rdnLoadBalBasicRuleEnable
RDN-DLB-MIB ·
.1.3.6.1.4.1.4981.8.1.1.2
Object
column
r/w
Enumeration
When using this rule set, the load balancing algorithm is based on upstream and downstream utilization by the values upstream(1) and downstream(2) respectively. Additionally, a Load Balancing groups interval can be defined by value interval(3). Upstream Load Balancing during modem registration can be enabled by value registration(4). Load Balancing after a resource failure due to a DSX from a CPE can be enabled by value rem-dsx(5). Load balancing triggered by a Spectrum Management bit rate change can be enabled by value spec-trig(6). Downstream Load Balancing during modem registration can be enabled by value ds-reg(7). Upstream Load Balancing with Bonding Groups during modem registration can be enabled by value us-reg-bonding(8). Downstream Load Balancing with Bonding Groups during modem registration can be enabled by value ds-reg-bonding(9). The load balancing utilization thresholds are defined by the objects rdnLoadBalBasicRuleMinThres, rdnLoadBalBasicRuleDeltaThres and rdnLoadBalBasicRuleStopThres objects if this object value is set to upstream(1) or downstream(2). The modem count threshold is defined by the object rdnLoadBalBasicRuleModemCountThres if this object value is set to registration(4), ds-reg(7), us-reg-bonding(8), or ds-reg-bonding(9).
Context
- MIB
- RDN-DLB-MIB
- OID
.1.3.6.1.4.1.4981.8.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rdnLoadBalBasicRuleEntry
- Table
- rdnLoadBalBasicRuleTable
- Siblings
- 6
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | upstream |
2 | downstream |
3 | interval |
4 | registration |
5 | rem-dsx |
6 | spec-trig |
7 | ds-reg |
8 | us-reg-bonding |
9 | ds-reg-bonding |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rdnLoadBalBasicRuleId An index uniquely identifying an entry
in the rdnLoadBalBasicRuleTable. | column | Unsigned32 | .1.3.6.1.4.1.4981.8.1.1.1 |
| rdnLoadBalBasicRuleMinThres If object rdnLoadBalBasicRuleEnable is upstream(1) or downstream(2), the minimum percentage
of utilization that a channel must have to start load balancing is defined by this valu… | column | Unsigned32 | .1.3.6.1.4.1.4981.8.1.1.3 |
| rdnLoadBalBasicRuleDeltaThres If object rdnLoadBalBasicRuleEnable is upstream(1) or downstream(2), the delta percentage
of utilization between two load balancing group channels that must exist to start load
… | column | Unsigned32 | .1.3.6.1.4.1.4981.8.1.1.4 |
| rdnLoadBalBasicRuleStopThres If object rdnLoadBalBasicRuleEnable is upstream(1) or downstream(2), the delta percentage
of utilization between two load balancing group channels that should be met to stop load … | column | Unsigned32 | .1.3.6.1.4.1.4981.8.1.1.5 |
| rdnLoadBalBasicRuleRowStatus This object is to create or delete rows in this table. There is no restriction for
changing this row status or object's values in this table at any time. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4981.8.1.1.7 |
| rdnLoadBalBasicRuleModemCountThres If object rdnLoadBalBasicRuleEnable is registration(4), the modem count threshold
represents the maximum allowed difference in modem count between the modem's initial
upstream cha… | column | Unsigned32 | .1.3.6.1.4.1.4981.8.1.1.8 |