RDN-DLB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
7
.1.3.6.1.4.1.4981.8.1 · 1 row entry · 7 columns
Load Balance Basic Rule Table.
rdnLoadBalBasicRuleEntry entry .1.3.6.1.4.1.4981.8.1.1
Load Balance Basic Rule Table entry.
Indexes
rdnLoadBalBasicRuleId
Column Syntax OID
rdnLoadBalBasicRuleId
An index uniquely identifying an entry
in the rdnLoadBalBasicRuleTable.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.4981.8.1.1.1
rdnLoadBalBasicRuleEnable
When using this rule set, the load balancing algorithm is based on upstream and downstream
utilization by the values upstream(1) and downstream(2) respectively. Additionally, a Load
Balancing groups interval can be defi…
Enumerationr/w
Enumerated Values:
1upstream
2downstream
3interval
4registration
5rem-dsx
6spec-trig
7ds-reg
8us-reg-bonding
9ds-reg-bonding
.1.3.6.1.4.1.4981.8.1.1.2
rdnLoadBalBasicRuleMinThres
If object rdnLoadBalBasicRuleEnable is upstream(1) or downstream(2), the minimum percentage
of utilization that a channel must have to start load balancing is defined by this value.
Otherwise, this object has no meanin…
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.4981.8.1.1.3
rdnLoadBalBasicRuleDeltaThres
If object rdnLoadBalBasicRuleEnable is upstream(1) or downstream(2), the delta percentage
of utilization between two load balancing group channels that must exist to start load
balancing is defined by this value. Othe…
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.4981.8.1.1.4
rdnLoadBalBasicRuleStopThres
If object rdnLoadBalBasicRuleEnable is upstream(1) or downstream(2), the delta percentage
of utilization between two load balancing group channels that should be met to stop load
balancing is defined by this value. Oth…
Unsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.4981.8.1.1.5
rdnLoadBalBasicRuleRowStatus
This object is to create or delete rows in this table. There is no restriction for
changing this row status or object's values in this table at any time.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.4981.8.1.1.7
rdnLoadBalBasicRuleModemCountThres
If object rdnLoadBalBasicRuleEnable is registration(4), the modem count threshold
represents the maximum allowed difference in modem count between the modem's initial
upstream channel and the least loaded upstream chann…
Unsigned32r/w
Constraints:
range: 1-50
.1.3.6.1.4.1.4981.8.1.1.8