equipManagerWakeUpAlarmSeverityCode
SIAE-EQUIP-MIB ·
.1.3.6.1.4.1.3373.1103.1.23
Object
Defines the severity associated to the equipManagerWakeUpAlarm and enables/disables the trap generation on status change event.
Context
- MIB
- SIAE-EQUIP-MIB
- OID
.1.3.6.1.4.1.3373.1103.1.23- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- equipment
- Siblings
- 40
Syntax
SIAE-ALARM-MIBAlarmSeverityCode
- Source
- SIAE-ALARM-MIBAlarmSeverityCode
- Base type
Enumeration
Values & Constraints
Type Values
1 | disable |
2 | statusTrapEnable |
3 | warningTrapEnable |
4 | minorTrapEnable |
5 | majorTrapEnable |
6 | criticalTrapEnable |
18 | statusTrapDisable |
19 | warningTrapDisable |
20 | minorTrapDisable |
21 | majorTrapDisable |
22 | criticalTrapDisable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| equipMibVersion Numerical version of this module.
The string version of this MIB have the following format:
XX.YY.ZZ
so, for example, the value 1 should be interpreted as 00.00.01
and the valu… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.1.1 |
| equipStationID ASCII string assigned by the operator to identify the specific equipment. | scalar | OctetString | .1.3.6.1.4.1.3373.1103.1.10 |
| equipLOMConfigEnable Enables/disables the capabilityto connect a LOM in Configuration Mode. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.11 |
| equipLOMConnected Signal when the LOM is connected to the NE and if the connection
is for monitor or configuration. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.12 |
| equipLOMConnectedTrapEnable Enables/disables the trap generation on EquipLOMConnected status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.13 |
| equipConfigChange Set by the NE when the equipment configuration is changed by the local
or Remote LOM.
The octet string is a bit stream of flags; a set bit is a change on a
specific item. We had:
… | scalar | OctetString | .1.3.6.1.4.1.3373.1103.1.14 |
| equipConfigChangeTrapEnable Enables/disables the trap generation on EquipConfigChange status
change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.15 |
| equipRequest Force Equipment Controller restart or change in interface properties. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.16 |
| equipIpEthAddress Ip address of the equipment on Ethernet interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.1103.1.17 |
| equipIpEthNetMask The subnet Mask associated with the IP address of ethernet interface.
The value of the Mask is an IP address with all the network bits set to 1
and all the hosts bits set to 0. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.1103.1.18 |
| equipOsiamParameter It defines the set-up parameter for OSI stack. | scalar | OctetString | .1.3.6.1.4.1.3373.1103.1.19 |
| equipCurrentTime Seconds since 1/1/1970. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.3373.1103.1.2 |
| equipIpSnmpAgentAddress Ip address used by SNMP Agent for mark generated TRAP. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.1103.1.20 |
| equipOperationInProgress A value different from 0 means operation in progress. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.1.21 |
| equipManagerWakeUpAlarm This alarm switches on when periodic connection wake-up trap starts.
The trap related to this alarm is also sent periodically only to the
manager specified by the leaf equipManage… | scalar | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.1.22 |
| equipManagerWakeUpTimeout This object defines the time (in minutes) after which the periodic
connection wake-up trap is stopped.
The maximium value is equivalent to 24 hours.
When the timeout elapses the e… | scalar | Integer32 | .1.3.6.1.4.1.3373.1103.1.24 |
| equipManagerWakeUpIpAddr Ip Address of manager wich to send a periodic connection wake-up trap.
The periodic trap is sent only if the equipManagerWakeUpAlarmSeverityCode
differs from disable.
If Ip Addres… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.1103.1.25 |
| equipManagerWakeUpGosipAddress Gosip Address of manager wich to send a periodic connection wake-up trap. | scalar | OctetString | .1.3.6.1.4.1.3373.1103.1.26 |
| equipManagerWakeUpTrapVersion Trap version supported by Manager to wake-up. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.27 |
| equipManager1IpAddr First IP address of a SNMP Manager always logged to this equipment.
The address 0.0.0.0 mean that manager is not present. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.1103.1.28 |
| equipManager2IpAddr Second IP address of a SNMP Manager always logged to this equipment.
The address 0.0.0.0 mean that manager is not present. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.1103.1.29 |
| equipUpTime The time since the system was last re-initialized (in seconds
since 1/1/1970). | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.3373.1103.1.3 |
| equipManager1TrapVersion Trap version supported by Manager 1 (related to equipManager1IpAddr). | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.30 |
| equipManager2TrapVersion Trap version supported by Manager 2 (related to equipManager2IpAddr). | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.31 |
| equipDailyPmTimeZone Reference GMT Time Zone to close the daily P.M. records. | scalar | Integer32 | .1.3.6.1.4.1.3373.1103.1.32 |
| equipOperationMngtControl startOperation means the apply of the 'management parameters
set' on the E6165 switch.
confirmOperation means the backup of the 'management
parameters set'. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.33 |
| equipOperationMngtInProgress A value different from 0 means Mngt operation in progress. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.1.34 |
| equipLocation ASCII string assigned by the operator to identify the location of
specific equipment. | scalar | OctetString | .1.3.6.1.4.1.3373.1103.1.35 |
| equipLongitude Geographic coordinate that specifies the east-west position of
the equipment.
In order to calculate the latitude in degrees the formula to be
applied is
Longitude = equipLongit… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.1.36 |
| equipLatitude Geographic coordinate that specifies the north-south position of
the equipment.
In order to calculate the latitude in degrees the formula to be
applied is
Latitude = equipLatit… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.1.37 |
| equipIpEthVlanId Ethernet vlan id on top of which management is built | scalar | Integer32 | .1.3.6.1.4.1.3373.1103.1.38 |
| equipIpEthDefGateway Ip address of the default gateway on Ethernet interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.1103.1.39 |
| equipType Type of SIAE MICROELETTRONICA's equipment | scalar | SNMPv2-TCAutonomousType | .1.3.6.1.4.1.3373.1103.1.4 |
| equipIpEthDefGatewayIfIndex Ip address of the default gateway on Ethernet interface. | scalar | Integer32 | .1.3.6.1.4.1.3373.1103.1.40 |
| equipMngtTable This is the table that describes the DCN parameters.
Two records are created,
the first one represents the operational status,
the other one represents the administrative status t… | table | - | .1.3.6.1.4.1.3373.1103.1.41 |
| equipLastRestartType Report the last restart-type performed in the system. | scalar | OctetString | .1.3.6.1.4.1.3373.1103.1.42 |
| equipIpEthOsiAddress Ip address of the equipment on Ethernet-OSI interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.1103.1.6 |
| equipGosipAddress GOSIP address of the equipment. | scalar | OctetString | .1.3.6.1.4.1.3373.1103.1.7 |
| equipIpEthOsiNetMask The subnet Mask associated with the IP address of OSI ethernet interface.
The value of the Mask is an IP address with all the network bits set to 1
and all the hosts bits set to 0. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.3373.1103.1.8 |
| equipL1L2IsIsRouting It defines the IS-IS routing type: L1 within the same area, L2 among
different areas. | scalar | Enumeration | .1.3.6.1.4.1.3373.1103.1.9 |