hmtsRevReturnLvl

This is the return level as recorded on the last response
received on this receiver.  This value only applies to the RF
port types; all other port types should return noSuchName Error.
If the port has not received a response and therefore has not
recorded a reverse return level then this objects shall return
-999.  When the return level falls outside acceptable limits, as
indicated by the properties of this value, the offending units
hmtsDevComStat shall indicate a bad return level.  This value
is a placeholder to globally affect the properties that really
apply to the return level value in the hmtsDevTable.  In all cases
the HMTS shall set hmtsDevReturnLvl for the device to this as
received level upon receiving a valid massage.  The property
thresholds and enable when set using this object shall be used for
all hmtsDevReturnLvl in the device table using this receiver.
This object never reports an alarm, hmtsDevReturnLvl does when the
thresholds of this object are tripped.  Use hmtsDevReturnLvl
threshold properties to affect a property change for an individual
device.
This object has a threshold property in the propertyTable as defined
in SCTE 38-1 (formerly HMS026)

MIB

SCTE-HMS-HMTS-MIB

OID

.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.10

Type

column

Access

readonly

Status

current

Units

0.1 dBmV

Parent

hmtsRevPortEntry

Groups

1