twampPeerActivateDuration
RAD-TEST-MIB ·
.1.3.6.1.4.1.164.6.1.15.2.7.1.5
Object
Duration test sessions in minutes. Zero value presents for ever test duration. Duration parameter value distinguish between test in continuous or non-continuous mode.
Context
- MIB
- RAD-TEST-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.2.7.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- minutes
- Parent
- twampPeerEntry
- Table
- twampPeerTable
- Siblings
- 12
Syntax
minutes SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| twampPeerAddrType The address type of IP Address associated to twamp peer responder and
an entry index. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.1.15.2.7.1.1 |
| twampPeerElapsedTime The number of seconds that have elapsed since activation of
the peer. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.2.7.1.10 |
| twampPeerDescr Description of the current peer entry.
Default description will be: '' (peer's ipv4/ipv6 address) | column | OctetString | .1.3.6.1.4.1.164.6.1.15.2.7.1.11 |
| twampPeerLastCalcMode Peer's calculation mode configuration for last active sessions. Copy of
twampPeerCalcMode on peer activation. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.7.1.12 |
| twampPeerLastResponderSeqNum Peer's 'responder sequence number' configuration for last active
sessions.
copy of twampPeerResponderSeqNum on peer activation. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.7.1.13 |
| twampPeerAddr The IP Address associated to twamp peer responder and and an entry
index. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.1.15.2.7.1.2 |
| twampPeerRowStatus This object enables creation and deletion of Controller's peers. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.1.15.2.7.1.3 |
| twampPeerActivateCmd Command to activate all Peer's test sessions.
off - initial mode, peer's tests are not active.
on - peer's tests are active. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.7.1.4 |
| twampPeerStartDateAndTime The date and time when peer activation had started.
If the peer was never activated a null value is returned. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.6.1.15.2.7.1.6 |
| twampPeerCalcMode Peer metrics calculation mode - round-trip, one-way or one-way - Responder Agnostic
Delay Measurements. This parameter is not relevant when using ICMP-Echo protocol. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.7.1.7 |
| twampPeerResponderSeqNum Peer metrics calculation awareness to a responder that transmits
independent sequence number.
This parameter is not relevant when using ICMP-Echo protocol. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.7.1.8 |
| twampPeerResponderTodStatus The TOD (Time Of Day) status of the peer's responder in one-way
calculation mode.
Status options:
outOfSync - TOD is out of sync.
sync - TOD is sync.
unknown - TOD st… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.7.1.9 |