frCircuitRouteType
RFC1315-MIB ·
.1.3.6.1.2.1.10.32.2.1.42
Object
column
mandatory
Enumeration
Type of routing entry. This field is intended for informational purpose only.
Context
- MIB
- RFC1315-MIB
- OID
.1.3.6.1.2.1.10.32.2.1.42- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- frCircuitEntry
- Table
- frCircuitTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | local |
2 | switch |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frCircuitIfIndex mandatory The ifIndex Value of the ifEntry this virtual
circuit is layered onto. | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.1 |
| frCircuitCreationTime mandatory The value of sysUpTime when the virtual cir-
cuit was created, whether by the Data Link Con-
nection Management Interface or by a SetRe-
quest. | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.10.32.2.1.10 |
| frCircuitLastTimeChange mandatory The value of sysUpTime when last there was a
change in the virtual circuit state | column | RFC1155-SMITimeTicks | .1.3.6.1.2.1.10.32.2.1.11 |
| frCircuitCommittedBurst mandatory This variable indicates the maximum amount of
data, in bits, that the network agrees to
transfer under normal conditions, during the
measurement interval. | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.12 |
| frCircuitExcessBurst mandatory This variable indicates the maximum amount of
uncommitted data bits that the network will at-
tempt to deliver over the measurement interval.
By default, if not co… | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.13 |
| frCircuitThroughput mandatory Throughput is the average number of 'Frame Re-
lay Information Field' bits transferred per
second across a user network interface in one
direction, measured over the measure… | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.14 |
| frCircuitDlci mandatory The Data Link Connection Identifier for this
virtual circuit. | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.2 |
| frCircuitState mandatory Indicates whether the particular virtual cir-
cuit is operational. In the absence of a Data
Link Connection Management Interface, virtual
circuit entries (rows) may be crea… | column | Enumeration | .1.3.6.1.2.1.10.32.2.1.3 |
| frCircuitReceivedFECNs mandatory Number of frames received from the network in-
dicating forward congestion since the virtual
circuit was created. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.32.2.1.4 |
| frCircuitRouteIfIndex mandatory The destination IfIndex is a pointer to either a
second frame relay interface (frame relay switching)
or to a frame relay virtual interface (multiprotocol
routing). | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.43 |
| frCircuitRouteDlci mandatory The destination DLCI. When the circuit is used for
switching, all packets are sent using this DLCI.
This field is void for multiprotocol routing. | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.44 |
| frCircuitReceivedBECNs mandatory Number of frames received from the network in-
dicating backward congestion since the virtual
circuit was created. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.32.2.1.5 |
| frCircuitSentFrames mandatory The number of frames sent from this virtual
circuit since it was created. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.32.2.1.6 |
| frCircuitSentOctets mandatory The number of octets sent from this virtual
circuit since it was created. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.32.2.1.7 |
| frCircuitReceivedFrames mandatory Number of frames received over this virtual
circuit since it was created. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.32.2.1.8 |
| frCircuitReceivedOctets mandatory Number of octets received over this virtual
circuit since it was created. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.32.2.1.9 |