s5AgInfoNextBootBank
S5-AGENT-MIB ·
.1.3.6.1.4.1.45.1.6.4.2.1.22
Object
scalar
r/w
Integer32
The source of the image to be loaded upon the
next boot of the device.
If a value is set larger than s5AgInfoNumBootBanks,
a badValue error should be returned.
Devices without local image capability or not
supporting this attribute shall return a value of 0.
Context
- MIB
- S5-AGENT-MIB
- OID
.1.3.6.1.4.1.45.1.6.4.2.1.22- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- s5AgentGbl
- Siblings
- 27
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s5AgInfoReBoot Action object to reboot the agent.
The following values can only be read:
other(1).....agent in unknown or other state
running(2)...agent running
The following valu… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.1 |
| s5AgInfoVer The version of the agent in the form
'major.minor.maintenance[letters]'. This
is an alias for the value of the object
s5ChasStoreCntntVer for the RAM of the
module containing the … | scalar | OctetString | .1.3.6.1.4.1.45.1.6.4.2.1.10 |
| s5AgInfoLocStorVer The version of the agent image saved in local
storage such as flash memory in the form
'major.minor.maintenance[letters]'. If not
known or not available, then the value is
a zero … | scalar | OctetString | .1.3.6.1.4.1.45.1.6.4.2.1.11 |
| s5AgInfoNxtBootDfltGwAddr The IP address of the default gateway (router)
for the agent to use after the next boot. (NOTE:
the current default router is the value of object
s5AgInfoCurDfltGwAddr (or ipRoute… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.1.6.4.2.1.12 |
| s5AgInfoCurDfltGwAddr The IP address of the current default gateway
(router). (NOTE: this is an alias for the object
ipRouteNextHop in the row of the table
ipRouteTable which has object ipRouteDest wit… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.1.6.4.2.1.13 |
| s5AgInfoDramUsage An indication of the percentage of DRAM currently
in use by this agent. If this information is not
available the agent shall return -1, otherwise the
percentage of DRAM in use is… | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.4.2.1.14 |
| s5AgInfoLoadProtocolNxtBoot The transport protocol(s) over which the
agent is to use to load the configuration
information and the agent image at the
next boot of the agent. The following
value is read-o… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.15 |
| s5AgInfoLoadProtocolLast The transport protocol over which the agent image
and configuration information were last loaded. The
following values are read-only:
reserved(1)...reserved
ip(2).........got… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.16 |
| s5AgInfoSlotScope This object contains information about all
the slots an agent can manage. The value is encoded
in an octet string. One byte has information about 8
slots. If a bit is set then ag… | scalar | OctetString | .1.3.6.1.4.1.45.1.6.4.2.1.17 |
| s5AgInfoImgType Indicates the type of agent image. This object is meant
to distinguish between agents having the same version
number running on the same hardware, but with dissimilar
functionalit… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.18 |
| s5AgInfoScheduleBootTime The time, measured in minutes, remaining until the
action(s) set by s5AgInfoReBoot will be performed.
This value must be set in the same set request as
the value of s5AgInfoReBoot… | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.4.2.1.19 |
| s5AgInfoWriteCfg Action object to cause current configuration
settings to be written to local nonvolatile
storage. The following values can only be read:
other(1)...some unknown or other state
… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.2 |
| s5AgInfoScheduleBootCancel Cancel a scheduled s5AgInfoReboot action.
The following value is read-only:
other(1)...not applicable or some other case
This is always the value that return when
read… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.20 |
| s5AgInfoNumBootBanks The number of local storage locations (or flash
memory banks) available on this device for
operational code images.
Devices without local image capability or not
suppor… | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.4.2.1.21 |
| s5AgInfoDstLoadBank The local storage bank where the next system image
image is downloaded to.
Devices without local image capability or not
supporting this attribute shall return a value… | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.4.2.1.23 |
| s5AgInfoFileAction This object is used to copy a config file or an image file.
Typically, the copy is to/from a TFTP server, though other
types of sources/destinations are possible.
In re… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.24 |
| s5AgInfoFileStatus This object is used to get the status of the latest action as
shown by s5AgInfoFileAction. The values that can be read are:
other(1) ......... if no action taken si… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.25 |
| s5AgInfoStackBootpMACUsage This object is used to get/set which MAC address is used
by a stackable system when performing BOOTP requests during
bootup. A value of useBaseUnitMACAddress(2) indicates that
th… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.26 |
| s5AgInfoImgDownloadStatus This object indicates the current operational status of the software
image download process. | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.27 |
| s5AgInfoImgDownloadPercentComplete This object indicates the percentage complete of the current phase
of the software image download process. | scalar | Unsigned32 | .1.3.6.1.4.1.45.1.6.4.2.1.28 |
| s5AgInfoMgmtProtocolNxtBoot The transport protocol(s) to use after
the next boot of the agent. The following
value is read-only:
other(1)....unknown or some other protocol
The following value is… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.3 |
| s5AgInfoMgmtProtocolCur The current transport protocol(s) that are
being supported by the agent. The following
value is read-only:
other(1)....unknown or some other protocol
The following va… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.4 |
| s5AgInfoBootMode The source for initial protocol configuration
information at next boot. For IP, a setting of
net(3), netWhenNeeded(4), or netOrLastAddress(5)
means that BOOTP will be used to get … | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.5 |
| s5AgInfoCfgLoadMode The source from which to load configuration
information at next boot. The following value
is read-only:
other(1)...not applicable or some other case
The following val… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.6 |
| s5AgInfoImgLoadMode The source from which to load the agent image
at next boot. The following value is read-only:
other(1)...not applicable or some other case
The following values are re… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.7 |
| s5AgInfoImgSaveMode Indicates what to do with the image (when
loaded from the network) on the next boot.
The following value can only be read:
notAvail(1)...the save operation is not
… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.8 |
| s5AgInfoImgSaveStatus Indicates what happened to the image file
on the last boot. The following values
are returned:
notAvail(1).....the save operation is not
available
noSave(2… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.4.2.1.9 |