SIAE-EQUIP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
8
equipMngtTable
table.1.3.6.1.4.1.3373.1103.1.41
·
1 row entry
·
8 columns
Uses the siaemic variant from
Command help
/opt/observium/mibs/siaemic.
Walk equipMngtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SIAE-EQUIP-MIB' -M '/opt/observium/mibs/siaemic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SIAE-EQUIP-MIB::equipMngtTable'
This is the table that describes the DCN parameters.
Two records are created,
the first one represents the operational status,
the other one represents the administrative status that is applied after reload.
The operational record is loaded at the start up and it can not be modified,
so the related fields are read only.
While the administrative record can be updated.
As a restriction, interface type must be configured before the interface identifier.
This is to avoid any discrepancy due to the differencies in valid ranges for each interface type.
The DCN parameters.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The index to select one of two records of table:
the operational record and the administrative record. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3373.1103.1.41.1.1 |
||||||
|
The IP address of the equipment.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3373.1103.1.41.1.2 |
||||||
|
The network mask associated with the IP address.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3373.1103.1.41.1.3 |
||||||
|
The IP address of the default gateway.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3373.1103.1.41.1.4 |
||||||
|
The interface selected to reach the default gateway.
The special value 1 means that the snmp agent selects the interface whose IP address belongs to the defaul gateway subnet. |
Integer32r/w Constraints: range: 1-999 |
.1.3.6.1.4.1.3373.1103.1.41.1.5 |
||||||
|
The type of management interface:
- value 1 for physical lan interface, - value 2 for virtual loopback interface, - value 3 for management over vlan interface. This object must be configured before the in… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3373.1103.1.41.1.6 |
||||||
|
The identifier of management interface:
- if equipMngtIfType is ethernet: equipMngtIfId is the ifIndex of interface; - if equipMngtIfType is loopback: equipMngtIfId is in the interface name (es: loopback1) - if equipMng… |
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.3373.1103.1.41.1.7 |
||||||
|
The ifIndex corresponding to the port registered to vlan ID;
it is valid only when equipMngtIfType is vlan, whose value is in equipMngtIfId. This object can be modified only in specific equipment and spec… |
IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.3373.1103.1.41.1.8 |