frCircuitExcessBurst

RFC1315-MIB · .1.3.6.1.2.1.10.32.2.1.13
MIB view Table view

Object

column mandatory r/w Integer32 
This variable indicates the maximum amount  of
uncommitted data bits that the network will at-
tempt to deliver over the measurement interval.
              
By default, if not configured when creating the
entry, the Excess Information Burst Size is set
to the value of ifSpeed.

Context

MIB
RFC1315-MIB
OID
.1.3.6.1.2.1.10.32.2.1.13
Type
column
Access
readwrite
Status
mandatory
Parent
frCircuitEntry
Table
frCircuitTable
Siblings
16

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
frCircuitIfIndex mandatory
The ifIndex Value of the ifEntry this virtual circuit is layered onto.
columnInteger32.1.3.6.1.2.1.10.32.2.1.1
frCircuitCreationTime mandatory
The value of sysUpTime when the virtual cir- cuit was created, whether by the Data Link Con- nection Management Interface or by a SetRe- quest.
columnRFC1155-SMITimeTicks.1.3.6.1.2.1.10.32.2.1.10
frCircuitLastTimeChange mandatory
The value of sysUpTime when last there was a change in the virtual circuit state
columnRFC1155-SMITimeTicks.1.3.6.1.2.1.10.32.2.1.11
frCircuitCommittedBurst mandatory
This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
columnInteger32.1.3.6.1.2.1.10.32.2.1.12
frCircuitThroughput mandatory
Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured over the measure…
columnInteger32.1.3.6.1.2.1.10.32.2.1.14
frCircuitDlci mandatory
The Data Link Connection Identifier for this virtual circuit.
columnInteger32.1.3.6.1.2.1.10.32.2.1.2
frCircuitState mandatory
Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be crea…
columnEnumeration.1.3.6.1.2.1.10.32.2.1.3
frCircuitReceivedFECNs mandatory
Number of frames received from the network in- dicating forward congestion since the virtual circuit was created.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.32.2.1.4
frCircuitRouteType mandatory
Type of routing entry. This field is intended for informational purpose only.
columnEnumeration.1.3.6.1.2.1.10.32.2.1.42
frCircuitRouteIfIndex mandatory
The destination IfIndex is a pointer to either a second frame relay interface (frame relay switching) or to a frame relay virtual interface (multiprotocol routing).
columnInteger32.1.3.6.1.2.1.10.32.2.1.43
frCircuitRouteDlci mandatory
The destination DLCI. When the circuit is used for switching, all packets are sent using this DLCI. This field is void for multiprotocol routing.
columnInteger32.1.3.6.1.2.1.10.32.2.1.44
frCircuitReceivedBECNs mandatory
Number of frames received from the network in- dicating backward congestion since the virtual circuit was created.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.32.2.1.5
frCircuitSentFrames mandatory
The number of frames sent from this virtual circuit since it was created.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.32.2.1.6
frCircuitSentOctets mandatory
The number of octets sent from this virtual circuit since it was created.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.32.2.1.7
frCircuitReceivedFrames mandatory
Number of frames received over this virtual circuit since it was created.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.32.2.1.8
frCircuitReceivedOctets mandatory
Number of octets received over this virtual circuit since it was created.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.32.2.1.9