rbnCesCfgJtrBfrDepth
RBN-CES-MIB ·
.1.3.6.1.4.1.2352.2.56.1.2.1.3
Object
The number of microseconds of expected packet delay variation for this CES PW over PSN. The value must be at least two times the expected packet jitter through the network.
Context
- MIB
- RBN-CES-MIB
- OID
.1.3.6.1.4.1.2352.2.56.1.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- microseconds
- Parent
- rbnCesCfgEntry
- Table
- rbnCesCfgTable
- Siblings
- 8
Syntax
microseconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rbnCesCfgIndex This object is used to uniquely identify a CES circuit. The value
of this object should be the same as the value of ifIndex when they
are used to identify the same CES circuit. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2352.2.56.1.2.1.1 |
| rbnCesCfgPktLatency This object specifies the time of packetizing frames into a packet.
The packet latency is calculated by multiplying number of frames by a
constant frame packetization time(125 mic… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.56.1.2.1.2 |
| rbnCesCfgConsecPktsInSync The number of consecutive packets that are required to
exit loss of packet state(LOPS) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.56.1.2.1.4 |
| rbnCesCfgConsecMissPktsOutSync The number of consecutive missing packets that are required to
enter loss of packet state(LOPS) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.56.1.2.1.5 |
| rbnCesCfgIdlePattern The object determines the value to be used on the TDM channel
when packets have over/underflow in the jitter buffer or
are missing for any reason at the CES bound. The default val… | column | OctetString | .1.3.6.1.4.1.2352.2.56.1.2.1.6 |
| rbnCesCfgTrunkCtl This object enforces the RFC 5086 requirement that controls at most
one CES PW state(AIS or RDI) on the outgoing T1/E1 trunk. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.56.1.2.1.7 |
| rbnCesCfgAdminStatus This object controls CES feature on the circuit. Setting this object
to 'up' enables CES on the circuit; setting this object to 'down'
disables CES on the circuit and removes corr… | column | Enumeration | .1.3.6.1.4.1.2352.2.56.1.2.1.8 |
| rbnCesCfgRowStatus This object is used to manage the creation and deletion of CES
configuration conceptual rows.
Except 'rbnCesCfgAdminStatus', 'read-create' objects in
the conceptual… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2352.2.56.1.2.1.9 |