SA-RG-MIB Table View

Up to 3 NTP servers are supported. This table
is stored in non-vol. Default entries after factory
reset are:
1: time.nist.gov
2: nist.aol-ca.truetime.com
3: nist1-ny.glassey.com

saRgDeviceTimeSetupNtpServerEntry row .1.3.6.1.4.1.1429.79.2.1.5.2.1

Indexes

saRgDeviceTimeSetupNtpServerIndex

Column	Syntax	OID
saRgDeviceTimeSetupNtpServerIndex The index	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.1429.79.2.1.5.2.1.1
saRgDeviceTimeSetupNtpServerAddress IP address or FQDN of the NTP server.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.1.5.2.1.2

Table of IA Address entries associated with IA_NA for the
eRouter's DHCPv6 lease.

saRgDeviceIanaEntry row .1.3.6.1.4.1.1429.79.2.1.7.4.1

Table of IA Address entries associated with IA_NA for the
eRouter's DHCPv6 lease.

Indexes

saRgDeviceIanaIndex

Column	Syntax	OID
saRgDeviceIanaIndex The index	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.1429.79.2.1.7.4.1.1
saRgDeviceIanaValue IPv6 address provided to the eRouter WAN interface via DHCPv6.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.1.7.4.1.2
saRgDeviceIanaPreferredLifetime Preferred Lifetime setting for an IPv6 address assigned to the eRouter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.1.7.4.1.3
saRgDeviceIanaValidLifetime Valid Lifetime setting for an IPv6 address assigned to the eRouter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.1.7.4.1.4

Table of IA Prefix entries associated with IA_PD for the
eRouter's DHCPv6 lease.

saRgDeviceIapdEntry row .1.3.6.1.4.1.1429.79.2.1.8.4.1

Table of IA Address entries associated with IA_PD for the
eRouter's DHCPv6 lease.

Indexes

saRgDeviceIapdIndex

Column	Syntax	OID
saRgDeviceIapdIndex The index	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.1429.79.2.1.8.4.1.1
saRgDeviceIapdPreferredLifetime Preferred Lifetime setting for an IPv6 address assigned to the eRouter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.1.8.4.1.2
saRgDeviceIapdValidLifetime Valid Lifetime setting for an IPv6 address assigned to the eRouter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.1.8.4.1.3
saRgDeviceIapdPrefixLength Length (in bits) for this prefix.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.1.8.4.1.4
saRgDeviceIapdPrefixValue Prefix address specified in the IA_PD.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.1.8.4.1.5

BSS table

saRgDot11BssEntry row .1.3.6.1.4.1.1429.79.2.2.2.1.1

A row in the table which represents parameters for SSID.

Indexes

IF-MIBifIndex

Column	Syntax	OID
saRgDot11BssId Returns the BSSID	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.1429.79.2.2.2.1.1.1
saRgDot11BssEnable Controls the BSS state. When set to enableOnline(3), the SSID is enabled only when the cable modem is online. When the modem changes state to offline, the AP will send dissasociation messages to the STAs connected to th…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 enableOnline	.1.3.6.1.4.1.1429.79.2.2.2.1.1.2
saRgDot11BssSsid Controls and reflects the service set identifier. The value of primary BSS is stored in non-vol and is empty after factory reset. If other BSS's SSID name is not defined, the BSS will not be enabled.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1429.79.2.2.2.1.1.3
saRgDot11BssSecurityMode Secrity for BSS. Beacause WPA2 is backwords compatible with WPA, setting this object to wpaWpa2Psk(7) is allowed and has the same effect as setting to wpa2Psk(3). The same is true for wpaWpa2Enterprise(8) and wpa2Enterp…	Enumerationr/w Enumerated Values: 0 disabled 1 wep 2 wpaPsk 3 wpa2Psk 4 wpaEnterprise 5 wpa2Enterprise 7 wpaWpa2Psk 8 wpaWpa2Enterprise	.1.3.6.1.4.1.1429.79.2.2.2.1.1.4
saRgDot11BssClosedNetwork Controls whether the device will operate in closed network mode. If set to true(1), then the network mode is closed and the SSID will not be broadcast in beacon packets. If set to false(2), then the network mode is op…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1429.79.2.2.2.1.1.5
saRgDot11BssAccessMode Controls what stations will be given access to the device. If set to allowAny(0), then any station will be allowed to connect. If set to allowList(1), then only stations whose MAC address appears in the saRgDot11Acces…	Enumerationr/w Enumerated Values: 0 allowAny 1 allowList 2 denyList	.1.3.6.1.4.1.1429.79.2.2.2.1.1.6
saRgDot11BssMaxNumSta This object defines the maximum number of STAs that can connect to this SSID. Note that the maximum number of STA accross all SSIDs in the AP is 128. Default value is 128 for all SSIDs. The value for primary BSS is stor…	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.1429.79.2.2.2.1.1.11
saRgDot11BssUserStatus Provides the BSS Id Web UI or Wireless ON/OFF (if exist) status that is set by the user. If the user can press the Wireless ON/OFF (if exist) button and its status can be seen in BSS ID Web UI. If user changes access po…	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1429.79.2.2.2.1.1.13
saRgDot11BssApIsolation This MIB is only available in D3.0 products. AP Isolation (Access Point Isolation) allows you to isloate traffic between CPEs on the same Wifi SSID. This allows a measure of security to prevent hackers from accessing ot…	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1429.79.2.2.2.1.1.15
saRgDot11BssSecSsidTrafficPriority This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot environment. When disabled, all the traffic to the secondary SSID in question would have same WMM QoS parameters as the primary SS…	Enumeration Enumerated Values: 0 disable 1 acBk	.1.3.6.1.4.1.1429.79.2.2.2.1.1.16
saRgDot11BssRejectPriSsidSta This MIB is only available in D3.0 products and applicable for secondary SSID in hotspot environment. By default, a private SSID STA can associate to hotspot SSID. This MIB can be used to reject private SSID STAs to ass…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1429.79.2.2.2.1.1.17

WPA table

saRgDot11WpaEntry row .1.3.6.1.4.1.1429.79.2.2.3.1.1

A row in the table which represents WPA parameters for BSS.

Indexes

IF-MIBifIndex

Column	Syntax	OID
saRgDot11WpaAlgorithm The value of tkip(0) is not allowed when security is WPA2. The value for primary BSS is stored in non-vol and tkipPlusAes(2) after factory reset. The default value for other BSSs is tkip.	Enumerationr/w Enumerated Values: 0 tkip 1 aes 2 tkipPlusAes	.1.3.6.1.4.1.1429.79.2.2.3.1.1.1
saRgDot11WpaPreSharedKey Sets the WPA Pre-Shared Key (PSK). This value MUST be either a 64-digit hexadecimal number, OR a 8 to 63 character ASCII string. The value for primary BSS is stored in non-vol and is the serial number of the device aft…	OctetStringr/w Constraints: range: 8-64	.1.3.6.1.4.1.1429.79.2.2.3.1.1.2
saRgDot11WpaGroupRekeyInterval Sets the WPA Group Rekey Interval in seconds. Set to zero to disable periodic rekeying. The value for primary BSS is stored in non-vol and is 3600 after factory reset. The default value for other BSSs is 3600.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.2.3.1.1.3

WPA table

saRgDot11RadiusEntry row .1.3.6.1.4.1.1429.79.2.2.3.2.1

A row in the table which represents WPA parameters for BSS.

Indexes

IF-MIBifIndex

Column	Syntax	OID
saRgDot11RadiusAddressType Type of RADIUS server IP address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.1429.79.2.2.3.2.1.1
saRgDot11RadiusAddress Sets RADIUS server IP address. The value for primary BSS is stored in non-vol and is 0.0.0.0 after factory reset. The default value for other BSSs is 0.0.0.0.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.2.3.2.1.2
saRgDot11RadiusPort Sets the UDP port used to communicate with the RADIUS server. The value for primary BSS is stored in non-vol and is 1645 after factory reset. The default value for other BSSs is 1645.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.2.3.2.1.3
saRgDot11RadiusKey Sets or displays the RADIUS key. The value for primary BSS is stored in non-vol and is null after factory reset. The default value for other BSSs is null. This object return an empty string when read.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1429.79.2.2.3.2.1.4
saRgDot11RadiusReAuthInterval Sets the RADIUS Rekey Interval in seconds. Set to zero to disable periodic rekeying. The value for primary BSS is stored in non-vol and is 3600 after factory reset. The default value for other BSSs is 3600.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.2.3.2.1.5

WEP table

saRgDot11WepEntry row .1.3.6.1.4.1.1429.79.2.2.3.3.1

A row in the table which represents WPA parameters for BSS.

Indexes

IF-MIBifIndex

Column	Syntax	OID
saRgDot11WepDefaultKey Controls and reflects the default key which will be used when 64 or 128 bit encryption is enabled. Indicates the entry from the saRgDot1164BitKeyTable if saRgDot11EncryptionMode is set to wep64(1), or the entry from th…	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.1429.79.2.2.3.3.1.1
saRgDot11WepEncryptionMode The value for primary BSS is stored in non-vol and is wep128(1) after factory reset. The default value for other BSSs is wep128.	Enumerationr/w Enumerated Values: 0 wep64 1 wep128	.1.3.6.1.4.1.1429.79.2.2.3.3.1.2
saRgDot11WepPassPhrase Controls and reflects the WEP pass phrase. The value for primary BSS is stored in non-vol and is null after factory reset. The default value for other BSSs is null. This object return an empty string when read.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1429.79.2.2.3.3.1.3

A table of 40 bit key values used when saRgDot11WepEncryptionMode
is set to wep64(0).

saRgDot11Wep64BitKeyEntry row .1.3.6.1.4.1.1429.79.2.2.3.4.1

A row in the table which represents a single 64 bit key.

Indexes

IF-MIBifIndex saRgDot11Wep64BitKeyIndex

Column	Syntax	OID
saRgDot11Wep64BitKeyIndex Identifies the instance of this table row.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.1429.79.2.2.3.4.1.1
saRgDot11Wep64BitKeyValue A 40 bit key to be used when saRgDot11WepEncryptionMode is set to wep64(1). The value for primary BSS is stored in non-vol and is all 1's after factory reset. The default value for other BSSs is all 0's. This object ret…	OctetStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.1429.79.2.2.3.4.1.2

A table of 104 bit key values used when saRgDot11WepEncryptionMode
is set to wep128(1).

saRgDot11Wep128BitKeyEntry row .1.3.6.1.4.1.1429.79.2.2.3.5.1

A row in the table which represents a single 128 bit key.

Indexes

IF-MIBifIndex saRgDot11Wep128BitKeyIndex

Column	Syntax	OID
saRgDot11Wep128BitKeyIndex Identifies the instance of this table row.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.1429.79.2.2.3.5.1.1
saRgDot11Wep128BitKeyValue A 104 bit key to be used when saRgDot11WepEncryptionMode is set to wep128(2). The value for primary BSS is stored in non-vol and is all 1's. The default value for other BSSs is all 0's. This object return an empty strin…	OctetStringr/w Constraints: range: 13-13	.1.3.6.1.4.1.1429.79.2.2.3.5.1.2

A table of wireless clients that are associated with the BSS.

saRgDot11ClientEntry row .1.3.6.1.4.1.1429.79.2.2.4.2.1

A row in the table that specifies a single station MAC address.

Indexes

IF-MIBifIndex saRgDot11ClientIndex

Column	Syntax	OID
saRgDot11ClientIndex Indicates the instance of this table row.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.1429.79.2.2.4.2.1.1
saRgDot11ClientStation A MAC address of a client associated with the BSS.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1429.79.2.2.4.2.1.2

Multiple Radio Configuration Table

saRgDot11ExtMgmtEntry row .1.3.6.1.4.1.1429.79.2.2.6.1.1

A row in the table which represents parameters for a Radio.
Index 32 should be set for Radio 0 -- 2.4 GHz if populated.
Index 112 should be set for Radio 1

Indexes

IF-MIBifIndex

Column	Syntax	OID
saRgDot11ExtMbssUserControl Sets the number of user controlled Wifi networks via web pages. 1: The user has control over the primary wireless network only. No guest network page is displayed. 2: The user has control over the primary wireless ne…	Integer32r/w Constraints: range: 1-8 range: 65536-16711680	.1.3.6.1.4.1.1429.79.2.2.6.1.1.15
saRgDot11ExtMbssUseNonvol Allows to save additional BSS parameters to non-vol if set to true. Primary BSS parameters are ALWAYS stored in non-vol. This object value is stored in non-vol and set to false after factory reset.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1429.79.2.2.6.1.1.16
saRgDot11ExtMbssAdminControl Sets the number of admin controlled Wifi networks via web pages. 1: The admin has control over the primary wireless network only. No guest network page is displayed. 2: The admin has control over the primary wireless…	Integer32r/w Constraints: range: 1-8 range: 65536-16711680	.1.3.6.1.4.1.1429.79.2.2.6.1.1.17
saRgDot11ExtActualChannel Reports the current channel number that wireless is on. The value of 0 means wireless is disabled.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.2.6.1.1.18

Networks on the LAN side.
Primary BSS stored in non-vol.

saRgIpMgmtLanEntry row .1.3.6.1.4.1.1429.79.2.3.2.1

List of networks on the LAN side.

Indexes

IF-MIBifIndex

Column	Syntax	OID
saRgIpMgmtLanMode Defines the mode of operation for the device. Setting this object via SNMP for the primary BSS will cause the unit to reboot. Setting this object via SNMP for the secondary BSSs will not cause the unit to reboot. The va…	Enumerationr/w Enumerated Values: 1 bridge 2 router 3 l2tpv2-client 4 mixed 5 vlan	.1.3.6.1.4.1.1429.79.2.3.2.1.1
saRgIpMgmtLanNetwork The LAN-Trans network number. Default for primary BSS is 192.168.0.0 Default for other BSSs is 192.168.ifIndex.0	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.2.1.3
saRgIpMgmtLanNetworksAllow Allows the user via the internal Web GUI (Lan Setup page to input an IPv4 public or private Local IP address other than a class C Private address (the default Network for the Primary BSS = 192.168.0.0/24, with the defau…	Enumerationr/w Enumerated Values: 0 default 1 anyPrivateClass 2 anyClass	.1.3.6.1.4.1.1429.79.2.3.2.1.4
saRgIpMgmtLanSubnetMask The device MUST provide the value of this MIB object in the Option 1 (Subnet Mask) of DHCP OFFER and ACK messages sent to a LAN IP Device.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.2.1.5
saRgIpMgmtLanGateway The type of this address is specified by saRgIpMgmtLanNetwokRouterType. The PS MUST provide the value of this MIB object in the Option 3 (Router IP address) of the DHCP OFFER and ACK messages sent to the LAN IP Device. …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.2.1.7
saRgIpMgmtLanDhcpServer The value for primary BSS is stored in non-vol. The default value for other BSSs is: Enabled by default if interface is in router mode. Always disabled if interface is in bridge mode.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1429.79.2.3.2.1.8
saRgIpMgmtLanNapt The value for primary BSS is stored in non-vol. The default value for other BSSs is: Enabled by default if interface is in router mode. Always disabled if interface is in bridge mode.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1429.79.2.3.2.1.9
saRgIpMgmtLanTypeOfService Definition of the TOS bits for the Network. This object does not apply to primary BSS.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.3.2.1.10
saRgIpMgmtLanDhcp125Option This option controls if the RG adds a Cisco specific suboption (number 17) to DHCP DISCOVER and REQUEST from the clients that are bridged on the BSS: 0: do not add the option 1: add suboption 17 to Cisco specific enterp…	Enumerationr/w Enumerated Values: 0 disable 1 addSsidName	.1.3.6.1.4.1.1429.79.2.3.2.1.11
saRgIpMgmtLanUpnp Enable/Disable the UPnP agent. The value is stored in non-vol and is disabled after factory default for the primary SSID. The UPnP agents for additional networks are enabled by default.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.1429.79.2.3.2.1.13
saRgIpMgmtLanDhcpOption43 If option 60 is set from the CPE then return this value in option 43 of the DHCP Reply. If this value is null then do not reply with option 43 (default is null) This MIB will apply to the Primary SSID (intface .32) only	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.3.2.1.14

Networks on the LAN side.
Stored in non-vol. .10-.128 for primary BSS
after factory reset.

saRgIpMgmtLanDhcpServerEntry row .1.3.6.1.4.1.1429.79.2.3.3.1

List of networks on the LAN side.

Indexes

IF-MIBifIndex

Column	Syntax	OID
saRgIpMgmtLanDhcpServerPoolStart The start of range LAN Trans IP Addresses. The type of this address is specified by saRgIpMgmtLanDhcpServerPoolStartType. Default value depends on IP network and subnet.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.3.1.2
saRgIpMgmtLanDhcpServerPoolEnd The end of range for LAN-Trans IP Addresses. The type of this address is specified by saRgIpMgmtLanDhcpServerPoolEndType. Default value depends on IP network and subnet.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.3.1.4
saRgIpMgmtLanDhcpServerLeaseTime The PS MUST provide the value of this MIB object in the Option 51 (IP Address lease time) of the DHCP OFFER and ACK messages sent to the LAN IP Device.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1429.79.2.3.3.1.5

IP addresses of devices served by DHCP servers.

saRgIpMgmtLanAddrEntry row .1.3.6.1.4.1.1429.79.2.3.4.1

List of general parameters pertaining to LAN-Trans IP
address reservations and leases.

Indexes

IF-MIBifIndex saRgIpMgmtLanAddrIndex

Column	Syntax	OID
saRgIpMgmtLanAddrIndex The index of the the LAN IP Device in the LAN-Trans Realm.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.1429.79.2.3.4.1.1
saRgIpMgmtLanAddrIp	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.4.1.3
saRgIpMgmtLanAddrPhysAddr The client's (i.e., LAN IP Device's) hardware address as indicated in the chaddr field of its DHCP REQUEST message.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.1429.79.2.3.4.1.4
saRgIpMgmtLanAddrLeaseCreateTime This is the date and time when the LAN IP lease was created (if it has not yet been renewed) or last renewed.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.1429.79.2.3.4.1.5
saRgIpMgmtLanAddrLeaseExpireTime This is the date and time when the LAN IP address lease expired or will expire.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.1429.79.2.3.4.1.6
saRgIpMgmtLanAddrHostName This is the Host Name of the LAN IP address, based on DCHP option 12.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.3.4.1.7
saRgIpMgmtLanAddrClientId This is the Client Class Identifier, based on DHCP option 60.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.3.4.1.8
saRgIpMgmtLanAddrInterface This will show the associated interface (LAN, WiFi or MoCA) of the connected CPE.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.3.4.1.9

This table contains the IP addresses of cable network and
Internet DNS servers, in the order of preference in which
the PS's CNP will query them, when it cannot resolve a DNS
query using local information. Entries in this table are
updated with the information contained in DHCP Option 6,
received during both the WAN-Man and WAN-Data IP
acquisition processes.
Stored in non-vol and 0.0.0.0 for all servers after
factory reset.

saRgIpMgmtDnsServerEntry row .1.3.6.1.4.1.1429.79.2.3.5.1

List of cable network and Internet DNS servers.

Indexes

saRgIpMgmtDnsServerOrder

Column	Syntax	OID
saRgIpMgmtDnsServerIp This parameter indicates the IP address of a WAN DNS server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.5.1.3

Fixed IP address assignments for DHCP server.
Table does not return any row if DHCP disabled.
The value for primary BSS is stored in non-vol.

saRgIpMgmtDhcpFixedIpEntry row .1.3.6.1.4.1.1429.79.2.3.6.1

List of general parameters pertaining to LAN-Trans IP
address reservations and leases.

Indexes

IF-MIBifIndex saRgIpMgmtDhcpFixedIpIndex

Column	Syntax	OID
saRgIpMgmtDhcpFixedIpIndex The index of the the LAN IP Device in the LAN-Trans Realm.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.1429.79.2.3.6.1.1
saRgIpMgmtDhcpFixedIpRowStatus The row status. A row can be destroyed.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1429.79.2.3.6.1.2
saRgIpMgmtDhcpFixedIpAddress	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.6.1.4
saRgIpMgmtDhcpFixedIpPhysAddr The client's (i.e., LAN IP Device's) hardware address as indicated in the chaddr field of its DHCP REQUEST message.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.1429.79.2.3.6.1.5
saRgIpMgmtDhcpFixedIpHostName This is the Host Name of the LAN IP address, based on DCHP option 12.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.1429.79.2.3.6.1.6

Static route entries in the routing table.
This table is saved in non-vol and is empty
after factory reset.

saRgIpMgmtStaticRouteEntry row .1.3.6.1.4.1.1429.79.2.3.8.1

List of static route entries in the routing table.

Indexes

saRgIpMgmtStaticRouteIndex

Column	Syntax	OID
saRgIpMgmtStaticRouteIndex The index of the the table.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.1429.79.2.3.8.1.1
saRgIpMgmtStaticRouteRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1429.79.2.3.8.1.2
saRgIpMgmtStaticRouteNetwork Static route IP network definition	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.8.1.3
saRgIpMgmtStaticRouteSubnetMask Static route network mask definition	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.8.1.4
saRgIpMgmtStaticRouteGateway Gateway to the network defined in saRgIpMgmtStaticRouteNetwork and saRgIpMgmtStaticRouteSubnetMask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.8.1.5
saRgIpMgmtStaticRouteRipAdvertise If set to true(1), then static route entry will be advertised in RIP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1429.79.2.3.8.1.6

Additional IP addresses for primary LAN interface.
If RIP is enabled, all subnets are advertised.
All objects are stored in non-vol. The table
is empty after factory reset.

saRgIpMgmtLanExtraSubnetEntry row .1.3.6.1.4.1.1429.79.2.3.11.1

List of networks on the LAN side.

Indexes

IF-MIBifIndex

Column	Syntax	OID
saRgIpMgmtLanExtraSubnetIndex Indicates the instance of this table row.	Enumeration Enumerated Values: 1 secondSubnet 2 thirdSubnet 3 fourthSubnet	.1.3.6.1.4.1.1429.79.2.3.11.1.1
saRgIpMgmtLanExtraSubnetRowStatus The row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1429.79.2.3.11.1.2
saRgIpMgmtLanExtraSubnetIpAddress	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.11.1.3
saRgIpMgmtLanExtraSubnetSubnetMask	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.11.1.4
saRgIpMgmtLanExtraSubnetGateway	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.3.11.1.5

Table to control the mode for each LAN PORT.
LAN PORTs are numbered 1-4 and are mapped to physical
port location. Each port can either be in router or
in bridge mode.

saRgIpMgmtLanPortControlEntry row .1.3.6.1.4.1.1429.79.2.3.13.1.1

Indexes

saRgIpMgmtLanPortControlIndex

Column	Syntax	OID
saRgIpMgmtLanPortControlIndex The index for each LAN port	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.1429.79.2.3.13.1.1.1
saRgIpMgmtLanPortMode Each physical LAN port can either be controlled as bridge or router. The saRgIpMgmtLanPortMode MIB only works when SaRgIpMgmtLanMode.32=4(Mixed). Setting this MIB through SNMP will take effect only after saRgIpMgmtApply…	Enumerationr/w Enumerated Values: 1 bridge 2 router	.1.3.6.1.4.1.1429.79.2.3.13.1.1.2

This table is stored in non-vol and is empty
after factory reset.

saRgFirewallReportEventEntry row .1.3.6.1.4.1.1429.79.2.4.4.1.1

Indexes

saRgFirewallReportEventIndex

Column	Syntax	OID
saRgFirewallReportEventIndex The index	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.1429.79.2.4.4.1.1.1
saRgFirewallReportEventDescription	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.4.4.1.1.2
saRgFirewallReportEventCount	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1429.79.2.4.4.1.1.3
saRgFirewallReportEventLastOccurance	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.4.4.1.1.4
saRgFirewallReportEventTarget	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.4.4.1.1.5
saRgFirewallReportEventSource	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.1429.79.2.4.4.1.1.6

This table is stored in non-vol and is empty
after factory reset.

saRgFirewallIpFilterEntry row .1.3.6.1.4.1.1429.79.2.4.5.1.1

Indexes

saRgFirewallIpFilterIndex

Column	Syntax	OID
saRgFirewallIpFilterIndex The index	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.1429.79.2.4.5.1.1.1
saRgFirewallIpFilterRowStatus The row status. A row can be destroyed. If the row is not used, set to notInService.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1429.79.2.4.5.1.1.2
saRgFirewallIpFilterAddressStart	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.4.5.1.1.3
saRgFirewallIpFilterAddressEnd	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.4.5.1.1.4

This table is stored in non-vol and is empty
after factory reset.

saRgFirewallPortFilterEntry row .1.3.6.1.4.1.1429.79.2.4.5.2.1

Indexes

saRgFirewallPortFilterIndex

Column	Syntax	OID
saRgFirewallPortFilterIndex The index	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.1429.79.2.4.5.2.1.1
saRgFirewallPortFilterRowStatus The row status. A row can be destroyed. If the row is not used, set to notInService.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1429.79.2.4.5.2.1.2
saRgFirewallPortFilterPortStart	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.5.2.1.5
saRgFirewallPortFilterPortEnd	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.5.2.1.6
saRgFirewallPortFilterProto IP protocol to block.	Enumerationr/w Enumerated Values: 1 udp 2 tcp 3 udpTcp	.1.3.6.1.4.1.1429.79.2.4.5.2.1.7

A table of clients MAC addresses that are denied from accessing Internet.

saRgFirewallMacFilterEntry row .1.3.6.1.4.1.1429.79.2.4.5.3.1

A row in the table that specifies a single station MAC address.

Indexes

saRgFirewallMacFilterIndex

Column	Syntax	OID
saRgFirewallMacFilterIndex The index	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.1429.79.2.4.5.3.1.1
saRgFirewallMacFilterRowStatus The row status. A row can be destroyed. If the row is not used, set to notInService.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1429.79.2.4.5.3.1.2
saRgFirewallMacFilterAddress A MAC address of a station that cannot access Internet.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.1429.79.2.4.5.3.1.3

This table is stored in non-vol and is empty
after factory reset.

saRgFirewallPortFwdEntry row .1.3.6.1.4.1.1429.79.2.4.6.1

Indexes

saRgFirewallPortFwdIndex

Column	Syntax	OID
saRgFirewallPortFwdIndex The index	Integer32 Constraints: range: 1-30	.1.3.6.1.4.1.1429.79.2.4.6.1.1
saRgFirewallPortFwdRowStatus The row status. A row can be destroyed. If the row is not used, set to notInService.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1429.79.2.4.6.1.2
saRgFirewallPortFwdToAddress Valid address must be entered for a row to be created.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1429.79.2.4.6.1.3
saRgFirewallPortFwdPortStart Valid port must be entered for a row to be created.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.6.1.4
saRgFirewallPortFwdPortEnd Valid port must be entered for a row to be created.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.6.1.5
saRgFirewallPortFwdProto	Enumerationr/w Enumerated Values: 1 udp 2 tcp 3 udpTcp	.1.3.6.1.4.1.1429.79.2.4.6.1.6
saRgFirewallPortFwdExternalPortStart Valid port must be entered for a row to be created. This is the outside-facing start port for the portforward.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.6.1.8
saRgFirewallPortFwdExternalPortEnd Valid port must be entered for a row to be created. This is the outside-facing end port for the portforward.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.6.1.9

This table is stored in non-vol and is empty
after factory reset.

saRgFirewallPortTrigEntry row .1.3.6.1.4.1.1429.79.2.4.7.1

Indexes

saRgFirewallPortTrigIndex

Column	Syntax	OID
saRgFirewallPortTrigIndex The index	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.1429.79.2.4.7.1.1
saRgFirewallPortTrigRowStatus The row status. A row can be destroyed. If the row is not used, set to notInService.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1429.79.2.4.7.1.2
saRgFirewallPortTrigTriggerPortStart	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.7.1.3
saRgFirewallPortTrigTriggerPortEnd	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.7.1.4
saRgFirewallPortTrigTargetPortStart	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.7.1.5
saRgFirewallPortTrigTargetPortEnd	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1429.79.2.4.7.1.6
saRgFirewallPortTrigProto	Enumerationr/w Enumerated Values: 1 udp 2 tcp 3 udpTcp	.1.3.6.1.4.1.1429.79.2.4.7.1.7