RADLAN-BRIDGEMIBOBJECTS-MIB Table View

A list of PortGroupNumber for each port.

rldot1dPriorityPortGroupEntry row .1.3.6.1.4.1.89.57.1.2.1

All ports belonging to a same group have
the same User Priority to Traffic Class mapping.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
rldot1dPriorityPortGroupNumber A group, that port belongs to. All ports belonging to a same group have the same User Priority to Traffic Class mapping.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.1.2.1.1

A table that contains vlan-specific information
for the Spanning Tree Protocol.

rldot1dStpVlanEntry row .1.3.6.1.4.1.89.57.2.6.1

A list of information maintained by every Vlan
about the Spanning Tree Protocol state for that
Vlan.

Indexes

rldot1dStpVlan

Column	Syntax	OID
rldot1dStpVlan The Vlan index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.2.6.1.1
rldot1dStpVlanEnable Specifies whether this vlan is STP enable or disable	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.2.6.1.2
rldot1dStpTimeSinceTopologyChange The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.57.2.6.1.3
rldot1dStpTopChanges The total number of topology changes detected by this bridge since the management entity was last reset or initialized.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.57.2.6.1.4
rldot1dStpDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originat…	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.89.57.2.6.1.5
rldot1dStpRootCost The cost of the path to the root as seen from this bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.2.6.1.6
rldot1dStpRootPort The port number of the port which offers the lowest cost path from this bridge to the root bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.2.6.1.7
rldot1dStpMaxAge The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.89.57.2.6.1.8
rldot1dStpHelloTime The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual v…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.89.57.2.6.1.9
rldot1dStpHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.2.6.1.10
rldot1dStpForwardDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Li…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.89.57.2.6.1.11

A table that contains pair <vlan, port> specific information
for the Spanning Tree Protocol.

rldot1dStpVlanPortEntry row .1.3.6.1.4.1.89.57.2.7.1

A list of information maintained by every pair <vlan, port>
about the Spanning Tree Protocol state for that pair.

Indexes

rldot1dStpVlanPortVlan rldot1dStpVlanPortPort

Column	Syntax	OID
rldot1dStpVlanPortVlan The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.89.57.2.7.1.1
rldot1dStpVlanPortPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.89.57.2.7.1.2
rldot1dStpVlanPortPriority The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rldot1dStpVlanPort.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.89.57.2.7.1.3
rldot1dStpVlanPortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will pl…	Enumeration Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.89.57.2.7.1.4
rldot1dStpVlanPortEnable The enabled/disabled status of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.89.57.2.7.1.5
rldot1dStpVlanPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.89.57.2.7.1.6
rldot1dStpVlanPortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.89.57.2.7.1.7
rldot1dStpVlanPortDesignatedCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.2.7.1.8
rldot1dStpVlanPortDesignatedBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.89.57.2.7.1.9
rldot1dStpVlanPortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.89.57.2.7.1.10
rldot1dStpVlanPortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.57.2.7.1.11

A table that contains extended pair port specific information.

rldot1dStpPortEntry row .1.3.6.1.4.1.89.57.2.13.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that port.

Indexes

rldot1dStpPortPort

Column	Syntax	OID
rldot1dStpPortPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.89.57.2.13.1.1
rldot1dStpPortDampEnable Specified if dampening is enabled on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.2.13.1.2
rldot1dStpPortDampStable Specified if the port is stable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.2.13.1.3
rldot1dStpPortFilterBpdu Specified if this port should filter bpdus when stp is disabled.	Enumerationr/w Enumerated Values: 0 false 1 true 2 none	.1.3.6.1.4.1.89.57.2.13.1.4
rldot1dStpPortBpduSent Specified the number of bpdu sent from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.57.2.13.1.5
rldot1dStpPortBpduReceived Specified the number of bpdu received in this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.57.2.13.1.6
rldot1dStpPortRole Specified the role of this this port.	Enumeration Enumerated Values: 0 unknown 1 disabled 2 alternate 3 backup 4 root 5 designated	.1.3.6.1.4.1.89.57.2.13.1.7
rldot1dStpBpduType Specified the type of BPDU transmitted by this port.	Enumeration Enumerated Values: 0 stp 1 rstp	.1.3.6.1.4.1.89.57.2.13.1.8
rldot1dStpPortRestrictedRole If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been sel…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.2.13.1.9
rldot1dStpPortAutoEdgePort If TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.2.13.1.10
rldot1dStpPortLoopback Specified loopback was detected on port. Usable for only a short period of time if stp loopback guard is enabled (since port enters into shutdown state).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.2.13.1.11
rldot1dStpPortBpduOperStatus Specified BPDU handling operative status for port.	Enumeration Enumerated Values: 0 filter 1 flood 2 bridge 3 stp	.1.3.6.1.4.1.89.57.2.13.1.12

Define if separated bridges feature is enabled  for each interface.

rldot1dStpSeparatedBridgesEntry row .1.3.6.1.4.1.89.57.2.23.1.1

Defines the contents of each line in the rlSeparatedBridgesTable table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rldot1dStpSeparatedBridgesPortEnable This variable indicates whether the separated bridge feature is enabled on a specified ifIndex.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.2.23.1.1.1

A table that contains for each port whether it is bpdu guard .

rldot1dStpPortBpduGuardEntry row .1.3.6.1.4.1.89.57.2.24.1

A list of information maintained by every port
whether it is bpdu guard.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
rldot1dStpPortBpduGuardEnable Specified if bpdu guard is enabled on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.2.24.1.1

Define stp port state for each stp disabled interface.
This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port.
The MIB contains only stp disabled ports entries

rldot1dStpDisabledPortStateEntry row .1.3.6.1.4.1.89.57.2.26.1

Defines the contents of each line in the rldot1dStpDisabledPortStateTable table.

Indexes

BRIDGE-MIBdot1dStpPort

Column	Syntax	OID
rldot1dStpDisabledPortState The port's stp state as defined by external application . This state controls what action a port takes on reception of a frame.	Enumerationr/w Enumerated Values: 2 blocking 3 listening 4 learning 5 forwarding	.1.3.6.1.4.1.89.57.2.26.1.1

A table that contains pair <vlan, port> specific information
for the Rapid Spanning Tree Protocol.

rldot1wRStpVlanEdgePortEntry row .1.3.6.1.4.1.89.57.4.1.1

A list of information maintained by every pair <vlan, port>
about the RAPID Spanning Tree Protocol state for that pair.

Indexes

rldot1wRStpVlanEdgePortVlan rldot1wRStpVlanEdgePortPort

Column	Syntax	OID
rldot1wRStpVlanEdgePortVlan The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..40…	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.89.57.4.1.1.1
rldot1wRStpVlanEdgePortPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.4.1.1.2
rldot1wRStpEdgePortStatus Specifies whether this port is an Edge Port or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.4.1.1.3

A table that contains  <vlan> specific information
for the Rapid Spanning Tree Protocol.

rldot1wRStpForceVersionEntry row .1.3.6.1.4.1.89.57.4.2.1

A list of information maintained by every <vlan>
about the RAPID Spanning Tree Protocol state for that pair.

Indexes

rldot1wRStpForceVersionVlan

Column	Syntax	OID
rldot1wRStpForceVersionVlan The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..40…	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.89.57.4.2.1.1
rldot1wRStpForceVersionState Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.4.2.1.2

This table hold information the priority maps

rldot1pPriorityMapEntry row .1.3.6.1.4.1.89.57.5.2.1

The row definition for this table.

Indexes

rldot1pPriorityMapName

Column	Syntax	OID
rldot1pPriorityMapName The map name	OctetString Constraints: range: 1-25	.1.3.6.1.4.1.89.57.5.2.1.1
rldot1pPriorityMapPriority The map holding the queue	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.89.57.5.2.1.2
rldot1pPriorityMapPort the port that the map, is applied on in config	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.57.5.2.1.3
rldot1pPriorityMapPortList the ports that the map, is applied on in actual	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.89.57.5.2.1.4
rldot1pPriorityMapStatus The status of the table entry. It's used to delete an entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.57.5.2.1.5

A table that contains Mstp instance specific information
for the Multiple Spanning Tree Protocol.

rldot1sMstpInstanceEntry row .1.3.6.1.4.1.89.57.6.1.1

A list of information maintained by every instance
about the multiple Spanning Tree Protocol state for
that instance.

Indexes

rldot1sMstpInstanceId

Column	Syntax	OID
rldot1sMstpInstanceId The Instance index.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.89.57.6.1.1.1
rldot1sMstpInstanceEnable Specifies whether this Instance is STP enable or disable	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.6.1.1.2
rldot1sMstpInstanceTimeSinceTopologyChange The time (in hundredths of a second) since the last time a topology change was detected by the Mstp Instance .	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.57.6.1.1.3
rldot1sMstpInstanceTopChanges The total number of topology changes detected by this Instance since the management entity was last reset or initialized.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.57.6.1.1.4
rldot1sMstpInstanceDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Muliple Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs …	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.89.57.6.1.1.5
rldot1sMstpInstanceRootCost The cost of the path to the root as seen from this bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.6.1.1.6
rldot1sMstpInstanceRootPort The port number of the port which offers the lowest cost path from this bridge to the root bridge.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.6.1.1.7
rldot1sMstpInstanceMaxAge The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.89.57.6.1.1.8
rldot1sMstpInstanceHelloTime The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual v…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.89.57.6.1.1.9
rldot1sMstpInstanceHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.6.1.1.10
rldot1sMstpInstanceForwardDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Li…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.89.57.6.1.1.11
rldot1sMstpInstancePriority The value of the write-able portion of the Bridge ID, i.e., the first four bits of the first octet of the (8 octet long) Bridge ID.The value is a product of 4096. The next 12 bit are the msti id . The other (last) 6 oct…	Integer32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.89.57.6.1.1.12
rldot1sMstpInstanceRemainingHopes This count value determines the amount of hopes the information transmited by this bridge on this instance can travel.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.6.1.1.13

A table that contains pair <msti, port> specific information
for the Spanning Tree Protocol.

rldot1sMstpInstancePortEntry row .1.3.6.1.4.1.89.57.6.2.1

A list of information maintained by every pair <msti, port>
about the Spanning Tree Protocol state for that pair.

Indexes

rldot1sMstpInstancePortMstiId rldot1sMstpInstancePortPort

Column	Syntax	OID
rldot1sMstpInstancePortMstiId The Vlan group number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.89.57.6.2.1.1
rldot1sMstpInstancePortPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.89.57.6.2.1.2
rldot1sMstpInstancePortPriority The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The value is a product of 16. The other octet of the Port ID is given by th…	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.89.57.6.2.1.3
rldot1sMstpInstancePortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will pl…	Enumeration Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.89.57.6.2.1.4
rldot1sMstpInstancePortEnable The enabled/disabled status of the port.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.89.57.6.2.1.5
rldot1sMstpInstancePortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32 Constraints: range: 1-200000000	.1.3.6.1.4.1.89.57.6.2.1.6
rldot1sMstpInstancePortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.89.57.6.2.1.7
rldot1sMstpInstancePortDesignatedCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.6.2.1.8
rldot1sMstpInstancePortDesignatedBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.89.57.6.2.1.9
rldot1sMstpInstancePortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.89.57.6.2.1.10
rldot1sMstpInstancePortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.57.6.2.1.11
rldot1sMStpInstancePortAdminPathCost The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cos…	Integer32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.89.57.6.2.1.12
rldot1sMStpInstancePortRole Specify the role of this this port.	Enumeration Enumerated Values: 0 unknown 1 disabled 2 alternate 3 backup 4 root 5 designated 6 master	.1.3.6.1.4.1.89.57.6.2.1.13

A table that contains information about the alocation of vlans to groups.

rldot1sMstpVlanEntry row .1.3.6.1.4.1.89.57.6.6.1

A list of information maintained by every vlan
about the group it belongs to.

Indexes

rldot1sMstpVlan

Column	Syntax	OID
rldot1sMstpVlan The vlan number of the vlan for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.89.57.6.6.1.1
rldot1sMstpGroup Specifid the active group number this vlan belonges to.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.89.57.6.6.1.2
rldot1sMstpPendingGroup Specifid the pending group number this vlan belonges to.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.89.57.6.6.1.3

A table that contains MSTP information about ports of the CIST.

rldot1sMstpExtPortEntry row .1.3.6.1.4.1.89.57.6.7.1

A list of information maintained by every port
of the CIST.

Indexes

rldot1sMstpExtPortPort

Column	Syntax	OID
rldot1sMstpExtPortPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.89.57.6.7.1.1
rldot1sMstpExtPortInternalOperPathCost The contribution of this port to the path cost of paths towards the spanning tree regional root which include this port. 802.1S-2002 recommends that the default value of this parameter be in inverse proportion to the s…	Integer32 Constraints: range: 1-200000000	.1.3.6.1.4.1.89.57.6.7.1.2
rldot1sMstpExtPortDesignatedRegionalRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.89.57.6.7.1.3
rldot1sMstpExtPortDesignatedRegionalCost The regional path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.57.6.7.1.4
rldot1sMstpExtPortBoundary Indication if the port is conented to to a lan segment outside or inside the region.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.57.6.7.1.5
rldot1sMstpExtPortInternalAdminPathCost The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cos…	Integer32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.89.57.6.7.1.6

This table contains vlan lists per MSTP instances.

rldot1sMstpInstanceVlanEntry row .1.3.6.1.4.1.89.57.6.15.1

The entry contains vlan lists per specific MSTP instance.

Indexes

rldot1sMstpInstanceVlanId

Column	Syntax	OID
rldot1sMstpInstanceVlanId Specifiy the instance number.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.89.57.6.15.1.1
rldot1sMstpInstanceVlanId1To1024 first VlanId List of specific MSTP instance.	VlanList1 Type Constraints: range: 0..128	.1.3.6.1.4.1.89.57.6.15.1.2
rldot1sMstpInstanceVlanId1025To2048 second VlanId List of specific MSTP instance.	VlanList2 Type Constraints: range: 0..128	.1.3.6.1.4.1.89.57.6.15.1.3
rldot1sMstpInstanceVlanId2049To3072 third VlanId List of specific MSTP instance.	VlanList3 Type Constraints: range: 0..128	.1.3.6.1.4.1.89.57.6.15.1.4
rldot1sMstpInstanceVlanId3073To4094 fourth VlanId List of specific MSTP instance.	VlanList4 Type Constraints: range: 0..128	.1.3.6.1.4.1.89.57.6.15.1.5