rldot1dStpType

RADLAN-BRIDGEMIBOBJECTS-MIB · .1.3.6.1.4.1.89.57.2.2
MIB view Table view

Object

scalar Enumeration 
Specifies whether the device supports Spanning Tree per device,
or per group.

Context

MIB
RADLAN-BRIDGEMIBOBJECTS-MIB
OID
.1.3.6.1.4.1.89.57.2.2
Type
scalar
Access
readonly
Status
current
Parent
rldot1dStp
Siblings
25

Syntax

Enumeration

Values & Constraints

Enumerated Values
1perDevice
4mstp

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rldot1dStpMibVersion
MIB's version, the current version is 2.
scalarInteger32.1.3.6.1.4.1.89.57.2.1
rldot1dStpMonitorTime
Factor of hello-time during which a port is monotored to determine if it is stable.
scalarInteger32.1.3.6.1.4.1.89.57.2.10
rldot1dStpBpduCount
The number of bpdu that need to received for the link to be considered stable.
scalarInteger32.1.3.6.1.4.1.89.57.2.11
rldot1dStpLastChanged
The last time any object in this table was changed by SNMP or other local management means.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.89.57.2.12
rldot1dStpPortTable
A table that contains extended pair port specific information.
table-.1.3.6.1.4.1.89.57.2.13
rldot1dStpPortsEnable
Enable / Disable spanning tree on ports by default .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.14
rldot1dStpTaggedFlooding
flooding can be done in tagged bpdu .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.15
rldot1dStpPortBelongToVlanDefault
The default value of rldot1dStpPortMustBelongToVlan .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.16
rldot1dStpEnableByDefault
The default value of rldot1dStpEnable .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.17
rldot1dStpPortToDefault
To order port/s to revert to default setings .
scalarInteger32.1.3.6.1.4.1.89.57.2.18
rldot1dStpSupportedType
The type of stp supported by the device.
scalarEnumeration.1.3.6.1.4.1.89.57.2.19
rldot1dStpEdgeportSupportInStp
If EdgePort is supported in stpCompatible mode .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.20
rldot1dStpFilterBpdu
Specified if the device should filter BPDUs when STP is disabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.21
rldot1dStpFloodBpduMethod
Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging.
scalarEnumeration.1.3.6.1.4.1.89.57.2.22
rldot1dStpSeparatedBridgesnode-.1.3.6.1.4.1.89.57.2.23
rldot1dStpPortBpduGuardTable
A table that contains for each port whether it is bpdu guard .
table-.1.3.6.1.4.1.89.57.2.24
rldot1dStpLoopbackGuardEnable
Define if STP loopback guard feature is globally enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.25
rldot1dStpDisabledPortStateTable
Define stp port state for each stp disabled interface. This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port. The MIB contains only stp disabled …
table-.1.3.6.1.4.1.89.57.2.26
rldot1dStpEnable
Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.3
rldot1dStpPortMustBelongToVlan
Specifies whether a port must belong to a VLAN in order to participate in the STP.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.4
rldot1dStpExtendedPortNumberFormat
Specifies whether the STP uses the extended port fnumber format.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.89.57.2.5
rldot1dStpVlanTable
A table that contains vlan-specific information for the Spanning Tree Protocol.
table-.1.3.6.1.4.1.89.57.2.6
rldot1dStpVlanPortTable
A table that contains pair <vlan, port> specific information for the Spanning Tree Protocol.
table-.1.3.6.1.4.1.89.57.2.7
rldot1dStpTrapVariablenode-.1.3.6.1.4.1.89.57.2.8
rldot1dStpTypeAfterReset
New mode of spaning tree supported by the device after the next reset.
scalarEnumeration.1.3.6.1.4.1.89.57.2.9