RC-MLT-MIB Table View

A table used to store Mlt interface
statistics.

rcStatMltIfExtnEntry row .1.3.6.1.4.1.2272.1.12.6.1.1

Mlt interface statistics

Indexes

rcStatMltIfExtnMltId

Column	Syntax	OID
rcStatMltIfExtnMltId Mlt Id	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.2272.1.12.6.1.1.1
rcStatMltIfExtnIfInMulticastPkts multi-pkts to upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.1.1.2
rcStatMltIfExtnIfInBroadcastPkts broad-pkts to upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.1.1.3
rcStatMltIfExtnIfOutMulticastPkts multi-pkts from upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.1.1.4
rcStatMltIfExtnIfOutBroadcastPkts broad-pkts from upper	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.1.1.5
rcStatMltIfExtnIfHCInOctets The total number of octets received on the MLT interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.6
rcStatMltIfExtnIfHCInUcastPkts The number of packets delivered by this MLT to a higher MLT that were not addressed to a nulticast or broadcase address at this sublayer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.7
rcStatMltIfExtnIfHCInMulticastPkt The number of packets delivered to this MLT that were addressed to a nulticast address at this sublayer. For a MAC layer protocol, this number includes both Group and Functional addresses.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.8
rcStatMltIfExtnIfHCInBroadcastPkt The number of packets delivered to this MLT that were addressed to a broadcast address at this sublayer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.9
rcStatMltIfExtnIfHCOutOctets The total number of octets transmitted out of the MLT interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.10
rcStatMltIfExtnIfHCOutUcastPkts The number of packets that hight-level protocols requested be transmitted that were not addressed to a multicast address at this MLT. This total number includes those packets discarded or unsent.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.11
rcStatMltIfExtnIfHCOutMulticast The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a multicast address at this MLT, including those that were discarded or not sent. For a MAC layer protocol, …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.12
rcStatMltIfExtnIfHCOutBroadcast The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a broadcase address at this MLT, including those that were discarded or not sent.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.13
rcStatMltIfExtnIfHCInLsmPkts The total number of Link State Messaging (LSM) packets delivered to this MLT.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.14
rcStatMltIfExtnIfHCOutLsmPkts The total number of Link State Messaging (LSM) packets trasmitted on this MLT.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.1.1.15

A table used to store Mlt Ethernet
statistics.

rcStatMltEtherEntry row .1.3.6.1.4.1.2272.1.12.6.2.1

Mlt enternet statistics

Indexes

rcStatMltEtherMltId

Column	Syntax	OID
rcStatMltEtherMltId A value that uniquely identifies the Multi-Link Trunk associated with this entry.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.2272.1.12.6.2.1.1
rcStatMltEtherAlignmentErrors A count of frames received on a particular MLT that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentErr…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.2
rcStatMltEtherFCSErrors A count of frames received on an MLT that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.3
rcStatMltEtherSingleCollFrames A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this objects is also counted by the correspondi…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.4
rcStatMltEtherMultipleCollFrames A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the correspond…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.5
rcStatMltEtherSQETestError A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular MLT. SQE stands for Signal Quality Error.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.6
rcStatMltEtherDeferredTransmiss A count of frames for which the first transmission attempt on a particular MLT is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.7
rcStatMltEtherLateCollisions The number of times that a collision is detected on a particular MLT later than 512 bit-times (64 octets) into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.8
rcStatMltEtherExcessiveCollis A count of frames for which transmission on a particular MLT fails due to excessive collisions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.9
rcStatMltEtherIMacTransmitError A count of frames for which transmission on a particular MLT fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding inst…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.10
rcStatMltEtherCarrierSenseError The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular MLT. The count represented by an instance of this object is incremented at most onc…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.11
rcStatMltEtherFrameTooLong A count of frames received on a particular MLT that exceed the maximum permitted size (1518 octets). The count represented by an instance os this object is incremented when the frame TooLong status is returned by th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.12
rcStatMltEtherIMacReceiveError A count of frames for which reception on a particular MLT fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.2.1.13

A table used to store Mlt interface utilization.

rcStatMltIfUtilEntry row .1.3.6.1.4.1.2272.1.12.6.30.1

Mlt interface utilization

Indexes

rcStatMltIfUtilMltId

Column	Syntax	OID
rcStatMltIfUtilMltId To assign an Id within the range specified to the Mlt created	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.12.6.30.1.1
rcStatMltIfUtilIfHCInOctets The total number of octets received on the MLT interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.30.1.2
rcStatMltIfUtilIfHCInUtil The best estimate of the mean physical layer network utilization on this interface during this interval, in percent.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.30.1.3
rcStatMltIfUtilIfHCOutOctets The total number of octets transmitted out of the MLT interface, including framing characters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.12.6.30.1.4
rcStatMltIfUtilIfHCOutUtil The best estimate of the mean physical layer network utilization on this interface during this interval, in percent.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.6.30.1.5

A table used to store statistics for MLT members utilization.

rcStatMltUtilEntry row .1.3.6.1.4.1.2272.1.12.6.33.1

An entry for MLT members utilization statistics table.

Indexes

rcMltId rcStatMltUtilPortIfIndex rcStatMltUtilTrafficType

Column	Syntax	OID
rcStatMltUtilPortIfIndex Port ifIndex, member of rcMltId.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.12.6.33.1.1
rcStatMltUtilTrafficType Type of traffic for one MLT port interface.	Enumeration Enumerated Values: 1 rx 2 tx 3 rxTx	.1.3.6.1.4.1.2272.1.12.6.33.1.2
rcStatMltUtilTrafficLast5Min This object returns the percentage of traffic on one MLT port interface for the last 5 minutes.	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.12.6.33.1.3
rcStatMltUtilTrafficLast30Min This object returns the percentage of traffic on one MLT port interface for the last 30 minutes.	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.12.6.33.1.4
rcStatMltUtilTrafficLast1Hour This object returns the percentage of traffic on one MLT port interface for the last hour.	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.12.6.33.1.5

A list of Multi-Link Trunk entries. The number of 
entries is given by rcMltNumMlts.

rcMltEntry row .1.3.6.1.4.1.2272.1.17.10.1

Entry containing configuration information for a
particular Multi-Link Trunk.

Indexes

rcMltId

Column	Syntax	OID
rcMltId A value that uniquely identifies the Multi-Link Trunk associated with this entry.	Integer32 Constraints: range: 1-512	.1.3.6.1.4.1.2272.1.17.10.1.1
rcMltName An administratively-assigned name for this MLT.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.17.10.1.2
rcMltPortMembers The set of ports that are members of this MLT.	RAPID-CITYPortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.17.10.1.3
rcMltPortType The type of MLT port: access(1) or trunk(2).	Enumerationr/w Enumerated Values: 1 access 2 trunk	.1.3.6.1.4.1.2272.1.17.10.1.4
rcMltNumVlanIds Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.17.10.1.5
rcMltVlanIds An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the…	OctetStringr/w Constraints: range: 0-8192	.1.3.6.1.4.1.2272.1.17.10.1.6
rcMltRowStatus Used to create/delete entries in the rcMltTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.17.10.1.7
rcMltEnable Enable the entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.8
rcMltLoadBalance Perform load balance?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.9
rcMltDistributionAlgorithm The load balancing algorithm.	Enumerationr/w Enumerated Values: 1 none 2 basic 3 advanced 4 enhanced	.1.3.6.1.4.1.2272.1.17.10.1.10
rcMltIfIndex Used to indicate the 'logical' ifIndex assigned to this MLT.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.17.10.1.11
rcMltMltType MLT type. virtaulIstMlt(4) to Enable/Disable Virtual IST on an MLT. Virtual IST on an MLT can only be enabled when spbm-config-mode boot flag is disabled	Enumerationr/w Enumerated Values: 1 normalMLT 2 istMLT 3 splitMLT 4 virtualIstMlt	.1.3.6.1.4.1.2272.1.17.10.1.12
rcMltSmltId Split MLT id.	Integer32r/w Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.17.10.1.13
rcMltRunningType Split MLT running type.	Enumeration Enumerated Values: 1 normalMLT 2 istMLT 3 splitMLT 4 virtualIstMlt	.1.3.6.1.4.1.2272.1.17.10.1.14
rcMltSvlanPortType Set MLT port type.	Enumerationr/w Enumerated Values: 1 normal 2 uni 3 nni	.1.3.6.1.4.1.2272.1.17.10.1.15
rcMltMulticastDistribution Enable/Disable multicast distribution per mlt.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.16
rcMltLacp10gBackup Enable/Disable 10G Mlt reliance backup mode.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.17
rcMltAggregatable Enable/Disable link aggregation on a MLT.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.18
rcMltClearLinkAggregate clear link aggregate, equivalent to disable and re-enable aggregatable on the MLT.	Enumerationr/w Enumerated Values: 1 clear 2 none	.1.3.6.1.4.1.2272.1.17.10.1.19
rcMltNtStgEnable Indicates whether this MLT is operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.20
rcMltDesignatedPort Indicates the Designated port for the MLT.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.17.10.1.21
rcMltAggOperState Link aggregation state on a MLT.	RAPID-CITYEnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.22
rcMltAggTimeOfLastOperChange The time value since the interface entered its current operational state.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.17.10.1.23
rcMltVplsMgmtVlan Management Vlan is configured on this mlt	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.24
rcMltLoadDistributionOption Used to specify the Load Balancing option for MLT in UNI	Enumerationr/w Enumerated Values: 1 bmac 2 cmac 3 bvid 4 isid	.1.3.6.1.4.1.2272.1.17.10.1.25
rcMltUniAggrMacIdx Used to specify the index of the mac address pool reserved for MLT uni	Integer32r/w Constraints: range: 0-448	.1.3.6.1.4.1.2272.1.17.10.1.26
rcMltUniAggrMacAddress Used to display the mac address reserved for this MLT	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.17.10.1.27
rcMltQinqEtherType The qinq ether type value. It should be displayed and input as Hex value. It would only be used when MLT is associated with QnQ service UNI. Otherwise, it would be ignored	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.17.10.1.28
rcMltEgressCosProfileName Mlt Egress COS Profile Name, which is defined by rcCosProfileTable	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.2272.1.17.10.1.29
rcMltEgressPolicerAdminState Enable/disable Mlt Egress Policer	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.30
rcMltAggrEgressBandwidth Aggregated Egress Bandwidth Policer is used.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.31
rcMltAggrIngressBandwidth Aggregated Ingress Bandwidth Policer is used.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.32
rcMltAggrMacAlloc Aggregated Mac Allocation is used	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.33
rcMltAggMinLink If number of active links goes below configured minimum-link number, the entire LAG is declared down.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.17.10.1.34
rcMltMtu MTU for ports in Mlt	Integer32r/w Constraints: range: 1518-9600	.1.3.6.1.4.1.2272.1.17.10.1.35
rcMltInterfaceType This value indicates whether ports in the mlt are of type <normal/silent/uni>. A port can be included in any EVPN service only if this attribute is set to uni. If the port is not part of any VLAN the interface-type is s…	Enumerationr/w Enumerated Values: 1 normal 2 silent 3 uni	.1.3.6.1.4.1.2272.1.17.10.1.36
rcMltConfiguredMembers The set of ports that are configured members of this MLT. Toronto release allows us to add a port to a LACP enabled MLT. These port get added as ConfiguredMembers	RAPID-CITYPortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.17.10.1.37
rcMltMtuAdminState Set Mlt MTU enable or disable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.38
rcMltPeerPortMembersobsolete The set of Peer ports which are connected to local ports (rcMltPortMember) of this MLT. This object has been deprecated/obsolete by object rcMltPeerPortMembersList	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.17.10.1.39
rcMltCpLimitPktRate Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second.	Integer32r/w Constraints: range: 1000-20000	.1.3.6.1.4.1.2272.1.17.10.1.40
rcMltCpLimitShutDownEnable Used to indicate if the mlt-ports should be shutdown when the CpLimitPktRate is exceeded.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.41
rcMltVlanIdList This bitfield is used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.17.10.1.42
rcMltEntryOwner Defines the owner of the MLT.	Enumeration Enumerated Values: 1 none 2 local 3 remote 4 localAndRemote	.1.3.6.1.4.1.2272.1.17.10.1.43
rcMltDatapathProgrammingState Defines the datapath programming state of the MLT.	Enumeration Enumerated Values: 1 none 2 local 3 remote 4 localAndRemote	.1.3.6.1.4.1.2272.1.17.10.1.44
rcMltL4Hash If enabled all the non fragmented L4 packets will take L4 hashing and all the fragmented L4 packets and L3 packets will take L3 hashing. If disabled then both L3 and L4 packets will take L3 hashing. It is introduce by r…	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.17.10.1.45
rcMltPrivateVlanType The mode used when private VLAN is associated with MLT. If the VLAN is not private then this is ignored. If the VLAN is private then the value must be either trunk, isolated, or promiscuous. Setting the value to trunk …	Enumerationr/w Enumerated Values: 1 trunk 2 isolated 3 promiscuous 4 none	.1.3.6.1.4.1.2272.1.17.10.1.46
rcMltBpduMode This object specifies the BPDU send/receive mode: send/receive BPDUs on all trunk ports (1) or on a single trunk port (2).	Enumerationr/w Enumerated Values: 1 all-ports 2 single-port	.1.3.6.1.4.1.2272.1.17.10.1.47
rcMltPeerPortMembersList A list of peer ports in the display format slot/port,slot/port/sub-port. A port display format cannot be always hardcoded as slot/port. It depends on the dynamic setting of the port, such as channelized. This object is …	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.17.10.1.48
rcMltFlexUniEnable Used to set Flex UNI enable/disable on MLT	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.10.1.49

Table containing config info for SLT

rcSltPortEntry row .1.3.6.1.4.1.2272.1.17.12.1

Entry containing configuration information for a
particular Multi-Link Trunk.

Indexes

rcSltPortIfIndex

Column	Syntax	OID
rcSltPortIfIndex An interface for this SLT.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.17.12.1.1
rcSltPortSmltId A uniquely identifies the Single-Link Trunk associated with this entry.	Integer32r/w Constraints: range: 1-512	.1.3.6.1.4.1.2272.1.17.12.1.2
rcSltPortOperType The current operate type of the port normal or smlt.	Enumeration Enumerated Values: 1 normal 2 smlt	.1.3.6.1.4.1.2272.1.17.12.1.3
rcSltPortRowStatus Used to create/delete entries of the Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.17.12.1.4

Mlt Virtual LACP table

rcMltVlacpEntry row .1.3.6.1.4.1.2272.1.17.13.1

Entry containing info. for a particular port

Indexes

rcMltId

Column	Syntax	OID
rcMltVlacpAdminEnable Administratively enable/disable Virtual LACP on a MLT	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.13.1.1
rcMltVlacpFastPeriodicTimer The number of miliseconds between periodic transmissions using Short Timeouts	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.17.13.1.2
rcMltVlacpTimeoutScale Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.17.13.1.3
rcMltVlacpEtherMacAddress Multicast Mac Address exclusively used for VLACPDU's	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.17.13.1.4
rcMltVlacpDualHomingEnable Enable/Disable Dual homing on Virtual LACP on a MLT	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.17.13.1.5

Table contains Bridge Vlan configured information for 
Primary and Secondary ports for MLT-UNI

rcMltBvidPortEntry row .1.3.6.1.4.1.2272.1.17.14.1

Entry with Info about VLAN with its Primary and secondary ports for MLT-UNI

Indexes

rcMltBvidMltId rcMltBvidVlanId

Column	Syntax	OID
rcMltBvidMltId VLAN ID of the Port List	Integer32 Constraints: range: 1-256	.1.3.6.1.4.1.2272.1.17.14.1.1
rcMltBvidVlanId VLAN ID of the Port List	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.17.14.1.2
rcMltBvidPrimaryPort Primary port of the MLT for the VLAN when load distribution option is b-vid	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.17.14.1.3
rcMltBvidSecondaryPort Secondary port of the MLT for the VLAN when load distribution option is b-vid	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.17.14.1.4
rcMltBvidRowStatus Used to Add/delete entries in the table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.17.14.1.5