saCmDsBonding

The MIB will choose whether to enable downstream 
channel bonding for bonding-capable modems.  
Non-bonding modems will ignore this MIB object.
0 : Disable downstream channel bonding. 
1 : Enable downstream channel bonding
			with all available RCP-IDs standard and proprietary. 
	 2 : Enable downstream bonding but only advertise
			standard RCP-IDs with 2 DS channels.
	 3 : Enable downstream bonding but only advertise
			standard RCP-IDs with 3 or fewer DS channels.
	 4 : Enable downstream bonding but only advertise
			standard RCP-IDs with 4 or fewer DS channels.
	 5 : Not currently applicable (same as 1)
	 6 : Not currently applicable (same as 1)
	 7 : Not currently applicable (same as 1)
	 8 : Enable downstream bonding but only advertise
			standard RCP-IDs with 8 or fewer DS channels.
This MIB will take effect at the next reboot.
This MIB value will be stored to NonVolatile
memory(NVM) and will persist across reboots.  If 
the MIB is set via the config file, the CM will 
store the new setting and reboot if a change is 
necessary.  Removing the setting from the config 
file will not change the value stored in NVM:  the 
CM will continue to operate using the previously 
stored value.
If an SNMP SET is used to modify the value, then 
the CM will not use the new setting until the next 
reboot occurs or is commanded.
A factory reset of the CM will set the stored
value back to 1.

MIB

SA-CM-MIB

OID

.1.3.6.1.4.1.1429.77.1.4.15

Type

scalar

Access

readwrite

Status

current

Parent

cmInterfaceInfo