S5-AGENT-MIB Table View

A table that provides additional information
about the agent's interfaces. The number of
entries in the table is determined by the
number of interfaces on the agent.

s5AgMyIfEntry row .1.3.6.1.4.1.45.1.6.4.2.2.1

A row in the table of additional information
about the agent's interfaces. Entries can not
be created or deleted via SNMP requests.

Indexes

s5AgMyIfIndx

Column	Syntax	OID
s5AgMyIfIndx The index of the interface. This has the same value as ifIndex for the interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.45.1.6.4.2.2.1.1
s5AgMyIfNxtBootIpAddr For the next boot, the IP address of the the interface. If not used, then the value is 0.0.0.0. (NOTE: the current IP address for the interface is found in table ipAddrTable and in table s5AgOthIfTable.)	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.45.1.6.4.2.2.1.2
s5AgMyIfNxtBootNetMask For the next boot, the subnet mask for the interface. If not used, then the value is 0.0.0.0. (NOTE: the current subnet mask for the interface is found in table ipAddrTable.)	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.45.1.6.4.2.2.1.3
s5AgMyIfCfgFname Name of the configuration file currently associated with the interface. When not used, the value is a zero length string.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.45.1.6.4.2.2.1.4
s5AgMyIfLdSvrAddr The IP address of the load server for the configuration file and/or the image file. If not used, then the value is 0.0.0.0	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.45.1.6.4.2.2.1.5
s5AgMyIfImgFname Name of the image file(s) currently associated with the interface. Some agents in special situations may support a value which contains multiple file names instead of a single file name. Multiple names are specified as …	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.45.1.6.4.2.2.1.6
s5AgMyIfValidFlag Indicates if the configuration and/or image file(s) were downloaded from this interface and if the file names have not been changed. The following values can be read: valid(1).....configuration and/or image file(s) …	Enumeration Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.45.1.6.4.2.2.1.7
s5AgMyIfNxtBootIpxAddr For the next boot, the IPX address of the the interface. If the IPX protocol is not used, then the value is 00000000:000000000000. NOTE: The current IPX address for the interface is found in table…	S5-TCS-MIBIpxAddress Type Constraints: range: 10	.1.3.6.1.4.1.45.1.6.4.2.2.1.8
s5AgMyIfBootRouterAddr The IP address of the boot router for the configuration file and/or the image file. If not used, then the value is 0.0.0.0	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.45.1.6.4.2.2.1.9
s5AgMyIfMacAddr The MAC address of the interface. The value is 00:00:00:00:00:00 if there is no interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.45.1.6.4.2.2.1.10

A table that provides information about
each interface for each agent in the chassis.
The number of entries in the table is determined
by the number of agents in the chassis and their
configuration.

s5AgOthIfEntry row .1.3.6.1.4.1.45.1.6.4.2.3.1

A row in the table of information about interface
information for all agents in the chassis. Entries
can not be created or deleted via SNMP requests.

Indexes

s5AgOthIfGrpIndx s5AgOthIfComIndx s5AgOthIfIndx

Column	Syntax	OID
s5AgOthIfGrpIndx The index of the group containing the component containing the agent.	Integer32 Constraints: range: 1-32767	.1.3.6.1.4.1.45.1.6.4.2.3.1.1
s5AgOthIfComIndx The index of the component in the group containing the agent.	Integer32 Constraints: range: 1-32767	.1.3.6.1.4.1.45.1.6.4.2.3.1.2
s5AgOthIfIndx The index of the interface. This is the same value as ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.45.1.6.4.2.3.1.3
s5AgOthIfIpAddr The IP address of the interface. If not used, then the value is 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.45.1.6.4.2.3.1.4
s5AgOthIfIpxAddr The IPX address of the interface. If the IPX protocol is not used, then the value is 00000000:000000000000.	S5-TCS-MIBIpxAddressr/w Type Constraints: range: 10	.1.3.6.1.4.1.45.1.6.4.2.3.1.5

A table of control information and statistics
for the data collection (promiscuous data
capturing) per source of detection.

s5AgDataCollectEntry row .1.3.6.1.4.1.45.1.6.4.2.7.1

A row in the data collection table.
Entries can not be created or deleted
via SNMP.

Indexes

s5AgDataCollectIfIndex

Column	Syntax	OID
s5AgDataCollectIfIndex An integer value representing the source that collects data from the network. A value greater than zero is the index of the agent's interface on the NMM. This is the same value as ifIndex for the interface. A value of …	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.45.1.6.4.2.7.1.1
s5AgDataCollectSnTimeStamp The value of sysUpTime at the last time a node was added or deleted from the Show Node table.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.1.6.4.2.7.1.2
s5AgDataCollectNetworkAddrStatus A switch to enable or disable the collecting of network layer addresses for the network address mapping table (s5CmNetAddrTable ). The following value is read-only: alwaysOff(1)..data source is not capable of col…	Enumerationr/w Enumerated Values: 1 alwaysOff 2 on 3 off	.1.3.6.1.4.1.45.1.6.4.2.7.1.3

Agent Trap filter configuration table.

s5AgTrapFilterEntry row .1.3.6.1.4.1.45.1.6.4.2.11.1

A list of trap filter entries that determine the
filtering of traps. For example, an instance of the
s5AgtTrapFilterStatus will be named s5AgTrapFilterStatus.8

Indexes

s5AgTrapFilterIndex

Column	Syntax	OID
s5AgTrapFilterIndex An index that uniquely identifies an entry in the s5AgTrapFilterTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.45.1.6.4.2.11.1.1
s5AgTrapFilterTrapOID The OID of the trap. This variable is requried for row creation.	ObjectIdentifierr/w	.1.3.6.1.4.1.45.1.6.4.2.11.1.2
s5AgTrapFilterTrapInitiator1 A value that determines the first condition for filtering a trap.This entry is the value of the first varbind for a particular trap in most cases. We need to specify every initiator that represents the…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.6.4.2.11.1.3
s5AgTrapFilterTrapInitiator2 A value that determines the second condition for filtering a trap. This entry is the value of the second varbind for most traps. If the value of this initiator is 0 (wildcard or don't care), it means that it can rep…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.6.4.2.11.1.4
s5AgTrapFilterTrapInitiator3 A value that determines the third condition for filtering a trap. This entry is the value of the third varbind for most traps. If the value of this initiator is 0(wildcard or don't care), it means that it can repres…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.6.4.2.11.1.5
s5AgTrapFilterStatus Indicates whether this trap is enabled or not. enabled(1) indicates that if this type of event occurs, a trap that is generated will be queued for transmit. disabled(2) indicates that if this trap if generated, it w…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.45.1.6.4.2.11.1.6
s5AgTrapFilterDelayTime The time delay period required to be met, between each consecutive occurences of this event. Traps recieved within this period will be dropped.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.1.6.4.2.11.1.7
s5AgTrapEntryStatus A manager is restricted to change the state of an entry base on the following table: create under To: valid Request Creation invalid From: valid OK …	Enumerationr/w Enumerated Values: 1 valid 2 createRequest 3 underCreation 4 invalid	.1.3.6.1.4.1.45.1.6.4.2.11.1.8

A table of managers which to send traps.

s5AgTrpRcvrEntry row .1.3.6.1.4.1.45.1.6.4.3.4.1

A row in the trap receiver table.
The column s5AgTrpRcvrStatus is used to create
and delete rows in the table. Creation requires
a SET PDU with objects s5AgTrpRcvrStatus,
s5AgTrpRcvrAddrType, s5AgTrpRcvrNetAddr,
and s5A…

Indexes

s5AgTrpRcvrIndx

Column	Syntax	OID
s5AgTrpRcvrIndx The index of the row in the table.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.45.1.6.4.3.4.1.1
s5AgTrpRcvrStatus This object is used to create and delete rows in the table and control if they are used. The values that can be written are: valid(2)....makes an existing row valid - can only be writte…	Enumerationr/w Enumerated Values: 1 other 2 valid 3 ignore 4 delete 5 create	.1.3.6.1.4.1.45.1.6.4.3.4.1.2
s5AgTrpRcvrAddrType The type of address that is stored in the object s5AgTrpRcvrNetAddr. The value is: ip(1)....IP address ipx(2)...IPX address. Note: When changing the value of this object with an SNMP SET req…	Enumerationr/w Enumerated Values: 1 ip 2 ipx	.1.3.6.1.4.1.45.1.6.4.3.4.1.3
s5AgTrpRcvrNetAddr The network address (in network order) for SNMP manager that is to receive the trap.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.45.1.6.4.3.4.1.4
s5AgTrpRcvrComm Community string to use.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.1.6.4.3.4.1.5
s5AgTrpRcvrAgeTime The time interval used to age entries out of the trap receiver table. The default value if not specified will be 0, or infinite, never to be aged out.	S5-TCS-MIBTimeIntervalSecr/w	.1.3.6.1.4.1.45.1.6.4.3.4.1.6

Table describing a custom banner to be displayed to users upon 
the establishment of a connection to a Baystack device. 
The banner can be upto 15 lines of text with each line a maximum 
of 80 characters. A line may only contain ASCII printable characters.

s5AgCustomBannerEntry row .1.3.6.1.4.1.45.1.6.4.5.2.1

An entry describing one line of a 15-line banner.

Indexes

s5AgCustomBannerType s5AgCustomBannerId

Column	Syntax	OID
s5AgCustomBannerType Identifies the banner type. The table can store 2 separate banners, one for use in switch/stand-alone mode (with a type of switch(1)), and one for use in stack mode (with a type of stack(2)). Note that a non-stackable…	Enumeration Enumerated Values: 1 switch 2 stack	.1.3.6.1.4.1.45.1.6.4.5.2.1.1
s5AgCustomBannerId Identifies the line of text within a custom banner.	Integer32 Constraints: range: 1-19	.1.3.6.1.4.1.45.1.6.4.5.2.1.2
s5AgCustomBannerLine One line of a fifteen line banner. If the line contains non-printable ASCII characters then the string will be rejected and an error response returned.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.45.1.6.4.5.2.1.3

This table contains an entry for each available configuration 
boot block.

s5AgBootCfgBlocksEntry row .1.3.6.1.4.1.45.1.6.4.10.2.1

An entry describing one configuration boot block.

Indexes

s5AgBootCfgBlocksIndex

Column	Syntax	OID
s5AgBootCfgBlocksIndex Index of the table, this is the block number.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.45.1.6.4.10.2.1.1
s5AgBootCfgBlocksName The name of the configuration boot block.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.45.1.6.4.10.2.1.2
s5AgBootCfgBlocksTime The time when the configuration block was last saved. Note that if configuration data has never been saved to this block, the value will contain all 0 value bytes. If the actual date and time is unavailable when the blo…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.45.1.6.4.10.2.1.3
s5AgBootCfgBlocksValid This object indicates whether the configuration block contains a valid configuration.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.1.6.4.10.2.1.4

A table of paths to ASCII configuration script files.

s5AgAsciiConfigScriptEntry row .1.3.6.1.4.1.45.1.6.4.11.1.1

A row in the ASCII configuration file paths table.

Indexes

s5AgAsciiConfigScriptIndex

Column	Syntax	OID
s5AgAsciiConfigScriptIndex The index of an ASCII confiuration script file path.	Integer32 Constraints: range: 1-127	.1.3.6.1.4.1.45.1.6.4.11.1.1.1
s5AgAsciiConfigScriptBootPriority A value between 1-127 indicates the priority with which the entry will be used at bootup. Entries with lower values will be used before entries with higher values. If two entries have equal priority values, the entry w…	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.45.1.6.4.11.1.1.2
s5AgAsciiConfigScriptSource The source of the script. This is an ASCII string similar to a URL, and must be in one of the following formats: - 'bootp://' - the source of the script will be determined using bootp. - 'usb://<fi…	OctetStringr/w Constraints: range: 0-327	.1.3.6.1.4.1.45.1.6.4.11.1.1.3
s5AgAsciiConfigScriptManual This object is used to manually download and run a script, or to upload the current configuration. Setting it to download(2) will force the script to be loaded from the source specified in the corresponding instance of…	Enumerationr/w Enumerated Values: 1 other 2 download 3 upload 4 uploadVerbose	.1.3.6.1.4.1.45.1.6.4.11.1.1.4
s5AgAsciiConfigScriptOperStatus This object indicates the current operational status of this entry. The value will reflect the status of the last operation performed using a particular entry. If an entry has never been used, the value will be other(1…	Enumeration Enumerated Values: 1 other 2 autoDownloadPassed 3 autoDownloadInProgress 4 autoDownloadFailed 5 manualDownloadPassed 6 manualDownloadInProgress 7 manualDownloadFailed 8 manualUploadPassed 9 manualUploadInProgress 10 manualUploadFailed 11 manualUploadVerbosePassed 12 manualUploadVerboseInProgress 13 manualUploadVerboseFailed	.1.3.6.1.4.1.45.1.6.4.11.1.1.5
s5AgAsciiConfigScriptLastStatusChange The value of snmpEngineTime at the time of the last status change of this entry, i.e., the last time the value of the corresponding instance of s5AgAsciiConfigScriptOperStatus changed. If that value is other(1), then t…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.45.1.6.4.11.1.1.6
s5AgAsciiConfigScriptUploadApplications This objects is used to specify the set of applications to be included an an ASCII configuration file when it is uploaded.	Bitsr/w Enumerated Values: 0 ieee802dot1ab 1 aaur 2 adac 3 arpInspection 4 assetId 5 aur 6 banner 7 brouter 8 cops 9 core 10 defaultCmdInterface 11 dhcpRelay 12 dhcpSnooping 13 eap 14 esu 15 interface 16 ip 17 ipSourceGuard 18 ipfix 19 ipmc 20 ipmgr 21 ipv6 22 l3 23 l3Protocols 24 lacp 25 logging 26 macSecurity 27 mlt 28 pim 29 poe 30 portMirroring 31 pvst 32 qos 33 rateLimit 34 rmon 35 rtc 36 slpp 37 snmp 38 smlt 39 nsna 40 ssh 41 ssl 42 stack 43 stkmon 44 stp 45 vlacp 46 vlan 47 energySaver 48 unicastStormControl 49 wireless 50 sshc 51 dhcpServer 52 fcoe 53 cfm 54 slamon 55 spbm 56 lst 57 sflow 58 ipv6-mld 59 ipv6-fhs 60 stormControl 61 aaa 62 fabric-attach 63 ipv6-ripng 64 radius 65 tacacs 66 mvr 67 vrrpv3 68 macsec 69 ipsec 70 ike 71 digicert 72 apptel	.1.3.6.1.4.1.45.1.6.4.11.1.1.7

A table of information about software licenses.

s5AgentLicenseEntry row .1.3.6.1.4.1.45.1.6.4.12.1.1

Information about a software license.

Indexes

s5AgentLicenseIndex

Column	Syntax	OID
s5AgentLicenseIndex The index of license file which now can vary between 0 and 9, a total of 10 licenses.	Integer32 Constraints: range: 0-9	.1.3.6.1.4.1.45.1.6.4.12.1.1.1
s5AgentLicenseType License type/level.	Enumeration Enumerated Values: 1 demo 2 advanced 3 premier 4 stacking 5 macsec 6 advanced-macsec	.1.3.6.1.4.1.45.1.6.4.12.1.1.2
s5AgentLicenseVersion License data version.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.45.1.6.4.12.1.1.3
s5AgentLicenseMd5Key MD5 Digest of encryption key.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.45.1.6.4.12.1.1.4
s5AgentLicenseMd5File MD5 Digest of entire license file.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.45.1.6.4.12.1.1.5
s5AgentLicenseTimeBase Time field used for time limited licenses.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.45.1.6.4.12.1.1.6
s5AgentLicenseTimeModify Time field used for time limited licenses.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.45.1.6.4.12.1.1.7
s5AgentLicenseTimeExpiration Time field used for time limited licenses. Shows the expiring date of the current license.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.45.1.6.4.12.1.1.8
s5AgentLicenseNumUniqueIds Number of unique IDs(MAC addresses) associated with license.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.45.1.6.4.12.1.1.9
s5AgentLicenseFlags Flags to indicate license type/functionality.	Bits Enumerated Values: 0 singleSerial 1 site 2 expirationEnabled 3 emergency 4 compressed 5 memoAttached	.1.3.6.1.4.1.45.1.6.4.12.1.1.10
s5AgentLicenseMemo Memo field to allow text message to be added.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.45.1.6.4.12.1.1.11
s5AgentLicenseStatus This object specifies the status of a license. At retrieval, the status is set to active(1). When setting the remove(2) value, the object deletes the specified license.	Enumerationr/w Enumerated Values: 1 active 2 remove	.1.3.6.1.4.1.45.1.6.4.12.1.1.12

A table of information about agent scripts.

s5AgentScriptEntry row .1.3.6.1.4.1.45.1.6.4.13.1.1

A row in the agent script table.

Indexes

s5AgentScriptIndex

Column	Syntax	OID
s5AgentScriptIndex The index of an agent script.	Enumeration Enumerated Values: 1 ip-office 2 lldp 3 adac 4 voice	.1.3.6.1.4.1.45.1.6.4.13.1.1.1
s5AgentScriptParameters This object is used to specify the agent script parameters, as strings separated by ';' character. If the string for a parameter is left empty (e.g '42;;255.255.0.0;', ';182.168.1.1;'), the parameter is set to its defa…	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.45.1.6.4.13.1.1.2
s5AgentScriptStatus The status of an agent script.	Enumeration Enumerated Values: 1 passed 2 failed 3 inProgress	.1.3.6.1.4.1.45.1.6.4.13.1.1.3
s5AgentScriptRun This object runs a script. When setting default(1) value, the script runs its default configuration. When setting the verbose(2) value, the script runs the parameters provided with s5AgentScriptParameters. At retrieval,…	Enumerationr/w Enumerated Values: 1 default 2 verbose	.1.3.6.1.4.1.45.1.6.4.13.1.1.4