RAINBOW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
32
Rows
32
Columns
274

rbSlotConfigTable

table
.1.3.6.1.4.1.12394.1.2.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSlotConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSlotConfigTable' 
This table provides parameters common for all cards in chassis	slots.
It is retrieved with community NPU
rbSlotConfigEntry row .1.3.6.1.4.1.12394.1.2.2.1.1
Table entry
Indexes
Column Syntax OID
rbSlotNumber
Physical placement of the card in the chassis (the Slot number).
This is the table index {1 up to 9}.
Integer32
Constraints:
range: 1-9
 .1.3.6.1.4.1.12394.1.2.2.1.1.1
rbSlotDetectedCard
The auto detected card type. It also indicates whether the slot has a card
inserted in it or not.
Enumeration
Enumerated Values:
1notInstalled
2unknown
3au
4npu
 .1.3.6.1.4.1.12394.1.2.2.1.1.2
rbSlotConfiguredCard
The card type that is configured for the slot. In current version this is read_only
(AU is configured for slots 1-4 and 7-9, Slot 5 is NPU, slot 6 is Not Installed).
Enumerationr/w
Enumerated Values:
1notInstalled
2unknown
3au
4npu
 .1.3.6.1.4.1.12394.1.2.2.1.1.3
rbSlotAllowedCard
The card type that is allowed to be inserted in the specific slot.
In slots 1-4, 7-9 the allowed card is AU.
In slots 5 and the allowed card is NPU, although in the current version NPU can be used only in slot 5.
Enumeration
Enumerated Values:
1notInstalled
2unknown
3au
4npu
 .1.3.6.1.4.1.12394.1.2.2.1.1.4
rbSlotLedStatus
Not supported in current version.
This field represents summarized information about the card leds.
Each byte represents the single Led.
Within each byte, bits 0-3 are the color, 4-7 are the blink rate.
Supported color …
OctetString .1.3.6.1.4.1.12394.1.2.2.1.1.5
rbSlotFaultStatus
The severity of the card fault. This is summarized information regarding the card
healthiness in the slot. In case that there is no connection between NPU and
the card in the slot, status is disconnected
Enumeration
Enumerated Values:
1noFaults
2minor
3major
4critical
5disconnected
 .1.3.6.1.4.1.12394.1.2.2.1.1.6
rbSlotExtractorState
The current state of the card extractor - closed or opened.
In the current version this parameter is not supported and the status is always unknown.
Enumeration
Enumerated Values:
1closed
2opened
3unknown
 .1.3.6.1.4.1.12394.1.2.2.1.1.7

rbNpuConfigTable

table
.1.3.6.1.4.1.12394.1.2.2.2.1 · 1 row entry · 23 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbNpuConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbNpuConfigTable' 
This table provides NPU configuration parameters.
rbNpuConfigEntry row .1.3.6.1.4.1.12394.1.2.2.2.1.1
Table entry
Indexes
Column Syntax OID
rbNpuSerialNo
Serial number assigned for the card during the production time.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.1
rbNpuSysName
The name of the card; like System Name in MIB-II.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.2
rbNpuFaultStatus
The severity of the card fault. This is summarized information regarding the card
healthiness in the slot.
Enumeration
Enumerated Values:
1noFaults
2minor
3major
4critical
5disconnected
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.3
rbNpuHwRevision
Hardware revision of the card.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.4
rbNpuOperSwFileName
Operational (Main) Software File Name.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.5
rbNpuOperSwVersion
Operational (Main) Software Version.
OctetString
Constraints:
range: 0-50
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.6
rbNpuShadowSwFileName
Shadow Software File Name.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.7
rbNpuShadowSwVersion
Shadow Software Version.
OctetString
Constraints:
range: 0-50
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.8
rbNpuRunningSoftware
Current running software.
Enumeration
Enumerated Values:
1operational
2shadow
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.9
rbNpuOperVersionValidity
The validity of the Operational (Main) Software. Not supported in current version.
Enumeration
Enumerated Values:
1corrupted
2valid
3unknown
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.10
rbNpuShadowVersionValidity
The validity of the Shadow Software. Not supported in current version.
Enumeration
Enumerated Values:
1corrupted
2valid
3unknown
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.11
rbNpuRedundancyStatus
NPU redundancy status. This parameters is read only (always active) in current version.
Enumerationr/w
Enumerated Values:
1active
2standby
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.12
rbNpuUnitControl
If resetAndRunFromShadow (4) is selected, card should perform reset and
boot from the shadow software image.
If makeRunningVersionOperational (5) is selected and current running version is
marked as shadow, it should b…
Enumerationr/w
Enumerated Values:
1none
2reset
4resetAndRunFromShadow
5makeRunningVersionOperational
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.13
rbNpuSetDefaults
This parameter defines the way 'Default Group' parameters are initialised
with default values:
1 - Default values should not be copied to the Flash Memory,
2 - Full Factory Default configuration is copied to the Flash M…
Enumerationr/w
Enumerated Values:
1none
2factoryDefault
3partialDefault
4customerDefault
5partialCustomerDefault
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.14
rbNpuHwConfigDescription
NPU Hardware configuration description.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.15
rbNpuManagementInterface
The index of the NPU interface that can be used for management.
This parameters is read only in current version, and it is always 2 (both ports can be used for management).
Enumerationr/w
Enumerated Values:
1managementPort
2managementAndDataPort
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.16
rbNpuCreateConfigFile
Not applicable for Version 2 and higher.
This variable is used to instruct the NPU to create file containing
the Base Station configuration. Variable contains the name of file.
In version 1.0 file name is ignored by the…
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.17
rbNpuCreateBackupConfigFile
This variable is used to instruct the NPU to create file containing
the Base Station configuration.
cfgFileFull (1) is used for creating full backup files, name of the
configuration file is always backup.res;
cfgFilePr…
Enumerationr/w
Enumerated Values:
0cfgFileNone
1cfgFileFull
2cfgFileProfiles
3cfgFileProfilesServices
4cfgFileFiltering
5cfgFileTraps
6cfgFileNmsSync
7cfgFileSUSync
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.18
rbNpuCumulativePowerOnTime
Cumulative Power On Time (minutes).
Agent will return 0 if Cumulative Power On Time is unknown.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.19
rbNpuBootSwVersion
Boot Software Version.
OctetString
Constraints:
range: 0-50
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.20
rbNpuTemperature
NPU Messured Temperature.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.21
rbNpuDrapTtlRetries
NPU DRAP TTL Retries.
Sets the limit of TTL retries for gateways that support the DRAP protocol
before concluding that the gateway is no longer active and removing it from the database.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.22
rbNpuRedundantCPLDVersion
NPU Redundant CPLD Version. The Redundant CPLD is needed to enable GPS support.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.12394.1.2.2.2.1.1.23

rbFrequencyBandsTable

table
.1.3.6.1.4.1.12394.1.2.2.2.3.2 · 1 row entry · 8 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbFrequencyBandsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbFrequencyBandsTable' 
A table that holds the main details of the bands in the current Frequency Bands File.
rbFrequencyBandsEntry row .1.3.6.1.4.1.12394.1.2.2.2.3.2.1
Table entry
Indexes
Column Syntax OID
rbFrequencyBandId
The ID of the Frequency Band.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.2.2.3.2.1.1
rbFrequencyBandName
The name of the Frequency Band.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.12394.1.2.2.2.3.2.1.2
rbFrequencyBandRevision
The revision of the Frequency Band.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.12394.1.2.2.2.3.2.1.3
rbFrequencyBandGroupId
The Group ID of the Frequency Band.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.2.2.3.2.1.4
rbFrequencyBandStartFrequency
Downlink Start Frequency [MHz].
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.2.2.3.2.1.5
rbFrequencyBandStopFrequency
Downlink Stop Frequency [MHz].
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.2.2.3.2.1.6
rbFrequencyBandStep
The Frequency resolution [MHz].
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.2.2.3.2.1.7
rbFrequencyBandDuplexSeparation
Duplex Frequency Separation [MHz].
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.2.2.3.2.1.8

rbAuConfigTable

table
.1.3.6.1.4.1.12394.1.2.2.3 · 1 row entry · 31 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbAuConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbAuConfigTable' 
This table provides Access Unit configuration parameters.
rbAuConfigEntry row .1.3.6.1.4.1.12394.1.2.2.3.1
Table entry
Indexes
Column Syntax OID
rbAuSerialNo
Serial number assigned for the card during the production time.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.3.1.1
rbAuSysName
Logical card ID, providing unique identification of the card.
Note that SysName for AU is not supported by MIB II (as well as SysLocation and SysContact).
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.12394.1.2.2.3.1.2
rbAuFaultStatus
The severity of the card fault. This is summarized information regarding the card
healthiness in the slot.
Enumeration
Enumerated Values:
1noFaults
2minor
3major
4critical
5disconnected
 .1.3.6.1.4.1.12394.1.2.2.3.1.3
rbAuIduTemperature
AU-IDU Temperature (Celsius).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.2.3.1.4
rbAuIduHwRevision
Hardware revision of the AU-IDU card.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.3.1.5
rbAuOperSwFileName
Operational (Main) Software File Name.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.12394.1.2.2.3.1.6
rbAuOperSwVersion
Operational (Main) Software Version.
OctetString
Constraints:
range: 0-50
 .1.3.6.1.4.1.12394.1.2.2.3.1.7
rbAuShadowSwFileName
Shadow Software File Name.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.12394.1.2.2.3.1.8
rbAuShadowSwVersion
Shadow Software Version.
OctetString
Constraints:
range: 0-50
 .1.3.6.1.4.1.12394.1.2.2.3.1.9
rbAuRunningSoftware
Current running software.
Enumeration
Enumerated Values:
1operational
2shadow
3unknown
 .1.3.6.1.4.1.12394.1.2.2.3.1.10
rbAuUnitControl
If reset (2) is selected, the AU should perform reset
and resume running from the current version.
Reset is applicable only for an installed AU, and it does not affect the database
(Get will return the previously selec…
Enumerationr/w
Enumerated Values:
1none
2reset
3putToShadow
4resetAndRunFromShadow
5makeRunningVersionOperational
 .1.3.6.1.4.1.12394.1.2.2.3.1.11
rbAuOperVersionValidity
The validity of the Operational (Main) Software. Not supported in current version.
Enumeration
Enumerated Values:
1corrupted
2valid
3unknown
 .1.3.6.1.4.1.12394.1.2.2.3.1.12
rbAuShadowVersionValidity
The validity of the Shadow Software. Not supported in current version.
Enumeration
Enumerated Values:
1corrupted
2valid
3unknown
 .1.3.6.1.4.1.12394.1.2.2.3.1.13
rbAuSetDefaults
This parameter defines the way 'Default Group' parameters are initialised
with default values:
1 - Default values should not be copied to the Flash Memory,
2 - Full Factory Default configuration is copied to the Flash M…
Enumerationr/w
Enumerated Values:
1none
2factoryDefault
3partialDefault
4customerDefault
5partialCustomerDefault
 .1.3.6.1.4.1.12394.1.2.2.3.1.14
rbAuIduHwConfigDescription
AU IDU Hardware configuration description
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.2.3.1.15
rbAuOduHwConfigDescription
AU ODU Hardware configuration description.
Not applicable for Version 2 and higher.
For Version 2 it should return the value for the ODU connected to Channel 1.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.2.3.1.16
rbAuUpgradeSwFileName
The name of the software file that should be used to upgrade AU software
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.12394.1.2.2.3.1.17
rbAuOduHwRevision
AU ODU Hardware revision. Not applicable for Version 2 and higher.
For Version 2 it should return the value for the ODU connected to Channel 1.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.2.3.1.18
rbAuMaxNumberOfCalls
The maximum number of voice calls supported by AU.
Integer32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.12394.1.2.2.3.1.19
rbAuNumberOfRegisteredSUs
The number of registered SUs currently connected to this AU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.2.3.1.20
rbAuAirInterfaceType
AU Operation Mode.
typeA (1) - Standard Operation Mode, typeSi (2) - Advance Si Operation Mode.
Enumeration
Enumerated Values:
0unknown
1typeA
2typeSi
 .1.3.6.1.4.1.12394.1.2.2.3.1.21
rbAuCumulativePowerOnTime
Cumulative Power On Time (minutes).
Agent will return 0 if Cumulative Power On Time is unknown.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.2.3.1.22
rbAuBeStarvationProtectLevelCurrentdeprecated
Not supported in current version.
The Starvation Protection Level in Kbps for Best Effort connections.
The system will maintain the throughput of all BE connections at
least to this level (or to the MIR value if lower …
Integer32
Constraints:
range: 0-250
 .1.3.6.1.4.1.12394.1.2.2.3.1.23
rbAuBeStarvationProtectLevelConfigdeprecated
Not supported in current version.
The configured Starvation Protection Level in Kbps for Best Effort connections.
Will take effect (become current) after next reset.
Integer32r/w
Constraints:
range: 0-250
 .1.3.6.1.4.1.12394.1.2.2.3.1.24
rbAuNrtStarvationProtectLevelCurrentdeprecated
Not supported in current version.
The Starvation Protection Level in Kbps for Non Real Time connections.
The system will maintain the throughput of all NRT connections at
least to this level (or to the CIR value if low…
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.12394.1.2.2.3.1.25
rbAuNrtStarvationProtectLevelConfigdeprecated
Not supported in current version.
The configured Starvation Protection Level in Kbps for Best Effort connections.
Will take effect (become current) after next reset.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.12394.1.2.2.3.1.26
rbAuActiveVoiceCalls
The number of active voice calls in the sector.
Actual range is from 0 to the value defined by rbAuMaxNumberOfCalls.
Integer32
Constraints:
range: 0-300
 .1.3.6.1.4.1.12394.1.2.2.3.1.27
rbAuSuUpgradeSwFileName
The name of the software file that should be used to upgrade SU software upon network entry
for all SUs in this sector. Not applicable for any SU whose rbSuUpgradeSwFileName is not empty.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.12394.1.2.2.3.1.28
rbAuSuUpgradeSwAction
The Action that should be performed by SUs in this sector upon
the Network Entry. Action should be performed using the rbAuSuUpgradeSwFileName.
Not applicable for any SU whose rbSuUnitControl is other than none (1).
Enumerationr/w
Enumerated Values:
1none
3putToShadow
4runFromShadow
5makeShadowOperational
 .1.3.6.1.4.1.12394.1.2.2.3.1.29
rbAuClearAllSuSwUpgradeParams
Clears the SW Upgrade parameters for all SUs in the sector:
For all SUs, rbSuUpgradeSwFileName will be set to an empty string,
and rbSuUnitControl will be set to none (1).
none (1) value is available to support Get and …
Enumerationr/w
Enumerated Values:
1none
2clearAllSuSwUpgradeParams
 .1.3.6.1.4.1.12394.1.2.2.3.1.30
rbAuDiversityMode
The diversity mode used by the AU:
noDiversity (1): No diversity (multi-channels).
secondOrder (2): Second order diversity using channels 1 and 2.
fourthOrder (3): Fourth order diversity, using all 4 channels.
Change…
Enumerationr/w
Enumerated Values:
1noDiversity
2secondOrder
3fourthOrder
 .1.3.6.1.4.1.12394.1.2.2.3.1.31

rbPsuConfigTable

table
.1.3.6.1.4.1.12394.1.2.2.7 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbPsuConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbPsuConfigTable' 
This table provides Power Supply Unit configuration parameters
rbPsuConfigEntry row .1.3.6.1.4.1.12394.1.2.2.7.1
Table entry
Indexes
Column Syntax OID
rbPsuNumber
Physical placement of the PSU.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.12394.1.2.2.7.1.1
rbPsuStatus
PSU fault status.
Enumeration
Enumerated Values:
1ok
2fault
3notInstalled
 .1.3.6.1.4.1.12394.1.2.2.7.1.2

rbPiuConfigTable

table
.1.3.6.1.4.1.12394.1.2.2.8 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbPiuConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbPiuConfigTable' 
This table provides Power Interface Unit configuration parameters.
rbPiuConfigEntry row .1.3.6.1.4.1.12394.1.2.2.8.1
Table entry
Indexes
Column Syntax OID
rbPiuNumber
Physical placement of the PIU.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.12394.1.2.2.8.1.1
rbPiuStatus
PIU fault status.
Enumeration
Enumerated Values:
1ok
2fault
3unknown
 .1.3.6.1.4.1.12394.1.2.2.8.1.2
rbPiuMode
PIU mode.
Enumeration
Enumerated Values:
1master
2redundant
3notInstalled
 .1.3.6.1.4.1.12394.1.2.2.8.1.3

rbAuHwComponentsInfoTable

table
.1.3.6.1.4.1.12394.1.2.2.9 · 1 row entry · 7 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbAuHwComponentsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbAuHwComponentsInfoTable' 
This table provides parameters information regarding the AU Hardware components.
rbAuHwComponentsInfoEntry row .1.3.6.1.4.1.12394.1.2.2.9.1
Table entry
Indexes
Column Syntax OID
rbAuIduIfCardRevision
AU-IDU IF Card Revision.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.9.1.1
rbAuIduIfCardConfiguration
AU-IDU IF Card Configuration description.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.9.1.2
rbAuIduBootVersion
AU-IDU Boot Version.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.9.1.3
rbAuOduHC08Version
AU ODU HC08 Version. Not applicable for Version 2 and higher.
For Version 2 it should return the value for the ODU connected to Channel 1.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.9.1.4
rbAuOduCpldVersion
AU ODU Cpld Version. Not applicable for Version 2 and higher.
For Version 2 it should return the value for the ODU connected to Channel 1.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.9.1.5
rbAuOduCardSerialNumber
AU ODU serial number. Not applicable for Version 2 and higher.
For Version 2 it should return the value for the ODU connected to Channel 1.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.9.1.6
rbAuIduType
AU-IDU Type. fourChannels and twoChannels-HP are not applicable in the current version.
Enumeration
Enumerated Values:
0unknown
1twoChannels
2fourChannels
3twoChannels-HP
4fourChannels-HP
 .1.3.6.1.4.1.12394.1.2.2.9.1.7

rbChannelConfigTable

table
.1.3.6.1.4.1.12394.1.2.2.11 · 1 row entry · 9 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbChannelConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbChannelConfigTable' 
This table provides Channel configuration parameters. 
This is a static Table. Only Update allowed.
rbChannelConfigEntry row .1.3.6.1.4.1.12394.1.2.2.11.1
Table entry
Indexes
Column Syntax OID
rbChannelId
Channel ID. For two-channels AU-IDU only Channel ID 1-2 are supported.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.12394.1.2.2.11.1.1
rbChannelAssociatedRadioClusterId
Channel Associated Radio Cluster ID, as defined in the Associated ODU.
Agent will return 0 if Associated Radio Cluster ID is unknown.
Integer32
Constraints:
range: 0-6
 .1.3.6.1.4.1.12394.1.2.2.11.1.2
rbChannelAssociatedOduId
Channel Associated ODU ID. Valid values: 1 to 24 or 0 to disassociate.
Agent will return 0 if Associated ODU ID is unknown.
Integer32r/w
Constraints:
range: 0-24
 .1.3.6.1.4.1.12394.1.2.2.11.1.3
rbChannelTxFrequency
The current Channel Tx Frequency (MHz).
Agent will return 0 if Tx Frequency is unknown.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.11.1.4
rbChannelRxFrequency
Channel Rx Frequency (MHz). Calculated from the Tx Frequency according to
the parameters of the Configured Frequency Band in the Associated ODU.
Agent will return 0 if Rx Frequency is unknown.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.11.1.5
rbChannelAdminStatus
Channel Administrative Status. Valid values: 1 to 2
Agent will return 0 if Admin Status is unknown.
For AUs using diversity (rbAuDiversityMode other than noDiversity),
this parameter is read-write only for Channel 1.
T…
Enumerationr/w
Enumerated Values:
0unknown
1enable
2disable
 .1.3.6.1.4.1.12394.1.2.2.11.1.6
rbChannelConfiguredTxFrequency
The configured Channel Tx Frequency (MHz).
Available values depend on Bandwidth and parameters of the Configured
Frequency Band in the Associated ODU.
For AUs that do not use diversity (rbAuDiversityMode is set to noDiv…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.2.11.1.7
rbChannelOduActualFrequencyBand
Odu Actual Frequency Band ID.
Must be one of the Frequency Band IDs available in the Frequency Bands Table.
Agent will return 0 if Frequency Band is unknown.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.2.11.1.8
rbChannelOperStatus
Channel Operational Status.
Agent will return 0 if Oper Status is unknown.
Enumeration
Enumerated Values:
0unknown
1up
2down
 .1.3.6.1.4.1.12394.1.2.2.11.1.9

rbRegisteredSuTable

table
.1.3.6.1.4.1.12394.1.2.5.1 · 1 row entry · 35 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbRegisteredSuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbRegisteredSuTable' 
This table contains information on SUs registered in the system.
It includes also SUs that are defined but are not registered currently.
It can also be used to define new SUs.
rbRegisteredSuEntry row .1.3.6.1.4.1.12394.1.2.5.1.1
Table entry
Indexes
Column Syntax OID
rbAuId
The slot number of the AU to which the SU is connected.
For a Micro Base Station AU ID is 1.
If the SU is still not registered - AU ID is 255.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.5.1.1.1
rbSuMacAddr
The MAC address of the SU.
For registered SUs this parameter is read-only.
The MAC address is read-write for SUs that are not registered,
enabling pre-definition of new SUs.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.12394.1.2.5.1.1.2
rbSuID
SU ID. An index assigned by the serving device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.5.1.1.3
rbSuRegistrationState
The registration state of the SU.
Enumeration
Enumerated Values:
1notRegistered
2registered
3authenticated
 .1.3.6.1.4.1.12394.1.2.5.1.1.4
rbSuPersistence
The permanence status of the SU.
A new SU that becomes registered at the Device, is automatically added to
the database with a Temporary status. If the Device uses Advanced (professional)
Service Working Mode, and the …
Enumerationr/w
Enumerated Values:
1temporary
2permanent
 .1.3.6.1.4.1.12394.1.2.5.1.1.5
rbSuSerialNo
Serial number assigned for the SU during the production time.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.5.1.1.6
rbSuSysName
The SU's name. User Name in SUs using Advanced Si Operation Mode (Air Interface type Si)).
Configurable (write) only for SUs running SW version 2.0 or higher and using Standard Operation Mode (Air Interface type A).
Not…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.12394.1.2.5.1.1.7
rbSuFaultStatus
The severity of the SU's fault.
This is summarized information regarding the unit's healthiness.
Enumeration
Enumerated Values:
1noFaults
2minor
3major
4critical
5disconnected
 .1.3.6.1.4.1.12394.1.2.5.1.1.8
rbSuHwRevision
Hardware version of the SU's Main card.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.5.1.1.9
rbSuOperSwFileName
Operational (Main) Software File Name.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.12394.1.2.5.1.1.10
rbSuOperSwVersion
Operational (Main) Software Version.
OctetString
Constraints:
range: 0-50
 .1.3.6.1.4.1.12394.1.2.5.1.1.11
rbSuShadowSwFileName
Shadow Software File name.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.12394.1.2.5.1.1.12
rbSuShadowSwVersion
Shadow Software Version.
OctetString
Constraints:
range: 0-50
 .1.3.6.1.4.1.12394.1.2.5.1.1.13
rbSuRunningSoftware
Current running software.
Enumeration
Enumerated Values:
1operational
2shadow
3unknown
 .1.3.6.1.4.1.12394.1.2.5.1.1.14
rbSuOperVersionValidity
The validity of the Operational (Main) Software.
Enumeration
Enumerated Values:
1corrupted
2valid
3unknown
 .1.3.6.1.4.1.12394.1.2.5.1.1.15
rbSuShadowVersionValidity
The validity of the Shadow Software. Not supported in current version.
Enumeration
Enumerated Values:
1corrupted
2valid
3unknown
 .1.3.6.1.4.1.12394.1.2.5.1.1.16
rbSuUnitControl
If reset (2) is selected, the SU should perform reset
and resume running from the current version.
Reset is applicable only for a connected SU, and it does not affect the database
(Get will return the previously selecte…
Enumerationr/w
Enumerated Values:
1none
2reset
3putToShadow
4resetAndRunFromShadow
5makeRunningVersionOperational
 .1.3.6.1.4.1.12394.1.2.5.1.1.17
rbSuSetDefaults
This parameter defines the way 'Default Group' parameters are initialised
with default values:
1 - Default values should not be copied to the Flash Memory,
2 - Full Factory Default configuration is copied to the Flash M…
Enumerationr/w
Enumerated Values:
1none
2factoryDefault
3partialDefault
4customerDefault
5partialCustomerDefault
 .1.3.6.1.4.1.12394.1.2.5.1.1.18
rbSuAllowedUsersTypedeprecated
Not supported in current version.
Enumerationr/w
Enumerated Values:
1residentional
2unknown
 .1.3.6.1.4.1.12394.1.2.5.1.1.19
rbSuAllowedQoSdeprecated
Not supported in current version.
Enumerationr/w
Enumerated Values:
1residentional
2unknown
 .1.3.6.1.4.1.12394.1.2.5.1.1.20
rbSuAllowedServicedeprecated
Not supported in current version.
OctetStringr/w .1.3.6.1.4.1.12394.1.2.5.1.1.21
rbSuRowStatus
Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and
relevant parameters may be modified;
createAndGo (4) is …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12394.1.2.5.1.1.22
rbSuInstallerPassword
The password that should be used when accessing the SU's Monitor program
using Telnet via its Ethernet port.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.12394.1.2.5.1.1.23
rbSuHwConfigDescription
The Hardware configuration description of the SU's Main card.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.5.1.1.24
rbSuUpgradeSwFileName
The name of the software file that should be used to upgrade SU software.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.12394.1.2.5.1.1.25
rbSuServiceTypedeprecated
Not supported in current version.
Enumerationr/w
Enumerated Values:
1suData
2suVoice
 .1.3.6.1.4.1.12394.1.2.5.1.1.26
rbSuIduType
The type of SU IDU. In current version only basic (0) and ngData4Wireless (11) are supported.
Enumeration
Enumerated Values:
0basic
6vgData4Voice2
11ngData4Wireless
 .1.3.6.1.4.1.12394.1.2.5.1.1.27
rbSuExternalDevNumber
The number of gateways (including ngData4Wireless IDU) connected to SU.
This includes only devices that support the DRAP protocol for registration
at the Base Station/Micro Base Station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.5.1.1.28
rbSuServiceFaultBitMap
The reason for denying services to the SU.
Bit 1: Loop problem. A loop was detected on the Ethernet side of the SU.
rbNetworkingError Trap will be sent, and services to this SU will be denied
until resetting the SU fr…
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.12394.1.2.5.1.1.29
rbSuCumulativePowerOnTime
Cumulative Power On Time (minutes).
Agent will return 0 if Cumulative Power On Time is unknown.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.5.1.1.30
rbSuOrganizationName
SU's organization name as defined in the SU.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.12394.1.2.5.1.1.31
rbSuAddress
The SU's address as defined in the SU.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.12394.1.2.5.1.1.32
rbSuCountry
The SU's country as defined in the SU.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.12394.1.2.5.1.1.33
rbSuMACControlNumber
Least Significant Byte of the Integer computed by summarizing the
values of the 12 hexadecimal digits of the MAC Address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.5.1.1.34
rbSuAirInterfaceType
SU Operation Mode.
typeA (1) - Standard Operation Mode, typeSi (2) - Advance Si Operation Mode.
Enumeration
Enumerated Values:
0unknown
1typeA
2typeSi
 .1.3.6.1.4.1.12394.1.2.5.1.1.35

rbSuSubDevicesTable

table
.1.3.6.1.4.1.12394.1.2.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSuSubDevicesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSuSubDevicesTable' 
This table contains IP Addresse of Gateways that support DRAP
that are connected to SUs.
To receive the Gateways connected to a specific SU, community 
<com>@SU.<MacAddress> should be used in Get Next command.
rbSuSubDevicesEntry row .1.3.6.1.4.1.12394.1.2.5.2.1
Table entry
Indexes
Column Syntax OID
rbSubDeviceIpAddress
IP Address of the Gateway connected to an SU.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.2.5.2.1.1
rbSuMacAddress
MAC Address of the SU.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.12394.1.2.5.2.1.2
rbSubDeviceType
The type of Gateway.
Enumeration
Enumerated Values:
0unknown
4vgDataVoice
5vgData1Voice1
6vgData4Voice2
7vgDataVoice2
11ngData4Wireless
23winetworksMSG
 .1.3.6.1.4.1.12394.1.2.5.2.1.3
rbSubDeviceVlanID
The management VLAN ID used by the Gateway.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.5.2.1.4

rbSuHwComponentsInfoTable

table
.1.3.6.1.4.1.12394.1.2.5.3 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSuHwComponentsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSuHwComponentsInfoTable' 
This table provides parameters information regarding the SU Hardware components.
rbSuHwComponentsInfoEntry row .1.3.6.1.4.1.12394.1.2.5.3.1
Table entry
Indexes
Column Syntax OID
rbSuRfCardRevision
SU RF Card Revision.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.5.3.1.1
rbSuRfCardConfigurationdeprecated
SU RF Card Configuration description. Not supported in current version.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.5.3.1.2
rbSuBootVersion
SU Boot Version.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.5.3.1.3
rbSuType
SU Type.
Enumeration
Enumerated Values:
0unknown
1cpe
2cpePro
3cpeSi
4cpeProL
5cpeSiL
6cpe2Pro
7cpe2Si
8cpe2ProL
9cpe2SiL
 .1.3.6.1.4.1.12394.1.2.5.3.1.4

rbMACBehindSUListTable

table
.1.3.6.1.4.1.12394.1.2.5.5.1 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbMACBehindSUListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbMACBehindSUListTable' 
This table provides information regarding the MAC Addresses and VLAN IDs of devices behind the SU.
rbMACBehindSUListEntry row .1.3.6.1.4.1.12394.1.2.5.5.1.1
Table entry
Indexes
Column Syntax OID
rbMacBehindSuAddr
MAC Address of a device behind the SU.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.12394.1.2.5.5.1.1.1
rbMacBehindSuVlan
The VLAN ID used by the device (a device may use more than one VLAN ID, or none.
If more than one VLAN ID is used, this will be the first identified VLAN ID).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.5.5.1.1.2

rbSiSuInfoTable

table
.1.3.6.1.4.1.12394.1.2.5.6.1 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSiSuInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSiSuInfoTable' 
This table provides parameters information regarding the Self-Install SU.
rbSiSuInfoEntry row .1.3.6.1.4.1.12394.1.2.5.6.1.1
Table entry
Indexes
Column Syntax OID
rbSiSuAntennaSelection
The antenna(s) that can be used in the SI CPE.
Enumeration
Enumerated Values:
0unknown
1internal1
2internal2
3internal3
4internal4
5internal5
6internal6
7external
8automatic
 .1.3.6.1.4.1.12394.1.2.5.6.1.1.1
rbSiSuSmartCardStatus
The Smart card status.
Enumeration
Enumerated Values:
0unknown
1installed
2notInstalled
3fault
 .1.3.6.1.4.1.12394.1.2.5.6.1.1.2
rbSiSuInterfaceType
The interface type.
Enumeration
Enumerated Values:
0unknown
1ethernet
2usb
 .1.3.6.1.4.1.12394.1.2.5.6.1.1.3

rbSuLicensesTable

table
.1.3.6.1.4.1.12394.1.2.5.7.1 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSuLicensesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSuLicensesTable' 
This table provides information about License(s) registered for the SU.
It will include up to 5 entries - Maximum License Count per SU. 
This table will only be applicable for L(Limitted Capabilities) model units.
rbSuLicensesEntry row .1.3.6.1.4.1.12394.1.2.5.7.1.1
Table entry.
Indexes
Column Syntax OID
rbSuLicenseIdx
SU License Table Index.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.12394.1.2.5.7.1.1.1
rbSuLicenseId
SU License ID. Currently the only supported value is 1 for Bandwidth.
Enumerationr/w
Enumerated Values:
1bandwidth
 .1.3.6.1.4.1.12394.1.2.5.7.1.1.2
rbSuLicenseValue
SU License Value. Currently the only supported value is 0 for Unlimited Bandwidth.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.5.7.1.1.3

rbAuthorizedManagersTable

table
.1.3.6.1.4.1.12394.1.2.6.1 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbAuthorizedManagersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbAuthorizedManagersTable' 
This table defines the stations that are authorized to manage the device.
Up to 10 Authorized Managers can be defined.
rbAuthorizedManagersEntry row .1.3.6.1.4.1.12394.1.2.6.1.1
Table entry
Indexes
Column Syntax OID
authMngrIpAddr
IP address of the Authorized Management Station
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.2.6.1.1.1
authMngrReadCommunity
Authorized Management Station Community for Read operations.
In case that trap transmission is enabled, trap message is send
with this community.
OctetStringr/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.12394.1.2.6.1.1.2
authMngrWriteCommunity
Authorized Management Station Community for Write operations.
OctetStringr/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.12394.1.2.6.1.1.3
authMngrTrapEnable
When set to enable, device transmits trap to the Authorized Manager.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.12394.1.2.6.1.1.4
authMngrRowStatus
Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device and
relevant parameters may be modified;
createAndGo (4) is u…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12394.1.2.6.1.1.5

rbTrapConfigTable

table
.1.3.6.1.4.1.12394.1.2.6.2 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbTrapConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbTrapConfigTable' 
This table defines configuration parameters for each trap supported by device.
rbTrapConfigEntry row .1.3.6.1.4.1.12394.1.2.6.2.1
Table entry
Indexes
Column Syntax OID
trapEnterprizeId
Identification of the MIB where the trap is defined.
Enumeration
Enumerated Values:
1snmp
2rainbow
3other
 .1.3.6.1.4.1.12394.1.2.6.2.1.1
trapId
Trap ID defined in the TRAP-TYPE macro in the corresponding MIB.
For snmp trapEnterprizedId:
1 - coldStart ,
2 - warmStart ,
3 - linkDown ,
4 - linkUp ,
5 - authenticationFailure,
6 - egpNeighborLoss
Integer32
Constraints:
range: 0-256
 .1.3.6.1.4.1.12394.1.2.6.2.1.2
trapEnable
Enable/disable transmission of the trap.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.12394.1.2.6.2.1.3
trapSeverity
Trap severity.
TrapSeverityr/w
Type Values:
0none
1critical
2major
3minor
4warning
5info
 .1.3.6.1.4.1.12394.1.2.6.2.1.4
trapSuppressionInterval
The interval in seconds during which transmission of identical traps should
be supressed by the device. 0 means trap suppression is disabled.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.12394.1.2.6.2.1.5

rbTrapThresholdsTable

table
.1.3.6.1.4.1.12394.1.2.6.20 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbTrapThresholdsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbTrapThresholdsTable' 
This table defines thresholds for specific counters. Trap is transmitted
if counter passes the threshold. Not supported in current version.
rbTrapThresholdsEntry row .1.3.6.1.4.1.12394.1.2.6.20.1
Table entry
Indexes
Column Syntax OID
counterId
Identification of the counter
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.12394.1.2.6.20.1.1
counterName
String representing the name of the counter, as it is defined in the MIB
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.6.20.1.2
counterType
Type of the counter
Enumerationr/w
Enumerated Values:
1integer
2string
 .1.3.6.1.4.1.12394.1.2.6.20.1.3
counterIntValue
Counter value in Integer format
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.6.20.1.4
counterStringValue
Counter value in String format
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.6.20.1.5

rbTrapEventLogTable

table
.1.3.6.1.4.1.12394.1.2.6.21 · 1 row entry · 10 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbTrapEventLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbTrapEventLogTable' 
This table containes trap information for the last 1000 traps.
rbTrapEventLogEntry row .1.3.6.1.4.1.12394.1.2.6.21.1
Table entry
Indexes
Column Syntax OID
trapEventLogSeqNum
The trap sequential number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.6.21.1.1
trapEventLogId
The trap ID defined in the TRAP-TYPE macro.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.6.21.1.2
trapEventLogSeverity
The trap severity.
TrapSeverity
Type Values:
0none
1critical
2major
3minor
4warning
5info
 .1.3.6.1.4.1.12394.1.2.6.21.1.3
trapEventLogType
Trap ID defined in the TRAP-TYPE macro: 0 to 5 for the snmp MIB or 6 for other MIBs.
Enumeration
Enumerated Values:
0coldStart
1warmStart
2linkDown
3linkUp
4authenticationFailure
5egpNeighborLoss
6enterpriseSpecific
 .1.3.6.1.4.1.12394.1.2.6.21.1.4
trapEventLogCategory
The trap category according to the X.733.
Enumeration
Enumerated Values:
0none
1communications
2qualityOfService
3processingError
4equipment
5environmental
 .1.3.6.1.4.1.12394.1.2.6.21.1.5
trapEventLogSource
Trap source entity :
<NPU.Slot#>,
<AU.Slot#>,
<SU.MacAddress>,
<BS>,
<PSU#>,
<PIU#>,
<ACU#>,
<ACU-FAN.Slot#>,
<RC.RadioClusterId#>,
<ODU.OduConfigId#>,
<CHNL.AuSlot#.ChannelId#>,
<SBSCR.SubscriberIdx#>,
<SRVC.PipeIdx#>,…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.6.21.1.6
trapEventLogVarBindNumber
The trap Variable Bind Number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.6.21.1.7
trapEventLogVarBindSize
The trap Variable Bind Size.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.6.21.1.8
trapEventLogAddVarAttributes
The trap Variable Attributes Additional information.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.6.21.1.9
trapEventLogDateAndTime
The trap Date And Time.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.6.21.1.10

rbTrapAlarmLogTable

table
.1.3.6.1.4.1.12394.1.2.6.22 · 1 row entry · 12 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbTrapAlarmLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbTrapAlarmLogTable' 
This table containes trap information for all alarms.
For traps that are not active the trapAlarmLogAddVarAttributes is NA.
rbTrapAlarmLogEntry row .1.3.6.1.4.1.12394.1.2.6.22.1
Table entry
Indexes
Column Syntax OID
trapAlarmLogAlarmId
The alarm type.
Enumeration
Enumerated Values:
1npuEthConn
2npuMngConn
3npuAuConn
4auRlinkLoss
5npuLciUnauthAcc
6npuTelnetUnauthAcc
7bitFailed
8npuLciAccess
9npuTelnetAccess
10npuReset
11swDnl
12swDnlFail
13swDnlSwitch
14bstCard
15bstPerFault
16bstEnvFault
17service
18bstExt1PPSFault
19bstInt1PPSFault
20bstExt16MHzFault
21bstInt16MHzFault
22bstGpsComFault
23bstGpsHealthFault
24bstGpsNumSatsFault
25authSrvKeepAliveFault
26acctSrvKeepAliveFault
27auModeConflict
28auOduComError
29auOduBandMismatch
30auExt1PPSFault
31auHoldOverEntered
32auHoldOverTOPassed
 .1.3.6.1.4.1.12394.1.2.6.22.1.1
trapAlarmLogSource
The alarm source.
Enumeration
Enumerated Values:
1npu
2au
3su
4bs
5psu
6piu
7acu
8service
 .1.3.6.1.4.1.12394.1.2.6.22.1.2
trapAlarmLogSlotId
The alarm card slot id.
Slot 5-6 are allowed for NPU card, although in the current version NPU can be used only in slot 5.
Slots 1-4, 7-9 are allowed for AU card.
Slots 1-4 are allowed for PSU card.
Slots 1-2 are allowe…
Integer32
Constraints:
range: 1-9
 .1.3.6.1.4.1.12394.1.2.6.22.1.3
trapAlarmLogEventId
The trap ID defined in the TRAP-TYPE macro.
For standard SNMP traps, the proprietary trap IDs are:
ColdStart - 128
WarmStart - 129
LinkDown - 130
LinkUp - 131
AuthenticationFailure - 132.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.6.22.1.4
trapAlarmLogName
The representing trap name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.6.22.1.5
trapAlarmLogSeverity
The trap severity.
TrapSeverity
Type Values:
0none
1critical
2major
3minor
4warning
5info
 .1.3.6.1.4.1.12394.1.2.6.22.1.6
trapAlarmLogCategory
The trap category according to the X.733.
Enumeration
Enumerated Values:
0none
1communications
2qualityOfService
3processingError
4equipment
5environmental
 .1.3.6.1.4.1.12394.1.2.6.22.1.7
trapAlarmLogStrOn
The representing trap string.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.6.22.1.8
trapAlarmLogVarBindNumber
The trap Variable Bind Number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.6.22.1.9
trapAlarmLogVarBindSize
The trap Variable Bind Size.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.6.22.1.10
trapAlarmLogAddVarAttributes
The trap Variable Attributes Additional information.
NA is used for inactive Alarms.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.6.22.1.11
trapAlarmLogLed
The NPU LEDs associated with alarm. Not applicable for current version.
Enumeration
Enumerated Values:
0none
1led
2ledBst
 .1.3.6.1.4.1.12394.1.2.6.22.1.12

rbEthIfConfigTable

table
.1.3.6.1.4.1.12394.1.2.7.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbEthIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbEthIfConfigTable' 
This table contains Ethernet interface configuration parameters.
To receive the Ethernet Interface configuration to a specific SU, community 
<com>@SU.<MacAddress> should be used.
rbEthIfConfigEntry row .1.3.6.1.4.1.12394.1.2.7.1.1.1
Table entry
Indexes
Column Syntax OID
ethConfigIfIndex
Index of Ethernet Interface. In NPU and Micro Base Station,
1 is for the DATA port and 2 is for the MGMT port.
In SU, 1 is for the ETHERNET port and 2 is not applicable.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.12394.1.2.7.1.1.1.1
ethConfigAutoNegotiation
The Auto Negotiation mode that will be active after the reset.
Not applicable for NPU ports.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.12394.1.2.7.1.1.1.2
ethConfigLinkSpeedAndDuplex
The configured Speed and Duplex that will be in effect after the next reset.
Applicable only if Auto Negotiation is Disabled. The applicable options are:
In NPU Data port - 100 Mbps Full Duplex, 1 Gbps Full Duplex.
In N…
LinkSpeedAndDuplexr/w
Type Values:
1unknown
2fullDuplex100Mbps
3halfDuplex100Mbps
4fullDuplex10Mbps
5halfDuplex10Mbps
6fullDuplex1Gbps
7halfDuplex1Gbps
 .1.3.6.1.4.1.12394.1.2.7.1.1.1.3
ethConfigCurrentdAutoNegotiation
The current Auto Negotiation mode (enabled/disabled).
In NPU, DATA port is always disabled, MGMT port is always enabled.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.12394.1.2.7.1.1.1.4
ethConfigCurrentLinkSpeedAndDuplex
When Auto Negotiation is disabled, this is the current Speed and Duplex.
When Auto Negotiation is enabled, this is the detected Speed and Duplex.
LinkSpeedAndDuplex
Type Values:
1unknown
2fullDuplex100Mbps
3halfDuplex100Mbps
4fullDuplex10Mbps
5halfDuplex10Mbps
6fullDuplex1Gbps
7halfDuplex1Gbps
 .1.3.6.1.4.1.12394.1.2.7.1.1.1.5

rbAuOutdoorConfigTable

table deprecated
.1.3.6.1.4.1.12394.1.2.7.2.8 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbAuOutdoorConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbAuOutdoorConfigTable' 
This table is deprecated from version 2.0.
This table contains AU PHY Configuration Parameters per Outdoor unit.
rbAuOutdoorConfigEntry row .1.3.6.1.4.1.12394.1.2.7.2.8.1
Table entry
Indexes
Column Syntax OID
auOutdoorUnitIndexdeprecated
Index of outdoor unit.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.12394.1.2.7.2.8.1.1
auFrequencyBanddeprecated
This parameter defines frequency band.
Enumeration
Enumerated Values:
1bandA1
2bandB
3bandF
4bandD
5bandE
12band23
13band25A
14band25B
 .1.3.6.1.4.1.12394.1.2.7.2.8.1.2
auTxPowerdeprecated
Working Transmit Power in dBm. The Min is 13 dBm, the Max is 28 dBm.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.7.2.8.1.3

rbSuBestBstAuParamsTable

table
.1.3.6.1.4.1.12394.1.2.7.2.10.1 · 1 row entry · 13 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSuBestBstAuParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSuBestBstAuParamsTable' 
This table provides parameters information regarding the Best BST/AU Configuration and Status.
rbSuBestBstAuParamsEntry row .1.3.6.1.4.1.12394.1.2.7.2.10.1.1
Table entry
Indexes
Column Syntax OID
rbSuCurrentBestBstAuSupport
Enable/Disable the feature - current value.
Enumeration
Enumerated Values:
0notDefined
1enable
2disable
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.1
rbSuConfiguredBestBstAuSupport
Enable/Disable the feature - configured value.
Enumerationr/w
Enumerated Values:
0notDefined
1enable
2disable
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.2
rbSuCurrentPreferredBstAuId
Define the base ID for the preferred BST/AU - current value.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.3
rbSuConfiguredPreferredBstAuId
Define the base ID for the preferred BST/AU - configured value.
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.4
rbSuCurrentPreferredBstAuMask
The ID mask that together with the Preferred BST/AU ID defines
a range of preferred BST/AUs - current value.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.5
rbSuConfiguredPreferredBstAuMask
The ID mask that together with the Preferred BST/AU ID defines
a range of preferred BST/AUs - configured value.
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.6
rbSuSelectedBstAu
The selected BST/AU ID.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.7
rbSuSelectedRxFrequency
The selected Rx Frequency, in MHz.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.8
rbSuSelectedTxFrequency
The selected Tx Frequency, in MHz.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.9
rbSuCurrentBstAuId
Define the base ID for the BST/AU - current value.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.10
rbSuConfiguredBstAuId
Define the base ID for the BST/AU - configured value.
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.11
rbSuCurrentBstAuMask
The ID mask that together with the BST/AU ID defines
a range of BST/AUs - current value.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.12
rbSuConfiguredBstAuMask
The ID mask that together with the BST/AU ID defines
a range of BST/AUs - configured value.
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.1.1.13

rbSuBestBstAuDataTable

table
.1.3.6.1.4.1.12394.1.2.7.2.10.2 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSuBestBstAuDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSuBestBstAuDataTable' 
This table provides parameters information regarding the Best BST/AU Scanning Results.
Includes parameters for all relevant AUs that were found in the scanning process.
rbSuBestBstAuDataEntry row .1.3.6.1.4.1.12394.1.2.7.2.10.2.1
Table entry
Indexes
Column Syntax OID
rbBstAuIndx
The table index
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.2.1.1
rbBstAuId
The BST/AU ID.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.12394.1.2.7.2.10.2.1.2
rbBstAuRxFrequency
The BST/AU's downlink frequency.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.7.2.10.2.1.3
rbBstAuSNR
The SNR of the signal that was received at the SU side.
TenthdB .1.3.6.1.4.1.12394.1.2.7.2.10.2.1.4
rbBstAuRxAntennaNumber
The Rx Antenna Number.
Enumeration
Enumerated Values:
0unknown
1internal1
2internal2
3internal3
4internal4
5internal5
6internal6
7external
8automatic
 .1.3.6.1.4.1.12394.1.2.7.2.10.2.1.5

rbSuRadioParametersTable

table
.1.3.6.1.4.1.12394.1.2.7.2.11.1 · 1 row entry · 20 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSuRadioParametersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSuRadioParametersTable' 
This table provides parameters information regarding the Best BST/AU Frequency Scanning Parameters.
rbSuRadioParametersEntry row .1.3.6.1.4.1.12394.1.2.7.2.11.1.1
Table entry
Indexes
Column Syntax OID
rbSuCurrentScanStartFreq
First frequency to be used by the scanning process - current value.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.1
rbSuConfiguredScanStartFreq
First frequency to be used by the scanning process - configured value.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.2
rbSuCurrentScanEndFreq
End frequency to be used by the scanning process - current value.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.3
rbSuConfiguredScanEndFreq
End frequency to be used by the scanning process - configured value.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.4
rbSuCurrentScanStep
The scanning step in MHz- current value.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.5
rbSuConfiguredScanStep
The scanning step in MHz- configured value.
Resolution: 125 KHz step up to 1.75MHz for bandwith multiple of 1.75 and
up to 5MHz for bandwith multiple of 2.5.
Default for bandwith multiple of 1.75: 875 KHz.
Default for b…
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.6
rbSuCurrentScanMask
This is a bit-mask field: 00-FF.
Allow scanning none standard frequencies that cannot be found by original Scan Steps - current value.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.7
rbSuConfiguredScanMask
This is a bit-mask field: 00-FF.
Allow scanning none standard frequencies that cannot be found by original Scan Steps - configured value.
Bit 0: Steps of 0 MHz (Start Frequency only).
Bit 1: Steps of 0.125 MHz.
Bit 2: S…
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.8
rbSuDiscreteF1
Su Discrete 1st Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.9
rbSuDiscreteF2
Su Discrete 2nd Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.10
rbSuDiscreteF3
Su Discrete 3rd Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.11
rbSuDiscreteF4
Su Discrete 4th Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.12
rbSuDiscreteF5
Su Discrete 5th Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.13
rbSuDiscreteF6
Su Discrete 6th Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.14
rbSuDiscreteF7
Su Discrete 7th Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.15
rbSuDiscreteF8
Su Discrete 8th Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.16
rbSuDiscreteF9
Su Discrete 9th Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.17
rbSuDiscreteF10
Su Discrete 10th Frequency. 0(Null) means frequency is not configured.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.18
rbSuCurrentBandwidth
b175 (1): 1.75 MHz
b35 (2): 3.5 MHz
b50 (3): 5 MHz
b70 (4): 7 MHz
b100 (5): 10 MHz
The actually available bandwidths depend on the SU's hardware and SW version.
A bandwidth that is not supported by the hardw…
Enumeration
Enumerated Values:
1b175
2b35
3b50
4b70
5b100
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.19
rbSuConfiguredBandwidth
This parameter defines the configured bandwidth,
that will be in effect after the next reset.
Enumerationr/w
Enumerated Values:
1b175
2b35
3b50
4b70
5b100
 .1.3.6.1.4.1.12394.1.2.7.2.11.1.1.20

rbIpIfConfigTable

table
.1.3.6.1.4.1.12394.1.2.9.1 · 1 row entry · 7 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbIpIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbIpIfConfigTable' 
This table contains IP configuration parameters per interface.
rbIpIfConfigEntry row .1.3.6.1.4.1.12394.1.2.9.1.1
Table entry
Indexes
Column Syntax OID
ipIfConfigIfIndex
Index of Ethernet Interface.
In NPU and Micro Base Station, 1 is for the DATA port and 2 is for the MGMT port.
In SU, 1 is for the ETHERNET port and 2 is not applicable.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.12394.1.2.9.1.1.1
ipIfConfigVlanId
The management VLAN ID associated with the specific interface.
Applicable only for the DATA port of NPU/Micro Base Station.
The range is from 0 to 4095, where 4095 means that no management VLAN ID is defined.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.12394.1.2.9.1.1.2
ipIfConfigIpAddress
IP Address of the interface.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.2.9.1.1.3
ipIfConfigNetworkMask
The Subnet Mask of the interface.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.2.9.1.1.4
ipIfConfigDefaultGateway
Default Gateway IP Address of the interface.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.2.9.1.1.5
ipIfStaticRouteSubnet
Applicable only to the MGMT port of NPU/Micro Base Station.
The Destination Subnet (base IP address of the subnet)
of the stations that can manage the device when connected via a router to the MGMT port.
All manageme…
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.2.9.1.1.6
ipIfStaticRouteSubnetMask
Applicable only to the MGMT port of NPU/Micro Base Station.
The Destination Subnet Mask associated with the Destination Subnet (ipIfStaticRouteSubnet).
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.2.9.1.1.7

rbSwUpgradeLogTable

table
.1.3.6.1.4.1.12394.1.2.10.6 · 1 row entry · 7 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSwUpgradeLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSwUpgradeLogTable' 
This table contains the status of the last software upgrade performed for 
specific AUs or SUs.
rbSwUpgradeLogEntry row .1.3.6.1.4.1.12394.1.2.10.6.1
Table entry
Indexes
Column Syntax OID
rbSwDeviceType
Type of device participating in the software upgrade process.
Enumeration
Enumerated Values:
1au
2su
 .1.3.6.1.4.1.12394.1.2.10.6.1.1
rbSwDeviceId
Identification of device. For AU - slot number , for SU - MAC Address.
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.12394.1.2.10.6.1.2
rbSwUpgradeFileName
The name of the software file that was used for upgrade.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.10.6.1.3
rbSwUpgradeAction
The last performed software upgrade action.
Enumeration
Enumerated Values:
1none
3putToShadow
4resetAndRunFromShadow
5makeRunningVersionOperational
6startRegistration
 .1.3.6.1.4.1.12394.1.2.10.6.1.4
rbSwUpgradeStartTime
The time when the software upgrade process was started.
Not supported in current version.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.10.6.1.5
rbSwUpgradeEndTime
The time when the software upgrade process was finished.
Not supported in current version.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.10.6.1.6
rbSwUpgradeStatus
The status of the software upgrade process.
Enumeration
Enumerated Values:
1none
2success
3inProgress
4failed
5pending
 .1.3.6.1.4.1.12394.1.2.10.6.1.7

rbRadioClusterTable

table
.1.3.6.1.4.1.12394.1.2.12.1 · 1 row entry · 6 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbRadioClusterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbRadioClusterTable' 
Table that holds Radio Clusters` parameters.
rbRadioClusterEntry row .1.3.6.1.4.1.12394.1.2.12.1.1
Row Description
Indexes
Column Syntax OID
rbRadioClusterId
Radio Cluster ID.
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.12394.1.2.12.1.1.1
rbRadioClusterName
Radio Cluster name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.12394.1.2.12.1.1.2
rbRadioClusterLocation
Radio Cluster Location.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.12394.1.2.12.1.1.3
rbRadioClusterSectorHeading
Radio Cluster Sector Heading - the angle from the north.
Integer32r/w
Constraints:
range: 0-359
 .1.3.6.1.4.1.12394.1.2.12.1.1.4
rbRadioClusterSectorBeamWidth
Radio Cluster Sector Antenna`s Beam Width.
Integer32r/w
Constraints:
range: 0-359
 .1.3.6.1.4.1.12394.1.2.12.1.1.5
rbRadioClusterRowStatus
Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device
and relevant parameters may be modified;
createAndGo (4) is u…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12394.1.2.12.1.1.6

rbOduConfigTable

table
.1.3.6.1.4.1.12394.1.2.13.1 · 1 row entry · 14 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbOduConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbOduConfigTable' 
Table that holds ODU`s parameters.
rbOduConfigEntry row .1.3.6.1.4.1.12394.1.2.13.1.1
Row Description
Indexes
Column Syntax OID
rbOduConfigId
ODU's ID.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.12394.1.2.13.1.1.1
rbOduAssociatedRadioClusterId
Associated Radio Cluster ID. Valid values: 1 to 6.
Must be the ID of a defined Radio Cluster.
Agent will return 0 if Associated Radio Cluster ID is unknown.
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.12394.1.2.13.1.1.2
rbOduTxPower
The ODU's Tx Power in dBm. Allowed range is from 13 to 50,
using a resolution of 0.25dBm.
Actual range is from 13 to the value defined by rbOduMaxTxPower.
For AUs using diversity (rbAuDiversityMode other than noDivers…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.13.1.1.3
rbOduAdminStatus
Odu Admin Status.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.12394.1.2.13.1.1.4
rbOduTemperature
Odu Messured Temperature.
Agent will return 0 if Odu Temperature is unknown.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.13.1.1.5
rbOduHwRevision
Odu HW Revision.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.13.1.1.6
rbOduHwConfigDescription
Odu HW Configuration Description.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.13.1.1.7
rbOduOperationalStatus
Odu Operational Status.
Enumeration
Enumerated Values:
1initFailure
2down
3powerOff
4powerOnWait
5powerOn
6initializing
7up
 .1.3.6.1.4.1.12394.1.2.13.1.1.8
rbOduHwHC08Version
The version of the HC08 component in the ODU.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.13.1.1.9
rbOduCpldVersion
The version of the CPLD component in the ODU.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.12394.1.2.13.1.1.10
rbOduCardSerialNumber
The serial number of the ODU.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.13.1.1.11
rbOduConfigFrequencyBand
Odu Configured Frequency Band ID.
Must be one of the Frequency Band IDs available in the Frequency Bands Table.
Agent will return 0 if Frequency Band is unknown.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.13.1.1.12
rbOduRowStatus
Control for creating and deleting entries. Entries may be modified while active.
active (1) - means that the entry is available for use by the managed device
and relevant parameters may be modified;
createAndGo (4) is u…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.12394.1.2.13.1.1.13
rbOduMaxTxPower
The maximum Tx power supported by the ODU, in dBm units.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.2.13.1.1.14

rbLicenseBankTable

table
.1.3.6.1.4.1.12394.1.2.50.1 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbLicenseBankTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbLicenseBankTable' 
A Table of CPE Licenses.
rbLicenseBankEntry row .1.3.6.1.4.1.12394.1.2.50.1.1
Table entry.
Indexes
Column Syntax OID
rbLicenseId
Type of Licenses: bandwidth (1) - Bandwidth License.
Enumeration
Enumerated Values:
1bandwidth
 .1.3.6.1.4.1.12394.1.2.50.1.1.1
rbLicenseValue
For Bandwidth Limitation License the current valid value is 0 for Unlimited Bandwidth.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.50.1.1.2
rbLicenseCount
The number of applicable Licenses that are available in the CPEs License Bank.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.50.1.1.3
rbLicenseDescription
The Licenses Description.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.12394.1.2.50.1.1.4

rbLicenseBstTable

table
.1.3.6.1.4.1.12394.1.2.50.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbLicenseBstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbLicenseBstTable' 
A Table of Base Station/Micro Base Station Licenses.
rbLicenseBstEntry row .1.3.6.1.4.1.12394.1.2.50.2.1.1
Table entry.
Indexes
Column Syntax OID
rbBstLicenseId
Type of Licenses:
bandwidth (1) - Bandwidth limitation for all PRO-L SUs served by the Base Station/Micro Base Station,
maxNumberOfSUs (2) - Maximum Number of SU's is relevant only for Micro Base Station.
Enumeration
Enumerated Values:
1bandwidth
2maxNumberOfSUs
 .1.3.6.1.4.1.12394.1.2.50.2.1.1.1
rbBstLicenseValue
For Bandwidth Limitation License the current valid value is 0 for Unlimited Bandwidth.
For Maximum Number of SUs License the valid values are 50, 150, 250.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.50.2.1.1.2
rbBstLicenseDescription
The Licenses Description.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.12394.1.2.50.2.1.1.3

rbSUTempGracePeriodLicenseTable

table
.1.3.6.1.4.1.12394.1.2.50.3 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSUTempGracePeriodLicenseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSUTempGracePeriodLicenseTable' 
SU Temporary Grace Period License Table.
rbSUTempGracePeriodLicenseEntry row .1.3.6.1.4.1.12394.1.2.50.3.1
Table entry.
Indexes
Column Syntax OID
rbSUTempGracePeriodIndex
The INDEX of the SU Temporary Grace Period License Table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.50.3.1.1
rbSUTempGracePeriodSuMacAddr
The MAC address of the SU.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.12394.1.2.50.3.1.2
rbSUTempGracePeriodLicenseId
Type of Licenses: bandwidth (1) - Bandwidth License.
Enumeration
Enumerated Values:
1bandwidth
 .1.3.6.1.4.1.12394.1.2.50.3.1.3
rbSUTempGracePeriodLicenseEndDate
SU Temporary Grace Period Date.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.50.3.1.4

rbSUGracePeriodLicenseTable

table
.1.3.6.1.4.1.12394.1.2.50.4 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk rbSUGracePeriodLicenseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAINBOW-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAINBOW-MIB::rbSUGracePeriodLicenseTable' 
SU Grace Period Table.
rbSUGracePeriodLicenseEntry row .1.3.6.1.4.1.12394.1.2.50.4.1
Table entry.
Indexes
Column Syntax OID
rbSUGracePeriodIndex
The INDEX of the SU Grace Period License Table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.2.50.4.1.1
rbSUGracePeriodSuMacAddr
The MAC address of the SU.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.12394.1.2.50.4.1.2
rbSUGracePeriodLicenseId
Type of Licenses: bandwidth (1) - Bandwidth License.
Enumeration
Enumerated Values:
1bandwidth
 .1.3.6.1.4.1.12394.1.2.50.4.1.3
rbSUGracePeriodLicenseEndDate
SU Grace Period End Date.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12394.1.2.50.4.1.4
rbSUGracePeriodLicenseStatus
License SU Grace Period Admin Status.
Enumeration
Enumerated Values:
1licenseNone
2licenseActivated
3licenseActiveWarnIssued
4licenseUsed
 .1.3.6.1.4.1.12394.1.2.50.4.1.5