RBN-CES-MIB Table View

Configuration table for CES circuits.

rbnCesCfgEntry row .1.3.6.1.4.1.2352.2.56.1.2.1

Each entry in this table represents a CES circuit.

Indexes

rbnCesCfgIndex

Column	Syntax	OID
rbnCesCfgIndex This object is used to uniquely identify a CES circuit. The value of this object should be the same as the value of ifIndex when they are used to identify the same CES circuit.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2352.2.56.1.2.1.1
rbnCesCfgPktLatency This object specifies the time of packetizing frames into a packet. The packet latency is calculated by multiplying number of frames by a constant frame packetization time(125 microseconds). The system packetizes 8 fram…	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2352.2.56.1.2.1.2
rbnCesCfgJtrBfrDepth The number of microseconds of expected packet delay variation for this CES PW over PSN. The value must be at least two times the expected packet jitter through the network.	microsecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2352.2.56.1.2.1.3
rbnCesCfgConsecPktsInSync The number of consecutive packets that are required to exit loss of packet state(LOPS)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2352.2.56.1.2.1.4
rbnCesCfgConsecMissPktsOutSync The number of consecutive missing packets that are required to enter loss of packet state(LOPS)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2352.2.56.1.2.1.5
rbnCesCfgIdlePattern The object determines the value to be used on the TDM channel when packets have over/underflow in the jitter buffer or are missing for any reason at the CES bound. The default value for E1 is 0x54 and T1 is 0x3F.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.2352.2.56.1.2.1.6
rbnCesCfgTrunkCtl This object enforces the RFC 5086 requirement that controls at most one CES PW state(AIS or RDI) on the outgoing T1/E1 trunk.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.56.1.2.1.7
rbnCesCfgAdminStatus This object controls CES feature on the circuit. Setting this object to 'up' enables CES on the circuit; setting this object to 'down' disables CES on the circuit and removes corresponding entries in the rbnCesStatsTabl…	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2352.2.56.1.2.1.8
rbnCesCfgRowStatus This object is used to manage the creation and deletion of CES configuration conceptual rows. Except 'rbnCesCfgAdminStatus', 'read-create' objects in the conceptual row cannot be modified when this object…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2352.2.56.1.2.1.9

CES statistics table.

rbnCesStatsEntry row .1.3.6.1.4.1.2352.2.56.1.3.1

Each entry in this table represents a CES circuit.

Indexes

No indexes recorded

Column	Syntax	OID
rbnCesStatsEgressOutOfBfrDroppedPkts Number of packets dropped due to buffer starvation in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.1
rbnCesStatsEgressMissingPkts Number of missing packets detected via control word sequence number gaps in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.2
rbnCesStatsEgressMalformedPkts Number of malformed packets including unexpected size in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.3
rbnCesStatsEgressJtrBfrOverrunPkts Number of packets dropped due to jitter buffer overrun in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.4
rbnCesStatsEgressJtrBfrUnderruns Number of times jitter buffer underrun has been detected in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.5
rbnCesStatsEgressMisOrderPkts Number of out of sequence packets received in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.6
rbnCesStatsEgressRemoteLossPkts Number of packets received with the R bit set in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.7
rbnCesStatsEgressWindowSwitchovers Number of times serial number lost synchronization and was forced to move to a new window in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.8
rbnCesStatsEgressRemoteAcDownPkts Number of packets received with L bit set to 1, indicating that the far end's attachment circuit is down (in LOF or LOS or AIS) in the PSN to TDM direction(egress). Either AIS or idle pattern was played out on the local…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.9
rbnCesStatsEgressDuplicatePkts Number of packets dropped due to being duplicated, as determined by the PW codeword sequence number in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.10
rbnCesStatsEgressDeniedPkts Number of packets dropped because they are denied in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.11
rbnCesStatsEgressErrorEvents Number of times a packet is replaced with a dummy packet in the PSN to TDM direction(egress) because the system is in underrun mode or the packet was lost.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.12
rbnCesStatsEgressErrorDataBlocks Block of data transmitted to the TDM attachment circuit and of a size defined in accordance with the [ITU-T G.826] rules for the corresponding TDM service that has experienced at least one CESoPSN/SAToP error event in t…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.13
rbnCesStatsIngressOutOfBfrDroppedPkts Number of packets that could not be sent due to buffer starvation in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.14
rbnCesStatsIngressSizeViolationDroppedPkts Number of packets not transmitted because their size is greater than the largest supported in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.15
rbnCesStatsIngressTransmitDroppedPkts Number of packets not transmitted due to congestion in the transmit queue in the PSN to TDM direction(egress).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2352.2.56.1.3.1.16

CES excessive packet loss configuration table.

rbnCesEplCfgEntry row .1.3.6.1.4.1.2352.2.56.1.4.1

Each entry in this table represents a set of global CES excessive
packet loss configuration.

Indexes

rbnCesEplCfgIndex

Column	Syntax	OID
rbnCesEplCfgIndex This object is used to uniquely identify a set of CES excessive packet loss configuration.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2352.2.56.1.4.1.1
rbnCesEplCfgThreshold Threshold in percentage representing the upper limits of measurement for excessive packet loss. It is the ratio of (Total Lost Packets) / (Total Transmitted Packets)	RBN-TCRbnPercentager/w Type Constraints: range: 0..100	.1.3.6.1.4.1.2352.2.56.1.4.1.2
rbnCesEplCfgFaultDeclarationTime This object controls fault declaration time of excessive packet loss alarm. It is a successive duration that experience excessive packet loss defect.	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2352.2.56.1.4.1.3
rbnCesEplCfgClearingTime This object controls how excessive packet loss alarms are cleared. It is a successive periods of duration T that do not experience an excessive packet loss defect. Duration T is a system constant value which is 25 milli…	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2352.2.56.1.4.1.4
rbnCesEplCfgStatsResetAll Setting this object to 'true' resets all CES excessive packet loss statistic objects in the rbnCesEplStatsTable. This object always returns 'false' value.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.56.1.4.1.5
rbnCesEplCfgAdminStatus This object controls the CES excessive packet loss configurations. Setting this object to 'up' enables CES excessive packet loss monitoring on all CES circuits in the system; setting this object to 'down' disables the f…	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2352.2.56.1.4.1.6
rbnCesEplCfgRowStatus This object is used to manage the creation and deletion of CES excessive packet loss configuration conceptual rows. Except 'rbnCesEplCfgAdminStatus', 'read-create' objects in the conceptual row cannot be …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2352.2.56.1.4.1.7

CES excessive packet loss statistics table.

rbnCesEplStatsEntry row .1.3.6.1.4.1.2352.2.56.1.5.1

Each entry in this table represents a CES circuit.

Indexes

rbnCesEplStatsIndex

Column	Syntax	OID
rbnCesEplStatsIndex This object is used to uniquely identify a CES circuit. The value of this object should be the same as the value of ifIndex when they are used to identify the same CES circuit.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2352.2.56.1.5.1.1
rbnCesEplStatsEntryTime Date and time when the current excessive packet loss snapshot starts.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2352.2.56.1.5.1.2
rbnCesEplStatsEntryTotalPktLossTime The entry total packet loss time of current excessive packet loss snapshot.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2352.2.56.1.5.1.3
rbnCesEplStatsExitTime The exit packet loss time of current excessive packet loss snapshot.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2352.2.56.1.5.1.4
rbnCesEplStatsExitTotalPktLossTime The exit total packet loss time of current excessive packet loss snapshot.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2352.2.56.1.5.1.5
rbnCesEplStatsCount The total number of times when the CES PW was in the excessive packet loss state.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2352.2.56.1.5.1.6
rbnCesEplStatsTotalCircuitTime Total CES PW time including CES PW up time and time spent in excessive packet loss state.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2352.2.56.1.5.1.7
rbnCesEplStatsTotalFailureRate The percentage of time the CES PW spent in the excessive packet loss state during the total CES PW time.	RBN-TCRbnPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.2352.2.56.1.5.1.8
rbnCesEplStatsReset This object is used to reset CES EPL statistic objects in the entry. Setting this object to 'true' resets 'rbnCesEplStatsEntryTime' to current time and other CES EPL statistic objects to zero. The object always returns …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.56.1.5.1.9

CES Service Level Agreement information table.

rbnCesSlaInfoEntry row .1.3.6.1.4.1.2352.2.56.1.6.1

Each entry in this table represents a CES circuit that is in its
outage state.

Indexes

rbnCesSlaInfoIndex

Column	Syntax	OID
rbnCesSlaInfoIndex This object is used to uniquely identify a CES circuit. The value of this object should be the same as the value of ifIndex when they are used to identify the same CES interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2352.2.56.1.6.1.1
rbnCesSlaInfoLatestOutageTime The amount of time during the latest occurrence when the CES PW was in the packet loss or underrun state.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2352.2.56.1.6.1.2
rbnCesSlaInfoEntryLatestOutage Date and time of the most recent occurrence when the CES PW entered the packet loss or underrun state.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2352.2.56.1.6.1.3
rbnCesSlaInfoExitLatestOutage Date and time of the most recent occurrence when the CES PW exited the packet loss or underrun state.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2352.2.56.1.6.1.4
rbnCesSlaInfoLastOutageTime The duration of the previous occurrence(the one before the latest occurrence) when the CES PW was in the packet loss or underrun state.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2352.2.56.1.6.1.5
rbnCesSlaInfoLastUpTime Total CES PW up time before the latest outage occurred.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2352.2.56.1.6.1.6
rbnCesSlaInfoTotalOutageTime Total outage time since the CES PW was created.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2352.2.56.1.6.1.7
rbnCesSlaInfoTotalUpTime Total CES PW up time since it was created excluding the cumulative outage time.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2352.2.56.1.6.1.8
rbnCesSlaInfoOutageCount Number of times a CES PW outage occurred.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2352.2.56.1.6.1.9
rbnCesSlaInfoReset Setting this object to 'true' resets CES SLA objects to zero. The object always returns 'false' value.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.56.1.6.1.10

This table consists of CES specific card alarms. The alarms are used
to indicate CES card level communication errors. Other card alarms are
not included in the table.

rbnCesCardAlarmEntry row .1.3.6.1.4.1.2352.2.56.1.7.1

Each entry in this table represents a CES specific card alarm.

Indexes

rbnCesCardAlarmId

Column	Syntax	OID
rbnCesCardAlarmId This object is used to uniquely identify a CES card alarm.	RBN-ALARM-TCRbnAlarmId Type Values: 1 unknown 2 cpFail 3 cpBackplaneFail 4 diagFail 5 voltageFail 6 controllerSwitchFail 7 controllerTempCritical 8 controllerFail 9 controllerDiagFail 10 cpPowerOnDiagFail 11 controllerPowerOnDiagFail 12 cpOverheat 13 controllerOverheat 14 backplaneclkfail 15 btciferror 16 btcnotready 17 cpbackplanedegrade 18 cpcardcodemismatch 19 cpmismatch 20 cpmissing 21 cpresetcomplete 22 downloadcompleted 23 downloadfailed 24 syncfail 25 backupfail 26 controllercardcodemismatch 27 controllercardtypemismatch 28 controllermissing 30 controllerswitchauto 31 controllerswitchcompleted 32 controllerswitchexfailed 33 controllerswitchforced 34 controllerswitchmanual 35 localfantrayinventfail 36 localinventfail 37 localbackplaneinventfail 38 lostm2m 39 nonvolatilememfail 40 peerhwincompatible 41 peerinventfail 42 peermodeincompatible 43 peersharedformatmismatch 44 rtclockfail 45 mic1missing 46 mic2missing 47 mic1mismatch 48 mic2mismatch 49 mic1voltagefailure 50 mic2voltagefailure 51 mic1overheat 52 mic2overheat 53 mic1failure 54 mic2failure 55 mic1podfail 56 mic2podfail 57 mic1diagnosticfail 58 mic2diagnosticfail 59 ethtransceiverrxpowerhi 60 ethtransceiverrxpowerlo 61 ethtransceivertemphi 62 ethtransceivertemplo 63 ethtranceivervoltagehi 64 ethtranceivervoltagelo 65 ethtransceiverbiashi 66 ethtransceiverbiaslo 67 ethtransceivertxpowerhi 68 ethtransceivertxpowerlo 69 ethtransceiveraux1hi 70 ethtransceiveraux1lo 71 ethtransceiveraux2hi 72 ethtransceiveraux2lo 73 ethtransceiverlvcc5hi 74 ethtransceiverlvcc5lo 75 ethtransceiverlvcc3hi 76 ethtransceiverlvcc3lo 77 ethtransceiverlvcc2hi 78 ethtransceiverlvcc2lo 79 controllerbsdl2cacheerror 80 controllervxwl2cacheerror 81 fsServerDownAlarm 82 aseAsp1Down 83 aseAsp2Down 84 controllerSwNotSupported 85 cpbackplanerxerror 86 cpbackplanetxerror 87 asp1MissingServiceAssoc 88 asp2MissingServiceAssoc 89 cpDimmMismatch 90 cesPwOutage 91 cesLossOfConnectivity 92 controllerFallbackOfw 93 ethtransceiverunsupportedinport 94 ethtransceiverspeedmismatch 95 ethtransceiversoabiashi 96 ethtransceiversoabiaslo 97 ethtransceiversynceunsupported 98 ethtransceivermodulefailure 99 ethtransceivermodulemismatch 100 ethtransceiverlanelaserbiashi 101 ethtransceiverlanelaserbiaslo 102 ethtransceiverlanetemphi 103 ethtransceiverlanetemplo 104 ethtransceiverlanetxpowerhi 105 ethtransceiverlanetxpowerlo 106 ethtransceiverlanerxpowerhi 107 ethtransceiverlanerxpowerlo 10100 chassisInventoryFail 10101 chassisInsufficientPower 10102 chassisFabricRedundancyLost 10103 chassisSysFabricBandwithDegrade 10104 chassisNoFanTrays 10105 chassisEquipmentClockLostReference1 10106 chassisEquipmentClockLostReference2 10107 chassisEquipmentClockLostReference3 10108 chassisEquipmentClockLostReference4 10109 chassisEquipmentClockNoMoreReference 10110 chassisEquipmentClockQlBelowThreshold 10200 lcMissing 10201 lcMismatch 10202 lcInventoryFail 10203 lcUnreachable 10204 lcPayloadBootFail 10205 lcHardwareFail 10206 lcOosHardwareFail 10207 lcOosEjectorOpen 10208 lcInsufficientPower 10209 lcOosOverheat 10210 lcOverheatHot 10211 lcVoltageOutOfRange 10212 lcExtremeVoltageOutOfRange 10213 lcSoftwareFail 10214 lcPodFail 10215 lcOsdFail 10216 lcFabricLinkFail 10217 lcFabricBandwidthDegrade 10218 lcFileSystemFull 10219 lcExcessiveCpuUtilization 10220 lcExcessiveMemUtilization 10221 lcExcessiveEccErrors 10222 lcDown 10223 lcNpuFail 10224 lcDataPathCongestion 10225 lcEquipmentClockHardwareFail 10300 rpswMissing 10301 rpswMismatch 10302 rpswInventoryFail 10303 rpswUnreachable 10304 rpswPayloadBootFail 10305 rpswHardwareFail 10306 rpswOosHardwareFail 10307 rpswOosEjectorOpen 10308 rpswInsufficientPower 10309 rpswOosOverheat 10310 rpswOverheatHot 10311 rpswVoltageOutOfRange 10312 rpswExtremeVoltageOutOfRange 10313 rpswSoftwareFail 10314 rpswPodFail 10315 rpswOsdFail 10316 rpswSwitchManual 10317 rpswSwitchAuto 10318 rpswSwitchDone 10319 rpswSwitchFail 10320 rpswPeerIncompatible 10321 rpswSyncFail 10322 rpswMgmtLinkDown 10323 rpswFabricLinkFail 10324 rpswFabricFail 10325 rpswFileSystemFull 10326 rpswDown 10400 alswMissing 10401 alswMismatch 10402 alswInventoryFail 10403 alswUnreachable 10404 alswPayloadBootFail 10405 alswHardwareFail 10406 alswOosHardwareFail 10407 alswOosEjectorOpen 10408 alswInsufficientPower 10409 alswOosOverheat 10410 alswOverheatHot 10411 alswVoltageOutOfRange 10412 alswExtremeVoltageOutOfRange 10413 alswSoftwareFail 10414 alswPodFail 10415 alswOsdFail 10416 alswSwitchManual 10417 alswSwitchAuto 10418 alswSwitchDone 10419 alswSwitchFail 10420 alswPeerIncompatible 10421 alswFabricLinkFail 10422 alswFabricFail 10423 alswDown 10424 alswFrequencyRange 10500 swMissing 10501 swMismatch 10502 swInventoryFail 10503 swUnreachable 10504 swPayloadBootFail 10505 swHardwareFail 10506 swOosHardwareFail 10507 swOosEjectorOpen 10508 swInsufficientPower 10509 swOosOverheat 10510 swOverheatHot 10511 swVoltageOutOfRange 10512 swExtremeVoltageOutOfRange 10513 swSoftwareFail 10514 swPodFail 10515 swOsdFail 10516 swFabricLinkFail 10517 swFabricFail 10518 swDown 10800 sscAspDown 10801 sscAspMissingServiceAssoc 10802 sscAspApplicationSoftReset 10900 compDiskFail	.1.3.6.1.4.1.2352.2.56.1.7.1.1
rbnCesCardAlarmNotificationEnable This object indicates whether rbnCardAlarm notification is generated. If true, a notification is generated for the card alarm indicated by rbnCesCardAlarmId. Otherwise no notification is generated.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.56.1.7.1.2