raisecomRemoteCommunityPermission

RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB · .1.3.6.1.4.1.8886.1.13.1.11
MIB view Table view

Object

scalar r/w Enumeration 
This object specifies the type of access allowed. 
'readOnly(1)' allows GET operations (i.e., GET, 
GET-NEXT, GET-BULK) and 'readWrite(2)' allows both 
GET and SET operations.

Context

MIB
RAISECOM-REMOTE-MANAGEMENT-REMOTE-MIB
OID
.1.3.6.1.4.1.8886.1.13.1.11
Type
scalar
Access
readwrite
Status
current
Parent
raisecomRemoteManagementRemoteHideMibObjects
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1readOnly
2readWrite
3invalid

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
raisecomRemoteTemperature
The current environment temperature of remote device.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.8886.1.13.1.1
raisecomRemoteCommunityName
The SNMPv1/v2c community name string in remote device. In remote device's community table,the index of this community is 3,and the view for this community is 'internet'.
scalarOctetString.1.3.6.1.4.1.8886.1.13.1.10
raisecomRemoteL3IpAddr
The IP Address of remote device. This IP address logically AND'ed with 'raisecomRemoteL3Mask' yields the actual subnet value for this subnet.Set the object as '0.0.0.0' means d…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.1.13.1.12
raisecomRemoteL3Mask
The subnet mask for this remote subnet. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's must be contiguous, …
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.1.13.1.13
raisecomRemoteL3VidIface
This object contains the actual VLAN ID (VID) from 1 to 4094. It is actually the management vlan of remote device.
scalarInteger32.1.3.6.1.4.1.8886.1.13.1.14
raisecomRemoteL3VidMemberPorts
The set of ports which are permanently assigned to the egress list for this VLAN by management.Changes to a bit in this object affect the per-port per-VLAN Registrar control for …
scalarSWITCH-TCPortList.1.3.6.1.4.1.8886.1.13.1.15
raisecomRemoteL3VidUntaggedPorts
The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appro…
scalarSWITCH-TCPortList.1.3.6.1.4.1.8886.1.13.1.16
raisecomRemoteL3DefaultGateway
With this object to Set or get default gateway of remote devices.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.1.13.1.17
raisecomRemotePortTable
A table of remote devices port properties.
table-.1.3.6.1.4.1.8886.1.13.1.18
raisecomRemotePortStatsTable
A table of remote devices port statistics.
table-.1.3.6.1.4.1.8886.1.13.1.19
raisecomRemoteVolt3300
Current voltage value of 3.3v of remote device.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.8886.1.13.1.2
raisecomRemoteVoltNormal
This object specifies whether remote votage is in normal range or not.
scalarEnumeration.1.3.6.1.4.1.8886.1.13.1.20
raisecomRemoteMaxAllowedFrameLength
This object specifies max ethernet frame length of remote device.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.8886.1.13.1.21
raisecomRemoteL3ObPortIpAddr
The out IP Address of remote device.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.1.13.1.22
raisecomRemoteL3ObPortMask
The subnet mask for this remote subnet.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.8886.1.13.1.23
raisecomRemoteVolt2500
Current voltage value of 2.5v of remote device.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.8886.1.13.1.3
raisecomRemoteVolt1800
Current voltage value of 1.8v of remote device.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.8886.1.13.1.4
raisecomRemoteVolt1200
Current voltage value of 1.2v of remote device.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.8886.1.13.1.5
raisecomRemoteSysOperation
Specifies system command in remote device.Currently,support three types command:reboot,write and erase.Reboot command is used to reset remote device,write is used to save startup-…
scalarEnumeration.1.3.6.1.4.1.8886.1.13.1.6
raisecomRemoteSysOperationState
Specifies the state of this system operation to remote device.
scalarEnumeration.1.3.6.1.4.1.8886.1.13.1.7
raisecomRemoteHostName
Host name of Remote device.
scalarOctetString.1.3.6.1.4.1.8886.1.13.1.8
raisecomRemoteOamNotificationEnable
Specifies whether or not remote device send OAM notificaton frames.
scalarSWITCH-TCEnableVar.1.3.6.1.4.1.8886.1.13.1.9