frDlcmiMaxSupportedVCs
RFC1315-MIB ·
.1.3.6.1.2.1.10.32.1.1.9
Object
column
mandatory
r/w
Integer32
The maximum number of Virtual Circuits allowed
for this interface. Usually dictated by the
Frame Relay network.
In response to a SET, if a value less than zero
or higher than the agent's maximal capability
is configured, the agent should respond bad-
Value
Context
- MIB
- RFC1315-MIB
- OID
.1.3.6.1.2.1.10.32.1.1.9- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- frDlcmiEntry
- Table
- frDlcmiTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1023
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frDlcmiIfIndex mandatory The ifIndex value of the corresponding ifEn-
try. | column | Integer32 | .1.3.6.1.2.1.10.32.1.1.1 |
| frDlcmiMulticast mandatory This indicates whether the Frame Relay inter-
face is using a multicast service. | column | Enumeration | .1.3.6.1.2.1.10.32.1.1.10 |
| frDlcmiState mandatory This variable states which Data Link Connec-
tion Management scheme is active (and by impli-
cation, what DLCI it uses) on the Frame Relay
interface. | column | Enumeration | .1.3.6.1.2.1.10.32.1.1.2 |
| frDlcmiAddress mandatory This variable states which address format is
in use on the Frame Relay interface. | column | Enumeration | .1.3.6.1.2.1.10.32.1.1.3 |
| frDlcmiAddressLen mandatory This variable states which address length in
octets. In the case of Q922 format, the length
indicates the entire length of the address in-
cluding the control portion. | column | Enumeration | .1.3.6.1.2.1.10.32.1.1.4 |
| frDlcmiDceIdleInterval mandatory This is the number of seconds within a
status enquiry messages should be received. | column | Integer32 | .1.3.6.1.2.1.10.32.1.1.42 |
| frDlcmiDceErrorThreshold mandatory This is the maximum number of unsent
Status Enquiries the equipment shall accept be-
fore declaring the interface down. | column | Integer32 | .1.3.6.1.2.1.10.32.1.1.43 |
| frDlcmiDceMonitoredEvents mandatory This is the number of status polling intervals
over which the error threshold is counted. For
example, if within 'MonitoredEvents' number of
events the station receives 'Erro… | column | Integer32 | .1.3.6.1.2.1.10.32.1.1.44 |
| frDlcmiMode mandatory This indicates the mode of the interface. dte(1) does
status enquiry polling, dce(2) does status answering.
nni(3) is bidirectional use of both dte and dce. | column | Enumeration | .1.3.6.1.2.1.10.32.1.1.45 |
| frDlcmiDefaultRouteIfIndex mandatory This is the default route interface index when a new
PVC is established by means of line management. | column | Integer32 | .1.3.6.1.2.1.10.32.1.1.46 |
| frDlcmiPollingInterval mandatory This is the number of seconds between succes-
sive status enquiry messages. | column | Integer32 | .1.3.6.1.2.1.10.32.1.1.5 |
| frDlcmiFullEnquiryInterval mandatory Number of status enquiry intervals that pass
before issuance of a full status enquiry mes-
sage. | column | Integer32 | .1.3.6.1.2.1.10.32.1.1.6 |
| frDlcmiErrorThreshold mandatory This is the maximum number of unanswered
Status Enquiries the equipment shall accept be-
fore declaring the interface down. | column | Integer32 | .1.3.6.1.2.1.10.32.1.1.7 |
| frDlcmiMonitoredEvents mandatory This is the number of status polling intervals
over which the error threshold is counted. For
example, if within 'MonitoredEvents' number of
events the station receives 'Erro… | column | Integer32 | .1.3.6.1.2.1.10.32.1.1.8 |