raisecomRemoteL3Mask
RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB ·
.1.3.6.1.4.1.8886.1.13.1.13
Object
The subnet mask for this remote subnet. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's must be contiguous, starting with the left most bit.
Context
- MIB
- RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
- OID
.1.3.6.1.4.1.8886.1.13.1.13- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- raisecomRemoteManagementRemoteHideMibObjects
- Siblings
- 22
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| raisecomRemoteTemperature The current environment temperature of remote device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.13.1.1 |
| raisecomRemoteCommunityName The SNMPv1/v2c community name string in remote device.
In remote device's community table,the index of this community
is 3,and the view for this community is 'internet'. | scalar | OctetString | .1.3.6.1.4.1.8886.1.13.1.10 |
| raisecomRemoteCommunityPermission This object specifies the type of access allowed.
'readOnly(1)' allows GET operations (i.e., GET,
GET-NEXT, GET-BULK) and 'readWrite(2)' allows both
GET and SET operations. | scalar | Enumeration | .1.3.6.1.4.1.8886.1.13.1.11 |
| raisecomRemoteL3IpAddr The IP Address of remote device. This IP address
logically AND'ed with 'raisecomRemoteL3Mask' yields
the actual subnet value for this subnet.Set the object
as '0.0.0.0' means d… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.1.13.1.12 |
| raisecomRemoteL3VidIface This object contains the actual VLAN ID (VID) from 1 to 4094.
It is actually the management vlan of remote device. | scalar | Integer32 | .1.3.6.1.4.1.8886.1.13.1.14 |
| raisecomRemoteL3VidMemberPorts The set of ports which are permanently assigned to the egress
list for this VLAN by management.Changes to a bit in this object
affect the per-port per-VLAN Registrar control for … | scalar | SWITCH-TCPortList | .1.3.6.1.4.1.8886.1.13.1.15 |
| raisecomRemoteL3VidUntaggedPorts The set of ports which should transmit egress packets for this VLAN
as untagged. The default value of this object for the default VLAN
(dot1qVlanIndex = 1) is a string of appro… | scalar | SWITCH-TCPortList | .1.3.6.1.4.1.8886.1.13.1.16 |
| raisecomRemoteL3DefaultGateway With this object to Set or get default gateway of remote devices. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.1.13.1.17 |
| raisecomRemotePortTable A table of remote devices port properties. | table | - | .1.3.6.1.4.1.8886.1.13.1.18 |
| raisecomRemotePortStatsTable A table of remote devices port statistics. | table | - | .1.3.6.1.4.1.8886.1.13.1.19 |
| raisecomRemoteVolt3300 Current voltage value of 3.3v of remote device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.13.1.2 |
| raisecomRemoteVoltNormal This object specifies whether remote votage is in normal range or not. | scalar | Enumeration | .1.3.6.1.4.1.8886.1.13.1.20 |
| raisecomRemoteMaxAllowedFrameLength This object specifies max ethernet frame length of remote device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.13.1.21 |
| raisecomRemoteL3ObPortIpAddr The out IP Address of remote device. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.1.13.1.22 |
| raisecomRemoteL3ObPortMask The subnet mask for this remote subnet. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.1.13.1.23 |
| raisecomRemoteVolt2500 Current voltage value of 2.5v of remote device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.13.1.3 |
| raisecomRemoteVolt1800 Current voltage value of 1.8v of remote device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.13.1.4 |
| raisecomRemoteVolt1200 Current voltage value of 1.2v of remote device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.1.13.1.5 |
| raisecomRemoteSysOperation Specifies system command in remote device.Currently,support three
types command:reboot,write and erase.Reboot command is used to reset
remote device,write is used to save startup-… | scalar | Enumeration | .1.3.6.1.4.1.8886.1.13.1.6 |
| raisecomRemoteSysOperationState Specifies the state of this system operation to remote device. | scalar | Enumeration | .1.3.6.1.4.1.8886.1.13.1.7 |
| raisecomRemoteHostName Host name of Remote device. | scalar | OctetString | .1.3.6.1.4.1.8886.1.13.1.8 |
| raisecomRemoteOamNotificationEnable Specifies whether or not remote device send OAM notificaton frames. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.1.13.1.9 |