rldot1dStpDisabledPortStateTable

RADLAN-BRIDGEMIBOBJECTS-MIB · .1.3.6.1.4.1.89.57.2.26

Object

table

Define stp port state for each stp disabled interface.
This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port.
The MIB contains only stp disabled ports entries

Context

MIB: RADLAN-BRIDGEMIBOBJECTS-MIB
OID: .1.3.6.1.4.1.89.57.2.26
Type: table
Status: current
Parent: rldot1dStp
Siblings: 25
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rldot1dStpMibVersion MIB's version, the current version is 2.	scalar	Integer32	`.1.3.6.1.4.1.89.57.2.1`
rldot1dStpMonitorTime Factor of hello-time during which a port is monotored to determine if it is stable.	scalar	Integer32	`.1.3.6.1.4.1.89.57.2.10`
rldot1dStpBpduCount The number of bpdu that need to received for the link to be considered stable.	scalar	Integer32	`.1.3.6.1.4.1.89.57.2.11`
rldot1dStpLastChanged The last time any object in this table was changed by SNMP or other local management means.	scalar	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.89.57.2.12`
rldot1dStpPortTable A table that contains extended pair port specific information.	table	-	`.1.3.6.1.4.1.89.57.2.13`
rldot1dStpPortsEnable Enable / Disable spanning tree on ports by default .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.14`
rldot1dStpTaggedFlooding flooding can be done in tagged bpdu .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.15`
rldot1dStpPortBelongToVlanDefault The default value of rldot1dStpPortMustBelongToVlan .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.16`
rldot1dStpEnableByDefault The default value of rldot1dStpEnable .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.17`
rldot1dStpPortToDefault To order port/s to revert to default setings .	scalar	Integer32	`.1.3.6.1.4.1.89.57.2.18`
rldot1dStpSupportedType The type of stp supported by the device.	scalar	Enumeration	`.1.3.6.1.4.1.89.57.2.19`
rldot1dStpType Specifies whether the device supports Spanning Tree per device, or per group.	scalar	Enumeration	`.1.3.6.1.4.1.89.57.2.2`
rldot1dStpEdgeportSupportInStp If EdgePort is supported in stpCompatible mode .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.20`
rldot1dStpFilterBpdu Specified if the device should filter BPDUs when STP is disabled.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.21`
rldot1dStpFloodBpduMethod Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging.	scalar	Enumeration	`.1.3.6.1.4.1.89.57.2.22`
rldot1dStpSeparatedBridges	node	-	`.1.3.6.1.4.1.89.57.2.23`
rldot1dStpPortBpduGuardTable A table that contains for each port whether it is bpdu guard .	table	-	`.1.3.6.1.4.1.89.57.2.24`
rldot1dStpLoopbackGuardEnable Define if STP loopback guard feature is globally enabled.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.25`
rldot1dStpEnable Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.3`
rldot1dStpPortMustBelongToVlan Specifies whether a port must belong to a VLAN in order to participate in the STP.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.4`
rldot1dStpExtendedPortNumberFormat Specifies whether the STP uses the extended port fnumber format.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.89.57.2.5`
rldot1dStpVlanTable A table that contains vlan-specific information for the Spanning Tree Protocol.	table	-	`.1.3.6.1.4.1.89.57.2.6`
rldot1dStpVlanPortTable A table that contains pair <vlan, port> specific information for the Spanning Tree Protocol.	table	-	`.1.3.6.1.4.1.89.57.2.7`
rldot1dStpTrapVariable	node	-	`.1.3.6.1.4.1.89.57.2.8`
rldot1dStpTypeAfterReset New mode of spaning tree supported by the device after the next reset.	scalar	Enumeration	`.1.3.6.1.4.1.89.57.2.9`

Child Objects