SA-CM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

cmEthernetOperTable

table

.1.3.6.1.4.1.1429.77.1.4.41 · 1 row entry · 4 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk cmEthernetOperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SA-CM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SA-CM-MIB::cmEthernetOperTable'

Table for Ethernet interface link speed, duplex, mode, and operation.

cmEthernetOperEntry row .1.3.6.1.4.1.1429.77.1.4.41.1

Entries for Ethernet interface link speed, duplex, mode and operation.

Indexes

cmEthernetOperIndex

Column Syntax OID

cmEthernetOperIndex

Index used for the interfaces.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.1429.77.1.4.41.1.1

cmEthernetOperSetting

Displays the current Ethernet port link speed and duplex.
0: link-down(0),
1: half-duplex-10Mbps(1),
2: full-duplex-10Mbps(2),
3: half-duplex-100Mbps(3),
4: full-duplex-100Mbps(4),
5: ethernetNotConnected(5),
6: …

Enumeration

Enumerated Values:

0	link-down
1	half-duplex-10Mbps
2	full-duplex-10Mbps
3	half-duplex-100Mbps
4	full-duplex-100Mbps
5	ethernetNotConnected
6	half-duplex-1Gbps
7	full-duplex-1Gbps

.1.3.6.1.4.1.1429.77.1.4.41.1.2

cmEthernetOperMode

Displays the current Ethernet port speed and duplex link Mode.
1: Auto-negotiate(0)
2: Manual(1)

Enumeration

Enumerated Values:

0	auto-negotiate
1	manual

.1.3.6.1.4.1.1429.77.1.4.41.1.3

cmEthernetIfAdminStatus

For RG Mode this MIB provides a way to force the ifAdminStatus.x MIB settings
for the individual Ethernet ports to the values stored in cmEthernetAdminStatus.x.
This feature is activated by setting cmEthernetIfAdminOv…

Enumerationr/w

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.1429.77.1.4.41.1.4

saCmSoftwareTable

table

.1.3.6.1.4.1.1429.77.1.6.1 · 1 row entry · 11 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk saCmSoftwareTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SA-CM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SA-CM-MIB::saCmSoftwareTable'

Table for hardware specific software download.

saCmSoftwareEntry row .1.3.6.1.4.1.1429.77.1.6.1.1

Entries for hardware specific software download.

Indexes

saCmSwIndex

Column Syntax OID

saCmSwIndex

Index used to order the application of access entries.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.1429.77.1.6.1.1.1

saCmSwModel

Model name of the cable modem product.
If not set, applies to all models.
example: DPC2100

SNMP-FRAMEWORK-MIBSnmpAdminString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1429.77.1.6.1.1.2

saCmSwHwVer

Hardware version of the cable modem product.
If not set, applies to all versions.

SNMP-FRAMEWORK-MIBSnmpAdminString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1429.77.1.6.1.1.3

saCmSwBootLoader

Boot loader version of the cable modem product.
If not set, applies to all versions.

SNMP-FRAMEWORK-MIBSnmpAdminString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1429.77.1.6.1.1.4

saCmSwProtocol

Protocol used in cable modem product.

Enumeration

Enumerated Values:

0	any
1	ncs
2	sip

.1.3.6.1.4.1.1429.77.1.6.1.1.5

saCmSwFilename

Filename of the software image.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.1429.77.1.6.1.1.6

saCmSwServerdeprecated

TFTP server IP address where software image is located.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.1429.77.1.6.1.1.7

saCmSwAdminStatus

See docsDevSwAdminStatus for details.

Enumeration

Enumerated Values:

2	saCmSwAllowProvisioningUpgrade
3	saCmSwIgnoreProvisioningUpgrade

.1.3.6.1.4.1.1429.77.1.6.1.1.8

saCmSwMethod

Method of software download.

Enumeration

Enumerated Values:

1	secure
2	unsecure

.1.3.6.1.4.1.1429.77.1.6.1.1.9

saCmSwServerAddressType

This MIB defines the type of internet address to be used for the TFTP Server.
0: An unknown address type. This value MUST
be used if the value of the corresponding
InetAddress object is a zero-length string.
…

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.1429.77.1.6.1.1.11

saCmSwServerAddress

TFTP server IP address where software image is located.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1429.77.1.6.1.1.12

saCmWebAccessUserIfTypeTable

table

.1.3.6.1.4.1.1429.77.1.7.2 · 1 row entry · 3 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk saCmWebAccessUserIfTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SA-CM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SA-CM-MIB::saCmWebAccessUserIfTypeTable'

Table for various user/if type web access levels.

saCmWebAccessUserIfTypeEntry row .1.3.6.1.4.1.1429.77.1.7.2.1

Entries for various users/if type web access levels.

Indexes

saCmWebAccessUserTypeIndex saCmWebAccessIfTypeIndex

Column Syntax OID

saCmWebAccessUserTypeIndex

Access level for various user types.
home-user(1): This is intended to be used for home users
cus-admin(5): This is intended to be used for the CUSADMIN
adv-user(10): This type is intended to be used by MSO admin
all-u…

Enumeration

Enumerated Values:

1	home-user
5	cus-admin
10	adv-user
100	all-users

.1.3.6.1.4.1.1429.77.1.7.2.1.1

saCmWebAccessIfTypeIndex

Web access over various interface types.

lan(1): This will control the CPE interface on the lan side.
rf-cm(2): This will control the remote access to the web pages through
the CM public IP
mta(16): This …

Enumeration

Enumerated Values:

1	lan
2	rf-cm
16	mta
40	wan-rg
100	all-ifs

.1.3.6.1.4.1.1429.77.1.7.2.1.2

saCmWebAccessUserIfLevel

Access levels for web pages.

not-applicable(-1) - This will be displayed if access level can not be determined
for any interface/user. In the case when the various interfaces have different access
levels…

Enumerationr/w

Enumerated Values:

-1	not-applicable
0	off
1	system
2	basic
3	readonly
100	advanced

.1.3.6.1.4.1.1429.77.1.7.2.1.3

saPUFTable

table

.1.3.6.1.4.1.1429.77.1.10.1 · 1 row entry · 9 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk saPUFTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SA-CM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SA-CM-MIB::saPUFTable'

A table of PowerUp Frequencies scanned first.

saPUFEntry row .1.3.6.1.4.1.1429.77.1.10.1.1

A row in the table that specifies a single frequency.

Indexes

saPUFIndex

Column Syntax OID

saPUFIndex

Indicates the instance of this table row.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.1429.77.1.10.1.1.1

saPUFRowStatus

Controls and reflects the status of rows in this table. Rows in this
table may be created by either the create-and-go or create-and-wait
paradigms. There is no restriction on changing values in a row of
this table w…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.1429.77.1.10.1.1.2

saPUFFrequency

Frequency in Hz

Integer32r/w

Constraints:
range: 93000000-999000000

.1.3.6.1.4.1.1429.77.1.10.1.1.3

saPUFAnnex

Annex mode for the frequency

Enumerationr/w

Enumerated Values:

0	annexA
1	annexB

.1.3.6.1.4.1.1429.77.1.10.1.1.4

saPUFScanNow

Setting an index of this object to true(1) causes the modem to immediately
go offline and scan for the frequency stored in saPUFFrequency.x.
The results and timestamp of the scan are stored to non-vol.
After the scan…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.1429.77.1.10.1.1.5

saPUFScanOnNextBoot

Setting an index of this object to set(1) causes the modem to scan for
the frequency stored in saPUFFrequency.x on the next reboot and record the
results to non-vol.
After the reboot and data is recorded, the index of …

Enumerationr/w

Enumerated Values:

0	unset
1	set

.1.3.6.1.4.1.1429.77.1.10.1.1.6

saPUFScanResults

Indicates if RF energy was detected on the last scan.
This value is stored in non-volatile memory.

Enumeration

Enumerated Values:

0	notDetected
1	detected

.1.3.6.1.4.1.1429.77.1.10.1.1.7

saPUFScanTimestamp

Reports the timestamp (YYYYMMDDHHMM) of the last scan.
This value is stored in non-volatile memory.

OctetString

Constraints:
range: 12-12

.1.3.6.1.4.1.1429.77.1.10.1.1.8

saPUFScanResultsType

Indicates the type of RF energy that was detected on the last scan.
This value is stored in non-volatile memory.

Enumeration

Enumerated Values:

0	notDetected
1	qam
2	docsisQam
3	unknown

.1.3.6.1.4.1.1429.77.1.10.1.1.9

saLKFTable

table

.1.3.6.1.4.1.1429.77.1.11.1 · 1 row entry · 2 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk saLKFTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SA-CM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SA-CM-MIB::saLKFTable'

A table of Last Known Frequencies.

saLKFEntry row .1.3.6.1.4.1.1429.77.1.11.1.1

A row in the table that specifies a single frequency.

Indexes

saLKFIndex

Column	Syntax	OID
saLKFIndex Indicates the instance of this table row.	Integer32 Constraints: `range: 1-10`	`.1.3.6.1.4.1.1429.77.1.11.1.1.1`
saLKFFrequency Frequency in Hz	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.1429.77.1.11.1.1.2`

saSoftwareTable

table

.1.3.6.1.4.1.1429.77.1.14.1 · 1 row entry · 3 columns

Open in standard view

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk saSoftwareTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SA-CM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SA-CM-MIB::saSoftwareTable'

A Table of SW features support in the running image

saSoftwareTableEntry row .1.3.6.1.4.1.1429.77.1.14.1.1

A row in the table that specifies a single reset entry.

Indexes

saSoftwareIndex

Column	Syntax	OID
saSoftwareIndex Index for the table.	Integer32 Constraints: `range: 1-128`	`.1.3.6.1.4.1.1429.77.1.14.1.1.1`
saSoftwareBaseVersion Defines the SoC vendor base version for the feature, if any	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.1429.77.1.14.1.1.2`
saSoftwareFeatureName Shows the features present in the software. Also provides Cisco specific compile options used	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.1429.77.1.14.1.1.3`