rcPlugOptModVendorName
RC-POM-MIB ·
.1.3.6.1.4.1.2272.1.71.1.1.6
Object
column
OctetString
The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. The vendor name shall be the full name of the corporation, a commonly accepted abbreviation of the name, the SCSI company code, or the stock exchange code for the corporation.
Context
- MIB
- RC-POM-MIB
- OID
.1.3.6.1.4.1.2272.1.71.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcPlugOptModEntry
- Table
- rcPlugOptModTable
- Siblings
- 104
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-17
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcPlugOptModPortIndex An index value that uniquely identifies a port on a
blade or line-card. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.71.1.1.1 |
| rcPlugOptModVendorDateCode The date code is an 8-byte field that contains the
vendor's date code in ASCII. This field is
mandatory and takes the form: YYMMDDLC where
YY is the 2 low order digits of the year… | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.10 |
| rcPlugOptModQSFPRx3DdmLastGasp This value represents the last gasp of Rx dB from low alarm
on QSPF channel 3. Host updates it every 48 hours. Update only
if Rx_LOS is not asserted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.100 |
| rcPlugOptModQSFPTx4DdmInitial This value represents the Tx dB from low alarm on QSPF
channel 4. Host sets it once only, after the first 48 consecutive
hours of operation. Update only if Tx_disable is not act… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.101 |
| rcPlugOptModQSFPTx4DdmLastGasp This value represents the last gasp of Tx dB from low
alarm on QSPF channel 4. Host updates it every 48 hours.
Update only if Tx_disable is not active. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.102 |
| rcPlugOptModQSFPRx4DdmInitial This value represents the Rx dB from low alarm on QSPF
channel 4. Host sets it after the first 48 consecutive hours
of operation since PMD power cycle. Update only if Rx_LOS
is… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.103 |
| rcPlugOptModQSFPRx4DdmLastGasp This value represents the last gasp of Rx dB from
low alarm on QSPF channel 4. Host updates it every 48 hours.
Update only if Rx_LOS is not asserted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.104 |
| rcPlugOptModSupportExtremeExtraFeatures This boolean indicates whether or not the device
supports the Extreme extra features. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.71.1.1.105 |
| rcPlugOptModPEC This is a 16 byte left-justified ASCII field that
records the Nortel Product Equipment Code order
number for the module. Nortel part numbers are 9
bytes long, so the 10th through … | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.11 |
| rcPlugOptModCLEI This is a 10 byte left-justified ASCII field that
records the Nortel supplied Common Language
Equipment Identifier code for the device. The CLEI
code is a Telcordia human-readable… | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.12 |
| rcPlugOptModSupportsDDM This boolean indicates whether or not the device
supports the DDM capability. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.71.1.1.13 |
| rcPlugOptModAux1Monitoring This value tells what Aux1 is measuring.The values are
as follows:
0 Auxiliary monitoring not implemented
1 APD Bias Voltage mV (units of 10 mV)
2 Reserved
3 TE… | column | Integer32 | .1.3.6.1.4.1.2272.1.71.1.1.14 |
| rcPlugOptModAux2Monitoring This value tells you what AUX2 is measuring.The values are
as follows:
0 Auxiliary monitoring not implemented
1 APD Bias Voltage mV (units of 10 mV)
2 Reserved
3… | column | Integer32 | .1.3.6.1.4.1.2272.1.71.1.1.15 |
| rcPlugOptModWaveLength Nominal transmitter output wavelength at room
temperature. It is expressed in nano-meters. | column | Integer32 | .1.3.6.1.4.1.2272.1.71.1.1.16 |
| rcPlugOptModTemperature This value represents the internally measured
module temperature. It is expressed in units of
1/256 of a degree Celsius and can range from -40C
to +125C with 0.0001 accuracy.The … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.17 |
| rcPlugOptModTemperatureHighAlarmThreshold This value represents the vendor specified high
temperature threshold. If the device
temperature exceeds this value, a temperature high
is asserted. It is expressed in the same
un… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.18 |
| rcPlugOptModTemperatureLowAlarmThreshold This value represents the vendor specified low
temperature threshold. If the device
temperature falls below this value, a temperature
low is asserted. It is expressed in the same
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.19 |
| rcPlugOptModDdmStatusMask Each bit other than ddm-ok represents a specific error.
Any combination of error bits is allowed. | column | Bits | .1.3.6.1.4.1.2272.1.71.1.1.2 |
| rcPlugOptModTemperatureHighWarningThreshold This value represents the vendor specified high
temperature warning threshold. If the device
temperature exceeds this value, a temperature high
warning is asserted. It is expresse… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.20 |
| rcPlugOptModTemperatureLowWarningThreshold This value represents the vendor specified low
temperature warning threshold. If the device
temperature falls below this value, a temperature
low warning is asserted. It is expres… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.21 |
| rcPlugOptModVoltage This value represents the internally measured
supply voltage. It is a positive number expressed
in microvolts and can range from 0 to 65535 mV. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.22 |
| rcPlugOptModVoltageHighAlarmThreshold This value represents the vendor specified high
voltage threshold. If the measured voltage exceeds
this value, a high voltage is asserted. It
is a positive number expressed in mic… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.23 |
| rcPlugOptModVoltageLowAlarmThreshold This value represents the vendor specified low
voltage threshold. If the measured voltage falls
below this value, a low voltage is asserted.
It is a positive number expressed in m… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.24 |
| rcPlugOptModVoltageHighWarningThreshold This value represents the vendor specified high
voltage warning threshold. If the measured voltage
exceeds this value, a high voltage warning is
asserted. It is a positive number … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.25 |
| rcPlugOptModVoltageLowWarningThreshold This value represents the vendor specified low
voltage warning threshold. If the measured voltage
falls below this value, a low voltage warning is
asserted. It is a positive numbe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.26 |
| rcPlugOptModBias This value represents the internally measured
transmitter laser bias current. It is a positive
number expressed in units of 2 microamps and can
range from 0 to 131 mA with 0.0001 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.27 |
| rcPlugOptModBiasHighAlarmThreshold This value represents the vendor specified high
current threshold. If the measured bias
current exceeds this value, a high current alarm
is asserted. It is a positive number expre… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.28 |
| rcPlugOptModBiasLowAlarmThreshold This value represents the vendor specified low
current threshold. If the measured bias
current falls below this value, a low current
is asserted. It is a positive number
expressed… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.29 |
| rcPlugOptModCalibration The identifier value indicates type of calibration. | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.3 |
| rcPlugOptModBiasHighWarningThreshold This value represents the vendor specified high
current warning threshold. If the measured bias
current exceeds this value, a high current warning
is asserted. It is a positive nu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.30 |
| rcPlugOptModBiasLowWarningThreshold This value represents the vendor specified low
current warning threshold. If the measured bias
current falls below this value, a low current
warning is asserted. It is a positive … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.31 |
| rcPlugOptModTxPower This value represents the internally measured
coupled TX output power. It is a positive number
expressed in units of micro watts and can range
from 0 to 65.535 mW (-40 to 18.16 dB… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.32 |
| rcPlugOptModTxPowerHighAlarmThreshold This value represents the vendor specified high
transmit power threshold. If the measured
transmitter power exceeds this value, a
transmitter power high is asserted. It is
a posit… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.33 |
| rcPlugOptModTxPowerLowAlarmThreshold This value represents the vendor specified low
transmit power threshold. If the measured
transmitter power falls below this value, a
transmitter power low is asserted. It is a
pos… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.34 |
| rcPlugOptModTxPowerHighWarningThreshold This value represents the vendor specified high
transmit power warning threshold. If the measured
transmitter power exceeds this value, a
transmitter power high warning is asserte… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.35 |
| rcPlugOptModTxPowerLowWarningThreshold This value represents the vendor specified low
transmit power warning threshold. If the measured
transmitter power falls below this value, a
transmitter power low warning is asser… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.36 |
| rcPlugOptModRxPower This value represents the internally measured
received power. It is a positive number expressed
in units of micro watts and can range from 0 to
65.535 mW (-40 to 18.16 dBm). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.37 |
| rcPlugOptModRxPowerHighAlarmThreshold This value represents the vendor specified high
receiver power threshold. If the measured
received power exceeds this value, a receiver
power high is asserted. It is a positive
nu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.38 |
| rcPlugOptModRxPowerLowAlarmThreshold This value represents the vendor specified low
receiver power threshold. If the measured
received power falls below this value, a receiver
power low is asserted. It is a positive
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.39 |
| rcPlugOptModPowerMeasure The identifier value indicates type of external power. | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.4 |
| rcPlugOptModRxPowerHighWarningThreshold This value represents the vendor specified high
receiver power warning threshold. If the measured
received power exceeds this value, a receiver
power high warning is asserted. It … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.40 |
| rcPlugOptModRxPowerLowWarningThreshold This value represents the vendor specified low
receiver power warning threshold. If the measured
received power falls below this value, a receiver
power low warning is asserted. I… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.41 |
| rcPlugOptModAux1 This represents the internally measured A/D
value specified. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.42 |
| rcPlugOptModAux1HighAlarmThreshold This value represents the vendor specified high
Aux1 threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.43 |
| rcPlugOptModAux1LowAlarmThreshold This value represents the vendor specified low
Aux1 threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.44 |
| rcPlugOptModAux1HighWarningThreshold This value represents the vendor specified high
Aux1 warning threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.45 |
| rcPlugOptModAux1LowWarningThreshold This value represents the vendor specified low
Aux1 warning threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.46 |
| rcPlugOptModAux2 This represents the internally measured A/D
value specified. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.47 |
| rcPlugOptModAux2HighAlarmThreshold This value represents the vendor specified high
Aux1 threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.48 |
| rcPlugOptModAux2LowAlarmThreshold This value represents the vendor specified low
Aux1 threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.49 |
| rcPlugOptModConnectorType The connector type is a 16 character field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces. This is an assigned
name that indicates some cha… | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.5 |
| rcPlugOptModAux2HighWarningThreshold This value represents the vendor specified high
Aux1 warning threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.50 |
| rcPlugOptModAux2LowWarningThreshold This value represents the vendor specified low
Aux1 warning threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.51 |
| rcPlugOptModTemperatureStatus Used to indicate the current temperature status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.52 |
| rcPlugOptModVoltageStatus Used to indicate the current voltage status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.53 |
| rcPlugOptModBiasStatus Used to indicate the current laser bias status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.54 |
| rcPlugOptModTxPowerStatus Used to indicate the current transmitter power
status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.55 |
| rcPlugOptModRxPowerStatus Used to indicate the current receiver power status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.56 |
| rcPlugOptModAux1Status Used to indicate the current Aux1 status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.57 |
| rcPlugOptModAux2Status Used to indicate the current Aux2 status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.58 |
| rcPlugOptModQSFPTx1Bias This value represents the internally measured transmitter
laser bias current in channel 1 of QSFP.. It is a positive
number expressed in units of 2 microamps and can range
from … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.59 |
| rcPlugOptModQSFPTx2Bias This value represents the internally measured transmitter
laser bias current in channel 2 of QSFP.. It is a positive
number expressed in units of 2 microamps and can range
from … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.60 |
| rcPlugOptModQSFPTx3Bias This value represents the internally measured transmitter
laser bias current in channel 3 of QSFP.. It is a positive
number expressed in units of 2 microamps and can range
from … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.61 |
| rcPlugOptModQSFPTx4Bias This value represents the internally measured transmitter
laser bias current in channel 4 of QSFP.. It is a positive
number expressed in units of 2 microamps and can range
from … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.62 |
| rcPlugOptModQSFPTx1Power This value represents the internally measured TX output
power in channel 1 of QSFP. It is a positive number
expressed in units of micro watts and can range from 0
to 65.535 mW (… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.63 |
| rcPlugOptModQSFPTx2Power This value represents the internally measured TX output
power in channel 2 of QSFP. It is a positive number
expressed in units of micro watts and can range from 0
to 65.535 mW (… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.64 |
| rcPlugOptModQSFPTx3Power This value represents the internally measured TX output
power in channel 3 of QSFP. It is a positive number
expressed in units of micro watts and can range from 0
to 65.535 mW … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.65 |
| rcPlugOptModQSFPTx4Power This value represents the internally measured TX output
power in channel 4 of QSFP. It is a positive number
expressed in units of micro watts and can range from 0
to 65.535 mW … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.66 |
| rcPlugOptModQSFPRx1Power This value represents the internally measured received
power in channel 1 of QSFP. It is a positive number
expressed in units of micro watts and can range from 0
to 65.535 mW (… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.67 |
| rcPlugOptModQSFPRx2Power This value represents the internally measured received
power in channel 2 of QSFP. It is a positive number
expressed in units of micro watts and can range from 0
to 65.535 mW (… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.68 |
| rcPlugOptModQSFPRx3Power This value represents the internally measured received
power in channel 3 of QSFP. It is a positive number
expressed in units of micro watts and can range from 0
to 65.535 mW (-… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.69 |
| rcPlugOptModVendorPartNumber The vendor part number is a 16 byte field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces, defining the vendor
part number or product name. | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.7 |
| rcPlugOptModQSFPRx4Power This value represents the internally measured received
power in channel 1 of QSFP. It is a positive number
expressed in units of micro watts and can range from 0
to 65.535 mW (… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.70 |
| rcPlugOptModQSFPTx1BiasStatus Used to indicate the current laser bias status in
channel 1 for QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.71 |
| rcPlugOptModQSFPTx2BiasStatus Used to indicate the current laser bias status in
channel 2 for QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.72 |
| rcPlugOptModQSFPTx3BiasStatus Used to indicate the current laser bias status in
channel 3 for QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.73 |
| rcPlugOptModQSFPTx4BiasStatus Used to indicate the current laser bias status in
channel 4 for QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.74 |
| rcPlugOptModQSFPTx1PowerStatus Used to indicate the current transmitter power
status in channel 1 of QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.75 |
| rcPlugOptModQSFPTx2PowerStatus Used to indicate the current transmitter power
status in channel 2 of QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.76 |
| rcPlugOptModQSFPTx3PowerStatus Used to indicate the current transmitter power
status in channel 3 of QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.77 |
| rcPlugOptModQSFPTx4PowerStatus Used to indicate the current transmitter power
status in channel 4 of QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.78 |
| rcPlugOptModQSFPRx1PowerStatus Used to indicate the current receiver power
status in channel 1 for QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.79 |
| rcPlugOptModVendorRevNumber The vendor revision number is a 4-byte field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces, defining the
vendor product revision number. | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.8 |
| rcPlugOptModQSFPRx2PowerStatus Used to indicate the current receiver power
status in channel 2 for QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.80 |
| rcPlugOptModQSFPRx3PowerStatus Used to indicate the current receiver power
status in channel 3 for QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.81 |
| rcPlugOptModQSFPRx4PowerStatus Used to indicate the current receiver power
status in channel 4 for QSFP | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.82 |
| rcPlugOptModExtremeSku This is a 32 bytes field to hold the Extreme SKU number. | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.83 |
| rcPlugOptModPowerOnCounter This value represents the power-on counter. Host increments it
by 1 every 48 hours. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2272.1.71.1.1.84 |
| rcPlugOptModTxDdmInitial This value represents the Tx dB from low alarm. Host sets
it once only, after the first 48 consecutive hours of operation.
Update only if Tx_disable is not active. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.85 |
| rcPlugOptModTxDdmLastGasp This value represents the last gasp of Tx dB from low alarm.
Host updates it every 48 hours. Update only if Tx_disable is
not active. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.86 |
| rcPlugOptModRxDdmInitial This value represents the Rx dB from low alarm. Host sets
it after the first 48 consecutive hours of operation since
PMD power cycle. Update only if Rx_LOS is not asserted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.87 |
| rcPlugOptModRxDdmLastGasp This value represents the last gasp of Rx dB from low alarm.
Host updates it every 48 hours. Update only if Rx_LOS is
not asserted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.88 |
| rcPlugOptModQSFPTx1DdmInitial This value represents the Tx dB from low alarm on QSPF
channel 1. Host sets it once only, after the first 48 consecutive
hours of operation. Update only if Tx_disable is not act… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.89 |
| rcPlugOptModVendorSN The vendor serial number is a 16 character field
that contains ASCII characters, left-aligned and
padded on the right with ASCII spaces, defining
the vendor serial number for the … | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.9 |
| rcPlugOptModQSFPTx1DdmLastGasp This value represents the last gasp of Tx dB from low alarm
on QSPF channel 1. Host updates it every 48 hours. Update only
if Tx_disable is not active. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.90 |
| rcPlugOptModQSFPRx1DdmInitial This value represents the Rx dB from low alarm on QSPF
channel 1. Host sets it after the first 48 consecutive hours
of operation since PMD power cycle. Update only if Rx_LOS is … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.91 |
| rcPlugOptModQSFPRx1DdmLastGasp This value represents the last gasp of Rx dB from low alarm
on QSPF channel 1. Host updates it every 48 hours. Update only
if Rx_LOS is not asserted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.92 |
| rcPlugOptModQSFPTx2DdmInitial This value represents the Tx dB from low alarm on QSPF
channel 2. Host sets it once only, after the first 48 consecutive
hours of operation. Update only if Tx_disable is not act… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.93 |
| rcPlugOptModQSFPTx2DdmLastGasp This value represents the last gasp of Tx dB from low alarm
on QSPF channel 2. Host updates it every 48 hours. Update
only if Tx_disable is not active. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.94 |
| rcPlugOptModQSFPRx2DdmInitial This value represents the Rx dB from low alarm on QSPF
channel 2. Host sets it after the first 48 consecutive hours
of operation since PMD power cycle. Update only if Rx_LOS is … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.95 |
| rcPlugOptModQSFPRx2DdmLastGasp This value represents the last gasp of Rx dB from low alarm
on QSPF channel 2. Host updates it every 48 hours. Update
only if Rx_LOS is not asserted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.96 |
| rcPlugOptModQSFPTx3DdmInitial This value represents the Tx dB from low alarm on QSPF
channel 3. Host sets it once only, after the first 48 consecutive
hours of operation. Update only if Tx_disable is not act… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.97 |
| rcPlugOptModQSFPTx3DdmLastGasp This value represents the last gasp of Tx dB from low alarm
on QSPF channel 3. Host updates it every 48 hours. Update
only if Tx_disable is not active. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.98 |
| rcPlugOptModQSFPRx3DdmInitial This value represents the Rx dB from low alarm on QSPF
channel 3. Host sets it after the first 48 consecutive hours
of operation since PMD power cycle. Update only if Rx_LOS is … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.99 |