SCTE-HMS-HMTS-MIB Table View

This table contains entries to control multicast groups for
alarm collection.  This table allows for multiple groups of
alarms to be collected.  It is expected that a higher level
manager will add entries to this table and the transponders
multicast address table.  When trap contention modes are used
polling will be disable while an active entry in this table has
contention enabled.  This way the polling does not interfere with
the possible asynchronous notifications.  As default this table
shall have one entry, containing the broadcast address.  This is
a non-volatile table.

hmtsTrapControlEntry row .1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1

A list of information about the Trap Control Entry.

Indexes

hmtsTControlId

Column	Syntax	OID
hmtsTControlId This value uniquely identifies this entry. DEFAULT: vendor specific. This object is non-volatile.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.1
hmtsTControlInterval This is the time between the beginnings of two consecutive alarm discovery periods. If the record is chained this is the interval between start of this entry and the start of the next entry with the same chain Id. DEFA…	1 sInteger32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.2
hmtsTControlChainId This identifies which Trap control records are to be run consecutively. The value of zero indices that the entry is independent from all other entries in this table. Likewise and entry with the chain id of 1 is indepe…	Integer32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.3
hmtsTControlMinDuration This is the minimum time for the alarm/trap discovery duration period for this entry. Attempt to set minimum duration greater than the maximum duration will result in a bad value error being returned. DEFAULT: vendor sp…	1 sInteger32r/w Constraints: range: 1-86400	.1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.4
hmtsTControlMaxDuration This is the maximum time for the alarm//trap discovery duration period for this entry. This is provided to allow a varying window size when a large number of TALKRQST PDUs are received during the alarm discovery period…	1 sInteger32r/w Constraints: range: 1-86400	.1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.5
hmtsTControlContinuity This indicates the manner that the HMTS uses to handle processing of the TALKRQST PDU for alarm discovery. immediate - means that the HMTS immediately terminates the contention period and request the SNMP …	Enumerationr/w Enumerated Values: 1 immediate 2 queued 3 continuous	.1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.6
hmtsTControlMulticastAddr This multicast address is used by the HMTS to address transponders that are to enable their contention when the row containing this object is processed. This address must already have been defined in hmtsMulticastAddrT…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.7
hmtsTControlRowStatus This is used to add and delete rows from this table dynamically.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5591.1.11.3.2.1.2.3.1.1.8

The forward port table contains information about the forward
transmitter ports of the HMTS.  The ports may be of several
varieties.  The majority of the control fields apply to the RF
serial port types, which support the HMS physical and MAC
layers.

hmtsFwdPortEntry row .1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1

A list of information about each forward path port

Indexes

hmtsFwdPortId

Column	Syntax	OID
hmtsFwdPortId This is a unique string identifying the forward port. This value is vendor specific and should physically identify the port.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.1
hmtsFwdPortDescr This is a string of text describing the function of the port and physical location. Such as 'HMS RF transmitter - Slot 1'. This value is vendor specific.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.2
hmtsFwdPortType Serial communication type: rf - This HMTS port uses an RF modem for forward communication. rs485 - This HMTS port uses an RS-485 for forward communication. rs232 - This HMTS port uses an RS-232 for forward communicat…	Enumeration Enumerated Values: 1 rf 2 rs485 3 rs232 4 other	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.3
hmtsFwdPortAdminState This allows the operator to disable/enable the processing of data sent on this port. When disabled no forward path messages shall be sent out this port. If the termination system does not support setting a specific va…	Enumerationr/w Enumerated Values: 1 enable 2 disableCarrierOn 3 disableCarrierOff	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.4
hmtsFwdPortOperState This reports the operational status of the port. This object has a threshold property in the discretePropertyTable as defined in SCTE 38-1 (formerly HMS026)	Enumeration Enumerated Values: 1 noError 2 noFreqAssgn 3 freqUnlocked 4 portComFailure 5 otherError	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.5
hmtsFwdHmtsFrequency This is the frequency at which an HMTS transmits its FSK signal on the HFC network, and only applies to RF ports. Other port types should return noSuchName upon SNMP get or set commands. When changing fro…	1 HzSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.6
hmtsFwdXpndrFrequency This is the frequency being sent in the payload of the CHNLDESC PDU. This variable only applies to RF ports, other port types should return noSuchName. When this variable is changed, several successive CHNLDESC PDU's sh…	1 HzSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.7
hmtsFwdProvPwrLvl This is the power level of the forward port transmitter modem. This value only applies to the RF port type; all other port types should return noSuchName. Any attempt to write to this value for a non RF port Type will …	0.1 dBmVSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.8
hmtsFwdMaxPwrLvl This is the maximum power level of the forward port transmitter modem. This value only applies to the RF port type; all other port types should return noSuchName. Any attempt to write to this value for a non RF port Ty…	0.1 dBmVSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.9
hmtsFwdPollTime The HMTS is required to poll the devices on the network. This is the maximum amount of time the HMTS will allow to pass before automatically attempting communication to see if the device is still responding. This is i…	1 sSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.5.1.10

The Reverse Port table contains information about the receiver
ports of the HMTS.  The reverse path may be Serial RF,
RS-485 or another serial interface.  The serial RF port is
usually a reverse path RF modem.  A unique identifier,
hmtsRevPortId, indexes this table.

hmtsRevPortEntry row .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1

A list of information about each reverse path port.

Indexes

hmtsRevPortId

Column	Syntax	OID
hmtsRevPortId This is a unique string identifying the reverse path port. This value is vendor specific and should physically identify the port.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.1
hmtsRevFwdPortId This is the unique identifier of the forward port table. This ties this reverse port to the commanding forward port. This shall be a valid index in the hmtsFwdPortTable. Setting this object to a value not in the hmtsFw…	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.2
hmtsRevPortDescr This is a string of text describing the function of the port and physical location. Such as 'HMS RF Receiver - Slot 3'. This value is vendor specific.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.3
hmtsRevPortType Serial communication type: rf - This HMTS port uses an RF modem for reverse communication. rs485 - This HMTS port uses an RS-485 for reverse communication. rs232 - This HMTS port uses an RS-232 for reverse communicat…	Enumeration Enumerated Values: 1 rf 2 rs485 3 rs232 4 other	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.4
hmtsRevPortAdminState This allows the operator to disable/enable the processing of data received on this port. When disabled no reverse path messages shall be received from this port. This object is non-volatile.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.5
hmtsRevPortOperState This reports the operational status of the port. This object has a threshold property in the discreteProperty as describe in SCTE 38-1 (formerly HMS026).	Enumeration Enumerated Values: 1 noError 2 noFreqAssgn 3 freqUnlocked 4 portComFailure 5 otherError	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.6
hmtsRevFrequency This is the return path frequency of both the HMTS' reverse path modem and the network element's reverse path transmitter. This value only applies to the RF port type; all other port types should return noSuchName. Thi…	1 HzSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.7
hmtsRevMuteLvl This level controls the automatic receiver Mute. Power below this level will not be converted into a digital data. This field only applies to the RF port type; all others port types should report Zero. Attempts to se…	0.1 dBmVSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.8
hmtsRevMulticastAddr This is the Multicast address associated with all devices on this receiver. When a device first registers with HMTS, this value is set as one of the devices multicast addresses. This must be a valid entry in the hmtsM…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.9
hmtsRevReturnLvl This is the return level as recorded on the last response received on this receiver. This value only applies to the RF port types; all other port types should return noSuchName Error. If the port has not received a res…	0.1 dBmVSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.10
hmtsRevCRCErrors This object maintains the number of packets received that have a bit error and do not pass CRC check. This count is maintained until the HMTS is reset or this count is reset. Writing to this object will reset the CRC …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.11
hmtsRevFrameErrors This object maintains the number of packets received that have a framing error. This count is maintained until the HMTS is reset or this count is reset. Writing to this object will reset the frame error count to Zero.…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.12
hmtsRevBackOffPeriod This is the backoff period as described in the commonBackoffPeriod object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used by the HMTS to preset and maintain the value of commonBackoffPeriod on…	1 msInteger32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.13
hmtsRevACKTimeout This is the acknowledge timeout as described in the commonACKTimeoutWindow object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used by the HMTS to preset and maintain the value of commonACKTimeo…	1 msInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.14
hmtsRevMaxMACRetries This is the maximum retries as described in the commonMaximumMACLayerRetries object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used by the HMTS to preset and maintain the value of commonMaximu…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.15
hmtsRevBackOffMinExp This is the minimum exponent as described in the commonBackoffMinimumExponent object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used by the HMTS to preset and maintain the value of commonBacko…	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.16
hmtsRevBackOffMaxExp This is the maximum exponent as described in the commonBackoffMaximumExponent object in the SCTE 38-3 (formerly HMS024) SCTE-HMS-COMMON-MIB. This value is used by the HMTS to preset and maintain the value of commonBacko…	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.17

The Device Table is the repository of all information known
about each transponder.  The termination system keeps track of
this information base on MAC Address.  The device table is an
unabridged list of information.
          
The contents of the entries in this table are non-volatile.

hmtsDevEntry row .1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1

A list of information about each device.

Indexes

hmtsDevPhysAddr

Column	Syntax	OID
hmtsDevPhysAddr This is the physical MAC address of the network element that this device entry pertains.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.1
hmtsDevIPAddr This is the device IP address assigned of the network element that this device entry pertains. The default IP address is 0.0.0.0. When one tries to set an IP address that is not accepted by the HMTS a bad value error …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.2
hmtsDevCommString This is the community string assigned to the network element that this device entry pertains. If hmtsCommManagementMethod is automatic then how the community string is set is vendor specific. This object can not be se…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.3
hmtsDevFwdPortId This is the Id of the HMTS' forward path port or transmitter used to communicate with the corresponding network element. This uniquely identifies the table entry in the hmtsFwdPortTable. The forward port id is actually …	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.4
hmtsDevRevPortId This is the id of the HMTS' reverse path port or receiver used to communicate with the corresponding network element. This uniquely identifies the table entry in the hmtsRevPortTable. This value will default to an empt…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.5
hmtsDevComStat This reports the current device communication status with the corresponding network element. Entries with the value of other than noError(1) shall be list in the hmtsComFaultTable. This object has a discrete property i…	HmtsComStatCodes Type Values: 1 noError 2 noRevPortId 3 notActive 4 notRegis 5 pendRegis 6 registering 7 transDisabled 8 rcvrDisabled 9 rtrnLvl 10 notResp 11 invMac 12 fwdFreqMismatch 20 invIP 21 dupIP 30 invComm 31 dupComm 32 other	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.6
hmtsDevReturnLvl This is the return level as recorded on the last response from this device. This value only applies to transponders that are accessed via the serial RF link, noSuchName shall be returned when the device is accessed via…	0.1 dBmVSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.7
hmtsDevLastStateChg This is the time of the last state change to this hmtsDevComStat object's value. All values are unsigned 32 bit integers. Time since the Epoch (00:00:00, January 1, 1970), measured in seconds(POSIX Time format).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.8
hmtsDevLastRespTime This is the time of the last response received from this device. All values are unsigned 32 bit integers. Time since the Epoch (00:00:00, January 1, 1970), measured in seconds(POSIX Time format).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.9
hmtsDevRqstCount This is the total number of unicast requests made to this device. This unsigned value is reset to zero by setting its value to zero. Setting this value to a non-zero value will result in a bad value error. The resett…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.10
hmtsDevRespTimeoutCount This is the total number of unicast requests that have timed out. This is an unsigned value that is reset to zero by setting its value to zero. Setting this value to a non-zero value will result in a bad value error. …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.11
hmtsDevContNRespCount This is the contiguous number of unicast requests that have timed out for this device. Upon the receipt of a valid response this value is reset to zero. This object has a threshold property in the propertyTable as defi…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.12
hmtsDevRegStatus This identifies the status of the device: Registered - the device has successfully registered. Registering - the device is in the process of registering. Not Registered - the device has not yet registered.	Enumeration Enumerated Values: 1 registered 2 registering 3 notRegistered	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.13
hmtsDevRegTime This is the time the device last completed registration. All values are unsigned 32 bit integers. Time since the Epoch (00:00:00 UTC, January 1, 1970), measured in seconds(POSIX Time format).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.14
hmtsDevRowStatus This is used to add and delete rows from this table dynamically. The RowStatus textual convention has been defined in the SNMPv2-TC MIB (RFC 2579). According to this RFC, the meaning of the different RowStatus states fo…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.15

This table identifies the MAC addresses of devices that have a
problem in registering or communicating with the HMTS.  Only
devices with hmtsDevComStat value other than noError(1) will
have entries in this table.
          
It is the responsability of the HMTS to keep the contents of the
hmtsDevTable, hmtsComFaultTable, hmtsIPDevTable and hmtsCommDevTable
consistent according to the following rules:
- For each active row in hmtsDevTable whose hmtsDevComStat instance
  is different of noError(1), there must be a row with the same
  physical address in hmtsComFaultTable.
- For each row in hmtsComFaultTable, there must be a
  corresponding row in hmtsDevTable with RowStatus active.
- Each active row in the hmtsDevTable that has a valid IP address 
  must also be present in the hmtsIPDevTable.
- For each row in hmtsIPDevTable there must be a corresponding
  row in hmtsDevTable with rowstatus active.
- Each active row in the hmtsDevTable that has a valid community
  string and whose RowStatus is active must also be present in
  hmtsCommDevTable.
- For each row that exists in hmtsCommDevTable there must
  exist a row with the same community string in hmtsDevTable with
  RowStatus active.
- An IP address is valid if there does not exist another row in the
  hmtsDevTable with the same IP address and RowStatus active, and if
  it has been assigned by either an external DHCP server, the
  internal DHCP server (if hmtsIPManagementMethod is set to client)
  or if it fits in one of the ranges defined by hmtsNetAddrTable
  (if hmtsIPManagementMethod is set to manualXP, manualHMTS or
  automatic).
- A community string is valid if there does not exist another row in
  the hmtsDevTable with the same community string and RowStatus
  active.

hmtsComFaultEntry row .1.3.6.1.4.1.5591.1.11.3.2.1.3.7.1

A list of devices that are either not communicating or are not
registered with the HMTS.

Indexes

hmtsComStatPhysAddr

Column	Syntax	OID
hmtsComStatPhysAddr This is the physical MAC address of the network element that this entry pertains.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.5591.1.11.3.2.1.3.7.1.1
hmtsComStat This is a specific communication Status indicating the reason of this records entry exists. This is the value of hmtsDevComStat in the hmtsDevTable	HmtsComStatCodes Type Values: 1 noError 2 noRevPortId 3 notActive 4 notRegis 5 pendRegis 6 registering 7 transDisabled 8 rcvrDisabled 9 rtrnLvl 10 notResp 11 invMac 12 fwdFreqMismatch 20 invIP 21 dupIP 30 invComm 31 dupComm 32 other	.1.3.6.1.4.1.5591.1.11.3.2.1.3.7.1.2

The multicast address table lists the known multicast/broadcast
MAC addresses and provides a translation to either an IP address
or a community string.
The entries in this table are non-volatile.

hmtsMulticastAddrEntry row .1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1

A list of information about each known multicast address.

Indexes

hmtsMulticastPhysAddr

Column	Syntax	OID
hmtsMulticastPhysAddr This is a known multicast or broadcast MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1.1
hmtsMulticastIPAddr This is the assigned IP address associated to this Multicast or broadcast MAC address. This is Mandatory for HMTS' that support IP based proxies. This IP address shall not be used in an active row of the hmtsDevTable.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1.2
hmtsMulticastCommString This is the community string associated to this Multicast or broadcast MAC address. This is current for HMTS' that support community string based proxies. This Community String shall not be used in an active row of th…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1.3
hmtsMulticastRowStatus This is used to add and delete rows from this table dynamically. IP address and/or Community Strings should be distinct from other entries in this table and in the hmtsDevTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5591.1.11.3.2.1.3.8.1.4

The IP address is the index to this view of the hmtsDevTable.
Only the devices that have a device state of registered are
listed in this view.  This table is current for HMTS that
support the IP proxy as defined in SCTE 25-2 (Formerly HMS004).
          
It is the responsability of the HMTS to keep the contents of the
hmtsDevTable, hmtsComFaultTable, hmtsIPDevTable and hmtsCommDevTable
consistent according to the following rules:
- For each active row in hmtsDevTable whose hmtsDevComStat instance
  is different of noError(1), there must be a row with the same
  physical address in hmtsComFaultTable.
- For each row in hmtsComFaultTable, there must be a
  corresponding row in hmtsDevTable with RowStatus active.
- Each active row in the hmtsDevTable that has a valid IP address 
  must also be present in the hmtsIPDevTable.
- For each row in hmtsIPDevTable there must be a corresponding
  row in hmtsDevTable with rowstatus active.
- Each active row in the hmtsDevTable that has a valid community
  string and whose RowStatus is active must also be present in
  hmtsCommDevTable.
- For each row that exists in hmtsCommDevTable there must
  exist a row with the same community string in hmtsDevTable with
  RowStatus active.
- An IP address is valid if there does not exist another row in the
  hmtsDevTable with the same IP address and RowStatus active, and if
  it has been assigned by either an external DHCP server, the
  internal DHCP server (if hmtsIPManagementMethod is set to client)
  or if it fits in one of the ranges defined by hmtsNetAddrTable
  (if hmtsIPManagementMethod is set to manualXP, manualHMTS or
  automatic).
- A community string is valid if there does not exist another row in
  the hmtsDevTable with the same community string and RowStatus
  active.

hmtsIPDevEntry row .1.3.6.1.4.1.5591.1.11.3.2.1.4.2.1

A list of information about each device.

Indexes

hmtsIPDevAddr

Column	Syntax	OID
hmtsIPDevAddr This is the device IP address assigned of the network element that this device entry pertains.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.5591.1.11.3.2.1.4.2.1.1
hmtsIPPhysAddr This is the physical MAC address of the network element that this device entry pertains.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.5591.1.11.3.2.1.4.2.1.2

This table provides a list of networks from which the HMTS
may select an IP address to automatically assign to a device.
This table shall also be used to verify manually entered
IP addresses (Device or Multicast) and IP Address originating
from the transponders. This table will be ignored by the HMTS
when hmtsIPManagementMethod is set to client.
          
This table is mandatory if the HMTS
supports IP address assignment as described in
hmtsIPManagementMethod.
          
Changing an existing entry in this table may cause IP address
currently in use to become invalid.  The HMTS shall support the
reassignment of IP addresses, by reassigning IP addresses of
devices that no longer have valid IPs.  How this is accomplished
is vender specific.
          
This is a non-volatile table.

hmtsNetAddrEntry row .1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1

A list of information about each network that this
HMTS participates in for the access of the network
elements that it acts as a gateway.

Indexes

hmtsNetStartAddr

Column	Syntax	OID
hmtsNetStartAddr This is the first usable network IP address in the range of addresses that this entry describes.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1.1
hmtsNetEndAddr This is the last usable network IP address in the range of addresses that this entry describes.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1.2
hmtsNetMask This is the network mask for the addresses that this entry describes.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1.3
hmtsNetRowStatus This is used to add and delete rows from this table dynamically.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5591.1.11.3.2.1.4.3.1.4

The Community String is the index to this view of the
hmtsDevTable.  Only the devices that have successfully
registered at least once are listed in this view.  This table is
current for HMTS that support the community string proxy as
defined in SCTE 25-2 (Formerly HMS004).
          
It is the responsability of the HMTS to keep the contents of the
hmtsDevTable, hmtsComFaultTable, hmtsIPDevTable and hmtsCommDevTable
consistent according to the following rules:
- For each active row in hmtsDevTable whose hmtsDevComStat instance
  is different of noError(1), there must be a row with the same
  physical address in hmtsComFaultTable.
- For each row in hmtsComFaultTable, there must be a
  corresponding row in hmtsDevTable with RowStatus active.
- Each active row in the hmtsDevTable that has a valid IP address 
  must also be present in the hmtsIPDevTable.
- For each row in hmtsIPDevTable there must be a corresponding
  row in hmtsDevTable with rowstatus active.
- Each active row in the hmtsDevTable that has a valid community
  string and whose RowStatus is active must also be present in
  hmtsCommDevTable.
- For each row that exists in hmtsCommDevTable there must
  exist a row with the same community string in hmtsDevTable with
  RowStatus active.
- An IP address is valid if there does not exist another row in the
  hmtsDevTable with the same IP address and RowStatus active, and if
  it has been assigned by either an external DHCP server, the
  internal DHCP server (if hmtsIPManagementMethod is set to client)
  or if it fits in one of the ranges defined by hmtsNetAddrTable
  (if hmtsIPManagementMethod is set to manualXP, manualHMTS or
  automatic).
- A community string is valid if there does not exist another row in
  the hmtsDevTable with the same community string and RowStatus
  active.

hmtsCommDevEntry row .1.3.6.1.4.1.5591.1.11.3.2.1.5.2.1

A list of information about each device.

Indexes

hmtsCommString

Column	Syntax	OID
hmtsCommString This is the community string assigned of the network element that this device entry pertains.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.5591.1.11.3.2.1.5.2.1.1
hmtsCommPhysAddr This is the physical MAC address of the network element that this device entry pertains.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.5591.1.11.3.2.1.5.2.1.2