rbChannelConfiguredTxFrequency – RAINBOW-MIB

Object

column r/w SNMPv2-TCDisplayString

The configured Channel Tx Frequency (MHz).
Available values depend on Bandwidth and parameters of the Configured
Frequency Band in the Associated ODU.
For AUs that do not use diversity (rbAuDiversityMode is set to noDiversity),
if the Tx Frequency of one Channel is already configured,
the available values depend on the Bandwidth,
on the Tx Frequency defined for the already configured Channel,
and on the Frequency Bands included in the applicable Frequency Bands Group.
For AUs using diversity (rbAuDiversityMode other than noDiversity),
this value is configurable only for channel 1.
The Tx Frequency of other relevant channels (channel 2 for secondOrderDiversity,
channels 2 to 4 for fourthOrderDiversity) will be configured automatically to the value
configured for channel 1.
Will be applied after reset.

Context

MIB: RAINBOW-MIB
OID: .1.3.6.1.4.1.12394.1.2.2.11.1.7
Type: column
Access: readwrite
Status: current
Parent: rbChannelConfigEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbChannelConfiguredTxFrequency'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbChannelConfiguredTxFrequency.<rbSlotNumber>.<rbChannelId>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RAINBOW-MIB::rbChannelConfiguredTxFrequency'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints

range: 0..255