rcMltConfiguredMembers

RC-MLT-MIB · .1.3.6.1.4.1.2272.1.17.10.1.37
MIB view Table view

Object

column r/w RAPID-CITYPortSet 
The set of ports that are configured members of this MLT.
Toronto release allows us to add a port to a LACP enabled
MLT. These port get added as ConfiguredMembers

Context

MIB
RC-MLT-MIB
OID
.1.3.6.1.4.1.2272.1.17.10.1.37
Type
column
Access
readwrite
Status
current
Parent
rcMltEntry
Table
rcMltTable
Siblings
48

Syntax

RAPID-CITYPortSet
Source
RAPID-CITYPortSet
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcMltId
A value that uniquely identifies the Multi-Link Trunk associated with this entry.
columnInteger32.1.3.6.1.4.1.2272.1.17.10.1.1
rcMltDistributionAlgorithm
The load balancing algorithm.
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.10
rcMltIfIndex
Used to indicate the 'logical' ifIndex assigned to this MLT.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2272.1.17.10.1.11
rcMltMltType
MLT type. virtaulIstMlt(4) to Enable/Disable Virtual IST on an MLT. Virtual IST on an MLT can only be enabled when spbm-config-mode boot flag is disabled
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.12
rcMltSmltId
Split MLT id.
columnInteger32.1.3.6.1.4.1.2272.1.17.10.1.13
rcMltRunningType
Split MLT running type.
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.14
rcMltSvlanPortType
Set MLT port type.
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.15
rcMltMulticastDistribution
Enable/Disable multicast distribution per mlt.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.16
rcMltLacp10gBackup
Enable/Disable 10G Mlt reliance backup mode.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.17
rcMltAggregatable
Enable/Disable link aggregation on a MLT.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.18
rcMltClearLinkAggregate
clear link aggregate, equivalent to disable and re-enable aggregatable on the MLT.
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.19
rcMltName
An administratively-assigned name for this MLT.
columnOctetString.1.3.6.1.4.1.2272.1.17.10.1.2
rcMltNtStgEnable
Indicates whether this MLT is operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.17.10.1.20
rcMltDesignatedPort
Indicates the Designated port for the MLT.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2272.1.17.10.1.21
rcMltAggOperState
Link aggregation state on a MLT.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.22
rcMltAggTimeOfLastOperChange
The time value since the interface entered its current operational state.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.17.10.1.23
rcMltVplsMgmtVlan
Management Vlan is configured on this mlt
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.24
rcMltLoadDistributionOption
Used to specify the Load Balancing option for MLT in UNI
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.25
rcMltUniAggrMacIdx
Used to specify the index of the mac address pool reserved for MLT uni
columnInteger32.1.3.6.1.4.1.2272.1.17.10.1.26
rcMltUniAggrMacAddress
Used to display the mac address reserved for this MLT
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2272.1.17.10.1.27
rcMltQinqEtherType
The qinq ether type value. It should be displayed and input as Hex value. It would only be used when MLT is associated with QnQ service UNI. Otherwise, it would be ignored
columnInteger32.1.3.6.1.4.1.2272.1.17.10.1.28
rcMltEgressCosProfileName
Mlt Egress COS Profile Name, which is defined by rcCosProfileTable
columnOctetString.1.3.6.1.4.1.2272.1.17.10.1.29
rcMltPortMembers
The set of ports that are members of this MLT.
columnRAPID-CITYPortSet.1.3.6.1.4.1.2272.1.17.10.1.3
rcMltEgressPolicerAdminState
Enable/disable Mlt Egress Policer
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.30
rcMltAggrEgressBandwidth
Aggregated Egress Bandwidth Policer is used.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.31
rcMltAggrIngressBandwidth
Aggregated Ingress Bandwidth Policer is used.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.32
rcMltAggrMacAlloc
Aggregated Mac Allocation is used
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.33
rcMltAggMinLink
If number of active links goes below configured minimum-link number, the entire LAG is declared down.
columnInteger32.1.3.6.1.4.1.2272.1.17.10.1.34
rcMltMtu
MTU for ports in Mlt
columnInteger32.1.3.6.1.4.1.2272.1.17.10.1.35
rcMltInterfaceType
This value indicates whether ports in the mlt are of type <normal/silent/uni>. A port can be included in any EVPN service only if this attribute is set to uni. If the port is not …
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.36
rcMltMtuAdminState
Set Mlt MTU enable or disable
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.38
rcMltPeerPortMembers obsolete
The set of Peer ports which are connected to local ports (rcMltPortMember) of this MLT. This object has been deprecated/obsolete by object rcMltPeerPortMembersList
columnRAPID-CITYPortSet.1.3.6.1.4.1.2272.1.17.10.1.39
rcMltPortType
The type of MLT port: access(1) or trunk(2).
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.4
rcMltCpLimitPktRate
Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second.
columnInteger32.1.3.6.1.4.1.2272.1.17.10.1.40
rcMltCpLimitShutDownEnable
Used to indicate if the mlt-ports should be shutdown when the CpLimitPktRate is exceeded.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.17.10.1.41
rcMltVlanIdList
This bitfield is used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1.
columnOctetString.1.3.6.1.4.1.2272.1.17.10.1.42
rcMltEntryOwner
Defines the owner of the MLT.
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.43
rcMltDatapathProgrammingState
Defines the datapath programming state of the MLT.
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.44
rcMltL4Hash
If enabled all the non fragmented L4 packets will take L4 hashing and all the fragmented L4 packets and L3 packets will take L3 hashing. If disabled then both L3 and L4 packets wi…
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.17.10.1.45
rcMltPrivateVlanType
The mode used when private VLAN is associated with MLT. If the VLAN is not private then this is ignored. If the VLAN is private then the value must be either trunk, isolated, or p…
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.46
rcMltBpduMode
This object specifies the BPDU send/receive mode: send/receive BPDUs on all trunk ports (1) or on a single trunk port (2).
columnEnumeration.1.3.6.1.4.1.2272.1.17.10.1.47
rcMltPeerPortMembersList
A list of peer ports in the display format slot/port,slot/port/sub-port. A port display format cannot be always hardcoded as slot/port. It depends on the dynamic setting of the po…
columnOctetString.1.3.6.1.4.1.2272.1.17.10.1.48
rcMltFlexUniEnable
Used to set Flex UNI enable/disable on MLT
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.17.10.1.49
rcMltNumVlanIds
Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.17.10.1.5
rcMltVlanIds
An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, whil…
columnOctetString.1.3.6.1.4.1.2272.1.17.10.1.6
rcMltRowStatus
Used to create/delete entries in the rcMltTable.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.17.10.1.7
rcMltEnable
Enable the entry.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.17.10.1.8
rcMltLoadBalance
Perform load balance?
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.17.10.1.9