hmtsRevFrequency

SCTE-HMS-HMTS-MIB · .1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.7
Commands MIB view Table view

Object

column r/w 1 HzSNMPv2-SMIInteger32 
This is the return path frequency of both the HMTS' reverse
path modem and the network element's reverse path transmitter.
This value only applies to the RF port type; all
other port types should return noSuchName.  This value is
used in the broadcasted CHNLDESC PDU.  When this value is set
the CHNLDESC PDU shall be immediately issued.
It is recommended that the commands to change the frequency
be issued more than once, to insure proper setting.
RESOLUTION: <=100 Hz
This object is non-volatile.

Context

MIB
SCTE-HMS-HMTS-MIB
OID
.1.3.6.1.4.1.5591.1.11.3.2.1.2.6.1.7
Type
column
Access
readwrite
Status
current
Units
1 Hz
Parent
hmtsRevPortEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SCTE-HMS-HMTS-MIB' -M '/opt/observium/mibs/scte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCTE-HMS-HMTS-MIB::hmtsRevFrequency'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'SCTE-HMS-HMTS-MIB' -M '/opt/observium/mibs/scte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SCTE-HMS-HMTS-MIB::hmtsRevFrequency.<hmtsRevPortId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'SCTE-HMS-HMTS-MIB' -M '/opt/observium/mibs/scte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SCTE-HMS-HMTS-MIB::hmtsRevFrequency'

Syntax

1 HzSNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Conformance

Member of
hmtsReqManagementGroup