saRgIpMgmtLanNetworksAllow

Allows the user via the internal Web GUI (Lan Setup page
to input an IPv4 public or private Local IP address other than a
class C Private address (the default Network for the Primary BSS = 192.168.0.0/24, with
the default Local Ip address = 192.168.0.1.)
In all cases the mask must be 255.255.255.x since the RG is limited to supporting
a maximum of 253 IP addresses.
(See RFC1918 for a description of private IP addresses and specified ranges.)
Available Mib settings:
default(0):                     Only the third and fourth octets are editable in
                                        the Web GUI for the Local IP address (Ex. 192.168.x.x/24).
anyPrivateClass(1):     All 4 octets are editable in the Web GUI for Local IP address, but
                                        the network specified must be a Private class A, B or C network address.
                                        (Ex. A=10.x.x.x, B=172.16.x.x, C=192.168.x.x).
anyClass(2):            All 4 octets are editable in the Web GUI for Local IP address, and
                                        the network specified could be any public or private class A, B, or C address.
              
If the MSO specifically sets a Local IP address in saRgIpMgmtLanNetwork to a value other than
the default value (for example: 192.168.0.1) then these fields will be uneditable by the user (grayed out).

MIB

SA-RG-MIB

OID

.1.3.6.1.4.1.1429.79.2.3.2.1.4

Type

column

Access

readwrite

Status

current

Parent

saRgIpMgmtLanEntry