hmtsDevRowStatus

This is used to add and delete rows from this table dynamically.
The RowStatus textual convention has been defined in the SNMPv2-TC
MIB (RFC 2579). According to this RFC, the meaning of the different
RowStatus states for this table is as follows:
- active: the HMTS may perform unicast, multicast and broadcast
  communication with the device, using the communication parameters
  specified in the corresponding row. It does not matter whether or
  not there exists a physical device with the specified MAC address,
  or whether it is responding or not.
- notInService: the HMTS may not perform any communication with the
  device with the specified MAC address. Traps for this device will
  not be forwarded to any EMS.
- notReady: the RowStatus will be notReady if one or more of the
  following conditions is met:
  * the MAC address in the corresponding row is either
    all-zeroes, or a multicast MAC address.                            
  * the IP address is not 0.0.0.0, the HMTS is IP based and there is
    another active row with the same IP address.
  * the community string is not equal to hmtsDefaultCommString, the
    HMTS is community based and there is another active row with the
    same community string.
  * No forward port has been configured, or a non-existing forward
    port has been specified.
                         
During auto discovery if the row did not have a Reverse port ID
assigned (that is the row status is notReady) and the reverse
port id has been discovered then the HMTS may automatically
activate the row.  However, if the row status is notInService
than the HMTS shall not automatically activate the row.
              
Entries that are not active in this table or have the default
IP address or community string shall not appear in the
tables hmtsIPDevTable and hmtsCommDevTable.

MIB

SCTE-HMS-HMTS-MIB

OID

.1.3.6.1.4.1.5591.1.11.3.2.1.3.6.1.15

Type

column

Access

readwrite

Status

current

Parent

hmtsDevEntry