5
esmcPktsRxDropped
This object contains the total number of dropped ESMC-PDU packets
on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3373.1103.28.17.1.6
esmcPktsRxErrored
This object contains the total number of dropped ESMC-PDU packets
whose processing(decoding) resulted into error.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3373.1103.28.17.1.7
esmc1000BaseTRole
This object allows to input the clock generator role of a 1000BaseT
interface. This objects is applicable when the quality management
is disabled (timingGeneratorQualityEnable set to off(1)) and to
all interfaces not c…
Enumerationr/w
Enumerated Values:
1slave
2master
3auto
 .1.3.6.1.4.1.3373.1103.28.17.1.8
esmcRowStatus
Status of this row of esmcTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3373.1103.28.17.1.9