RAD-TEST-MIB Table View

This table includes the profiles for 'Test Network Element
Performance'.

tstNePerfRepProfileEntry row .1.3.6.1.4.1.164.6.1.15.1.1.1

An entry in table.

Indexes

tstNePerfRepProfileId

Column	Syntax	OID
tstNePerfRepProfileId The profile ID index	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.1.1.1
tstNePerfRepProfileName The profile Name	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.1.15.1.1.1.2
tstNePerfRepProfileRowStatus This object enables creation and deletion of Profiles	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.1.1.1.3
tstNePerfRepProfileFrameSize Frame size in Bytes units.	RadTestPerfRepFrameSizer/w Type Values: 0 s64 1 s128 2 s256 3 s512 4 s1024 5 s1280 6 s1518 7 s1700 8 s1900 9 s2000 10 s2048 11 s4096 12 s9600 13 custom	.1.3.6.1.4.1.164.6.1.15.1.1.1.4
tstNePerfRepProfilePattern The pattern at the test frame payload.	Enumerationr/w Enumerated Values: 1 notApplicable 2 allOnes 3 allZerosWithoutCrc 4 allZerosWithCrc 5 alternate 6 prbsWithCrc 7 prbsWithoutCrc	.1.3.6.1.4.1.164.6.1.15.1.1.1.5
tstNePerfRepProfileDirection The direction of the test	Enumerationr/w Enumerated Values: 1 notApplicable 2 uniDirectional 3 biDirectional	.1.3.6.1.4.1.164.6.1.15.1.1.1.6
tstNePerfRepProfileTlv The type of date to test. test - The NE shall check if the frame exist data - The NE shall check the frames was damaged.	Enumerationr/w Enumerated Values: 1 test 2 data	.1.3.6.1.4.1.164.6.1.15.1.1.1.7
tstNePerfRepProfileNumberOfFramesInOneBurst The number of frames that shall be send in one burst.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.1.1.8
tstNePerfRepProfileFrameLossTolerance Frame Loss Tolerance in thousandth (1/1000)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.1.1.9
tstNePerfRepProfileBinarySearchResolution Binary Search Resolution in thousandth (1/1000) the minimal step in the binary search (for throughput test)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.1.1.10
tstNePerfRepProfileNumberOfTrials Number of repetition of the test	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.1.1.11
tstNePerfRepProfileLearningFramesMode Learning Frames Mode	Enumerationr/w Enumerated Values: 2 none 3 once 4 oncePerTrial	.1.3.6.1.4.1.164.6.1.15.1.1.1.12
tstNePerfRepProfileLearningFrames Number of learning frames	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.1.1.13
tstNePerfRepProfileCustomSize A user configurable frame size to be used in the tests. Relevant only when the scustom (13) bit is set to tstNePerfRepProfileFrameSize.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.1.1.14
tstNePerfRepProfileTransmitLck This Object determines whether Lock indication will be sent in user direction during the test.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.164.6.1.15.1.1.1.15

This is an helping table that defines the flows that are associated 
to a MEP having same MEP's classification characteristics.

tstMepFlowEntry row .1.3.6.1.4.1.164.6.1.15.1.2.1

The agent is creating entries in this table.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier tstMepFlowIndex

Column	Syntax	OID
tstMepFlowIndex A running index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.2.1.1
tstMepFlowFlowIdx This attribute defines a unique Flow. The value points to MEF-R.flowIdx1 and MEF-R.flowIdx2 indices.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.164.6.1.15.1.2.1.2

This table contains configuration profiles to be used in Y.1564 tests.
          
In general a profile is suitable for both generators and responders,
however a few attributes are relevant only for one of the functions.
The exceptions are indicated in the description clause of the respective
objects.

ituSatProfileEntry row .1.3.6.1.4.1.164.6.1.15.1.3.1

An entry in Y.1564 profile table.

A row cannot be deleted if the profile is associated to a test.
A row cannot be modified if the profile is associated to a test that
is currently in progress.

…

Indexes

ituSatProfileIndex

Column	Syntax	OID
ituSatProfileIndex A unique number as profile identifier.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.3.1.1
ituSatProfileName A meaningful printable profile name.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.1.15.1.3.1.2
ituSatProfileRowStatus This object enables creation and deletion of profiles.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.1.3.1.3
ituSatProfileEtherType The EtherType of the test frames.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.164.6.1.15.1.3.1.4
ituSatProfileFrameSize The size of test frames. This size refers to the total number of bytes in the frame including the header and trailer of the frame but excluding the tag structure. C-tag and S-tag, if present, shall augmen…	bytesUnsigned32r/w Constraints: range: 64-12000	.1.3.6.1.4.1.164.6.1.15.1.3.1.5
ituSatProfileUniFlrThreshold The service acceptance criteria for unidirectional Frame Loss Ratio. This object is relevant only for generators.	ppmUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.3.1.6
ituSatProfileUniFtdThreshold The service acceptance criteria for unidirectional Frame Transfer Delay. This object is relevant only for generators.	micro secondsUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.3.1.7
ituSatProfileUniFdvThreshold The service acceptance criteria for unidirectional Frame Delay Variation. This object is relevant only for generators.	micro secondsUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.3.1.8
ituSatProfileUniAvailThreshold The service acceptance criteria for unidirectional Availability. This object is relevant only for generators.	hundredth of percentUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.164.6.1.15.1.3.1.9
ituSatProfileBiFlrThreshold The service acceptance criteria for bidirectional Frame Loss Ratio. This object is relevant only for generators.	ppmUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.3.1.10
ituSatProfileBiFtdThreshold The service acceptance criteria for bidirectional Frame Transfer Delay. This object is relevant only for generators.	micro secondsUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.3.1.11
ituSatProfileBiFdvThreshold The service acceptance criteria for bidirectional Frame Delay Variation. This object is relevant only for generators.	micro secondsUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.3.1.12
ituSatProfileBiAvailThreshold The service acceptance criteria for bidirectional Availability. This object is relevant only for generators.	hundredth of percentUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.164.6.1.15.1.3.1.13
ituSatProfileScope The scope of the test: configuration test, performance test, or both phases. This object is relevant only for generators.	Bitsr/w Enumerated Values: 0 configuration 1 performance	.1.3.6.1.4.1.164.6.1.15.1.3.1.14
ituSatProfileDirection The direction in which the test is performed.	Enumerationr/w Enumerated Values: 1 unidirectional 2 bidirectional	.1.3.6.1.4.1.164.6.1.15.1.3.1.15
ituSatProfileColorMode The color mode that is used for the test.	Enumerationr/w Enumerated Values: 1 colorAware 2 colorBlind	.1.3.6.1.4.1.164.6.1.15.1.3.1.16
ituSatProfileTrafficPolicing Allows to include or exclude the traffic policing sub-test from the configuration phase.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.164.6.1.15.1.3.1.17
ituSatProfileCirSteps The transmission rate in each step of the CIR sub-test, configurable as percentage of CIR. The last transmission rate must be 100% CIR therefore only up to 3 additional rates are configurable. Unused step…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.164.6.1.15.1.3.1.18
ituSatProfileConfDuration The duration of the configuration test. This duration is used for each tested P-bit. This object is relevant only for generators.	secondsUnsigned32r/w Constraints: range: 18-360	.1.3.6.1.4.1.164.6.1.15.1.3.1.19
ituSatProfilePerfDuration The duration of the performance test. This object is relevant only for generators.	minutesUnsigned32r/w Constraints: range: 1-7200	.1.3.6.1.4.1.164.6.1.15.1.3.1.20
ituSatProfileRateConvention Indicates whether rate measurements are be shown in the test report as 'data-rate' (IR) or converted to 'line rate' (ULR). This object is relevant only for generators.	Enumerationr/w Enumerated Values: 1 dataRate 2 lineRate	.1.3.6.1.4.1.164.6.1.15.1.3.1.21
ituSatProfileResponderType The type of the responder. This object is relevant only for generators.	Enumerationr/w Enumerated Values: 1 y1564 2 macSwapLoopback 3 mef46Ll	.1.3.6.1.4.1.164.6.1.15.1.3.1.22

This table contains configuration profiles, at the P-bit level, to be
used in Y.1564 tests.
          
The values in a row of this table override the values of the
corresponding row of ituSatProfileTable.
          
This table is relevant only for generators.

ituSatProfilePbitEntry row .1.3.6.1.4.1.164.6.1.15.1.4.1

An entry in Y.1564 profile P-bit table.

When a row is created, the ituSatProfileIndex must point to an
already existing row of ituSatProfileTable.

A row cannot be deleted if the profile is asso…

Indexes

ituSatProfileIndex ituSatProfilePbitIndex

Column	Syntax	OID
ituSatProfilePbitIndex A single P-bit to which the configuration in this table applies.	RadTestPbitIndex Type Values: 0 pbit0 1 pbit1 2 pbit2 3 pbit3 4 pbit4 5 pbit5 6 pbit6 7 pbit7	.1.3.6.1.4.1.164.6.1.15.1.4.1.1
ituSatProfilePbitRowStatus This object enables creation and deletion of P-bit profiles.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.1.4.1.2
ituSatProfilePbitFrameSize The size of test frames. This size refers to the total number of bytes in the frame including the header and trailer of the frame but excluding the tag structure. C-tag and S-tag, if present, shall augmen…	bytesUnsigned32r/w Constraints: range: 64-12000	.1.3.6.1.4.1.164.6.1.15.1.4.1.3
ituSatProfilePbitUniFlrThreshold The service acceptance criteria for unidirectional Frame Loss Ratio.	ppmUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.4.1.4
ituSatProfilePbitUniFtdThreshold The service acceptance criteria for unidirectional Frame Transfer Delay.	micro secondsUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.4.1.5
ituSatProfilePbitUniFdvThreshold The service acceptance criteria for unidirectional Frame Delay Variation.	micro secondsUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.4.1.6
ituSatProfilePbitUniAvailThreshold The service acceptance criteria for unidirectional Availability.	hundredth of percentUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.164.6.1.15.1.4.1.7
ituSatProfilePbitBiFlrThreshold The service acceptance criteria for bidirectional Frame Loss Ratio.	ppmUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.4.1.8
ituSatProfilePbitBiFtdThreshold The service acceptance criteria for bidirectional Frame Transfer Delay.	micro secondsUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.4.1.9
ituSatProfilePbitBiFdvThreshold The service acceptance criteria for bidirectional Frame Delay Variation.	micro secondsUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.164.6.1.15.1.4.1.10
ituSatProfilePbitBiAvailThreshold The service acceptance criteria for bidirectional Availability.	hundredth of percentUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.164.6.1.15.1.4.1.11

This table includes the profiles for TWAMP test sessions.

twampTestProfileEntry row .1.3.6.1.4.1.164.6.1.15.1.5.1

An entry in table.

Indexes

twampTestProfileId

Column	Syntax	OID
twampTestProfileId A unique number as test profile identifier.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.5.1.1
twampTestProfileRowStatus This object enables creation and deletion of Profiles.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.1.5.1.2
twampTestProfileName The profile Name and the profile index.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.1.15.1.5.1.3
twampTestProfilePayloadLength Test session packets payload size in Bytes units.	bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.5.1.4
twampTestProfileTxRate Test session packets transmit rate in PPS.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.5.1.5
twampTestProfileLossTimeout Test session loss timeout in micro-sec.	micro secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.5.1.6
twampTestProfileLossRatioThreshold Test session loss timeout in PPM.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.5.1.7
twampTestProfileDelayThreshold Test session delay threshold loss in micro-sec.	micro secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.5.1.8
twampTestProfileDelayVarThreshold Test session delay thresholdloss in micro-sec.	micro secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.1.5.1.9
twampTestProfileDelayVarEventType Delay variation event type to define on which metric the delay threshold will be operated. Event options: pdvMax - pdv value. ipdvMax - ipdv max value.	Enumerationr/w Enumerated Values: 2 pdvMax 3 ipdvMax	.1.3.6.1.4.1.164.6.1.15.1.5.1.10

This table contains configuration for RFC2544 tests.

tstNePerfRepTestEntry row .1.3.6.1.4.1.164.6.1.15.2.1.1

An entry in table.

Indexes

tstNePerfRepTestId

Column	Syntax	OID
tstNePerfRepTestId The Test ID	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.1.1.1
tstNePerfRepTestRowStatus This object enables creation and deletion of entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.1.1.2
tstNePerfRepTestType The type of the test.	Bitsr/w Enumerated Values: 0 throughput 1 frameloss 2 latency	.1.3.6.1.4.1.164.6.1.15.2.1.1.3
tstNePerfRepTestProfileId The index of the test Profile.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.1.1.4
tstNePerfRepTestEntity The OID number of the fifth index from ethOamDestNeTable that the test shall run on.	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.164.6.1.15.2.1.1.5
tstNePerfRepTestActivation The cmd to run the test. The test can be activate in future time using the parameter dateAndTime (3) or daily (4).	Enumerationr/w Enumerated Values: 1 off 2 now 3 dateAndTime 4 daily 255 cancelTest	.1.3.6.1.4.1.164.6.1.15.2.1.1.6
tstNePerfRepTestStatus The current status of the test: adminOff - Canceled by the user. inProgress - The test is in progress. pending - The test will be run according to the dateAndTime or daily. completed - The test was completed. timeOut …	Enumeration Enumerated Values: 1 adminOff 2 inProgress 3 pending 4 completed 5 timeOut	.1.3.6.1.4.1.164.6.1.15.2.1.1.7
tstNePerfRepTestActivationDateAndTime Date And Time in which Test will be carried.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.164.6.1.15.2.1.1.8
tstNePerfRepTestActivationRecurrenceTime Time of Day in which test will be recurrence. Date fields (Year/Month/Date) may be discarded	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.1.1.9
tstNePerfRepTestMaxRate The maximal theoretical FPS (Frames per second) for this run, set by the user to reflect the limitation on this Channel.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.1.1.10
tstNePerfRepTestElapsedTime The number of hundredths of seconds that have elapsed since the beginning of the Test.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.1.1.11
tstNePerfRepTestResetResults Reset all test's iteration results.	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.6.1.15.2.1.1.12
tstNePerfRepTestRateConvention Indicates whether the tstNePerfRepTestMaxRate is expressed in line-rate or in data-rate. Default value is dataRate(3).	Enumerationr/w Enumerated Values: 2 lineRate 3 dataRate	.1.3.6.1.4.1.164.6.1.15.2.1.1.13
tstNePerfRepTestFrameCompensation The number of bytes to add to the actual transmitted frame size. This addition is not taken into consideration in the throughput bit rate result. Default value is zero.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.1.1.14
tstNePerfRepTestMaxTestDuration An upper limit to the test duration in minutes.	Unsigned32r/w Constraints: range: 2-60	.1.3.6.1.4.1.164.6.1.15.2.1.1.15
tstNePerfRepTestAssociatedFlow The OID number of the 2 indexes of the flow associated with the test. The BW profile and QoS of this flow is taken into account in the test. Default value is zero i.e. no flow configured for the test.	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.164.6.1.15.2.1.1.16

This table contains a list of generator entities used in Y.1564 tests.
The table allows creation, configuration and activation of test
sessions.
For each test that was actually performed, the table also holds basic
information and a summary report.

ituSatGeneratorEntry row .1.3.6.1.4.1.164.6.1.15.2.2.1

An entry in Y.1564 generator table.

A row cannot be modified or deleted while the test is running
(indicated by ituSatGeneratorStatus = inProgress(3)).

When a row is deleted all the correspondi…

Indexes

ituSatGeneratorIndex

Column	Syntax	OID
ituSatGeneratorIndex A unique number as generator identifier.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.2.1.1
ituSatGeneratorName A meaningful printable generator name.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.1.15.2.2.1.2
ituSatGeneratorRowStatus This object enables creation and deletion of Y.1564 generators.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.2.1.3
ituSatGeneratorServicePointer The service under test. The service can be represented by: 1. An MA that contains one or more MEPs 2. A single multi-CoS flow 3. Mutiple single-CoS flows 4. Service name + egress port When MA is used, the…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.164.6.1.15.2.2.1.4
ituSatGeneratorProvisionedPbits A list of the P-bit values that are requested to be tested. When no P-bits where specified all the P-bits that were pre-configured for the service are tested (the found P-bits are listed in ituSatGenerato…	RAD-TCRadTestPbitValuesr/w Type Values: 0 pbit0Val 1 pbit1Val 2 pbit2Val 3 pbit3Val 4 pbit4Val 5 pbit5Val 6 pbit6Val 7 pbit7Val	.1.3.6.1.4.1.164.6.1.15.2.2.1.5
ituSatGeneratorProfile The profile used in the test.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.2.1.6
ituSatGeneratorCmd A command to activate or de-activate the test at the generator side. If sanity checks prevent the test activation then a set to start(1) shall be rejected with an SNMP error. Upon successfu…	Enumerationr/w Enumerated Values: 1 stop 2 start	.1.3.6.1.4.1.164.6.1.15.2.2.1.7
ituSatGeneratorConfChanged Indication whether the configuration of the test was changed after the test was completed. If the configuration was changed then threshold values should not be shown in a detailed report (there is no trac…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.164.6.1.15.2.2.1.8
ituSatGeneratorStatus The current status of the test (generator): Idle - some of the mandatory attributes were not configured yet. Ready - all the mandatory configurations were done. In progress - the t…	Enumeration Enumerated Values: 1 idle 2 ready 3 inProgress 4 passed 5 failed 6 userAborted 7 systemAborted 8 llFailure	.1.3.6.1.4.1.164.6.1.15.2.2.1.9
ituSatGeneratorTimeRemaining The time remaining till the end of the test. If the test is not in progress a value of zero is returned.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.2.1.10
ituSatGeneratorCurrentPhase The current phase of the test. If the test is not in progress the value idle(1) is returned.	Enumeration Enumerated Values: 1 idle 2 configuration 3 performance	.1.3.6.1.4.1.164.6.1.15.2.2.1.11
ituSatGeneratorDestination A MAC address that identifies the responder side. Is equal to the provisioned destination when the value of ituSatGeneratorProvisionedDestination is not zero. If the MAC is unknown a value …	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.1.15.2.2.1.12
ituSatGeneratorSource The MAC address of the local MEP. If the MAC is unknown a value of '000000000000'H is returned.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.1.15.2.2.1.13
ituSatGeneratorInnerTag The value of the inner VLAN (usually C-Tag). If there is no inner tag or its value is not known, a value of zero is returned.	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.164.6.1.15.2.2.1.14
ituSatGeneratorOuterTag The value of the outer VLAN (usually S-Tag). If there is no outer tag or its value is not known, a value of zero is returned.	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.164.6.1.15.2.2.1.15
ituSatGeneratorTestedPbits A list of the P-bit values that were actually tested. For untagged EVC a value of zero is returned. If the P-bit values are not known a value of zero is returned.	RAD-TCRadTestPbitValues Type Values: 0 pbit0Val 1 pbit1Val 2 pbit2Val 3 pbit3Val 4 pbit4Val 5 pbit5Val 6 pbit6Val 7 pbit7Val	.1.3.6.1.4.1.164.6.1.15.2.2.1.16
ituSatGeneratorStartTime The date and time at the last test activation. If the test was never activated a null value is returned.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.164.6.1.15.2.2.1.17
ituSatGeneratorEndTime The date and time when the last test was ended (regardless of the end result passed/failed/aborted). If the test is in progress or was never activated a null value is returned.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.164.6.1.15.2.2.1.18
ituSatGeneratorTimeElapsed For an in progress test - the elapsed time of the current test. For a completed test - the duration of the last test. If the test was never activated a zero value is returned.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.2.1.19
ituSatGeneratorConfResult The result of the last configuration test. The value notApplicable(1) is returned in the following cases: - The configuration test was not performed in the last test. - The configuration test is currently…	RAD-TCRadTestResult Type Values: 1 notApplicable 2 passed 3 failed 4 userAborted 5 systemAborted 6 llFailure	.1.3.6.1.4.1.164.6.1.15.2.2.1.20
ituSatGeneratorPerfResult The result of the last performance test. The value notApplicable(1) is returned in the following cases: - The performance test was not performed in the last test. - The performance test is currently in pr…	RAD-TCRadTestResult Type Values: 1 notApplicable 2 passed 3 failed 4 userAborted 5 systemAborted 6 llFailure	.1.3.6.1.4.1.164.6.1.15.2.2.1.21
ituSatGeneratorConfDuration The duration of the configuration test. This object is a copy of the corresponding object in the profile. The duplication is done to keep the report valid even if the profile was modified after the test c…	secondsUnsigned32 Constraints: range: 18-360	.1.3.6.1.4.1.164.6.1.15.2.2.1.22
ituSatGeneratorPerfDuration The duration of the performance test. This object is a copy of the corresponding object in the profile and is used for availability calculation. The duplication is done to keep the report valid even if th…	minutesUnsigned32 Constraints: range: 5-7200	.1.3.6.1.4.1.164.6.1.15.2.2.1.23
ituSatGeneratorScope The scope of the test: configuration test, performance test, or both phases. This object is a copy of the corresponding object in the profile. The duplication is done to keep the report valid even if the profile was mod…	Bits Enumerated Values: 0 configuration 1 performance	.1.3.6.1.4.1.164.6.1.15.2.2.1.24
ituSatGeneratorServiceBinding The method used to associate the EVC to the test. The EVC can be represented by: 1. An MA that contains one or more MEPs 2. A single multi-CoS flow 3. Mutiple single-CoS flows 4. Service name + egress port	Enumerationr/w Enumerated Values: 1 ma 2 singleMultiCosFlow 3 multipleSingleCosFlows 4 serviceNameAndEgressPort	.1.3.6.1.4.1.164.6.1.15.2.2.1.25
ituSatGeneratorServiceName The name of the tested service. The combined values of this object, the ituSatGeneratorEgressPort and ituSatGeneratorProvisionedPbits are used to find the corresponding flows in the flowTable. …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.164.6.1.15.2.2.1.26
ituSatGeneratorEgressPort The physical or logical port through which the tested service is transmitted towards the network. The combined values of this object, the ituSatGeneratorServiceName and ituSatGeneratorProvisionedPbits are…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.6.1.15.2.2.1.27
ituSatGeneratorProvisionedDestination A configurable MAC address that identifies the responder side. Either this object or ituSatGeneratorRemoteMep may be set to a value different than zero, but not both.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.1.15.2.2.1.28

This table contains information about pre-configured flows and MEPs
that are used by each Y.1564 generator.

ituSatGeneratorFlowEntry row .1.3.6.1.4.1.164.6.1.15.2.3.1

An entry in Y.1564 generator flow table.

Rows are automatically created when the status of the corresponding
generator in the ituSatGeneratorTable changes to ready(2).

When a generator in the i…

Indexes

ituSatGeneratorIndex ituSatGeneratorFlowPbitIndex

Column	Syntax	OID
ituSatGeneratorFlowPbitIndex This index allows to show flow/MEP per P-bit. One entry for each set P-bit in the ituSatGeneratorTestedPbits. If the ituSatGeneratorTestedPbits is zero i.e. untagged EVC, then there is a single entry with…	RadTestPbitIndex Type Values: 0 pbit0 1 pbit1 2 pbit2 3 pbit3 4 pbit4 5 pbit5 6 pbit6 7 pbit7	.1.3.6.1.4.1.164.6.1.15.2.3.1.1
ituSatGeneratorFlowNameTx The name of the egress flow.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.1.15.2.3.1.2
ituSatGeneratorFlowNameRx The name of the ingress flow.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.1.15.2.3.1.3
ituSatGeneratorFlowCir The Committed Information Rate provisioned for the egress flow. The value is taken from the associated bandwith profile.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.3.1.4
ituSatGeneratorFlowEir The Excessive Information Rate provisioned for the egress flow. The value is taken from the associated bandwith profile.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.3.1.5
ituSatGeneratorFlowAssociatedMEP The identifier of the MEP that is associated with the generator and specific P-bit.	Unsigned32 Constraints: range: 1-8191	.1.3.6.1.4.1.164.6.1.15.2.3.1.6
ituSatGeneratorFlowAssociatedService The identifier of the service that is associated with the generator and specific P-bit. A value of zero is reserved for the case of automatic CoS completion.	Unsigned32 Constraints: range: 0-8	.1.3.6.1.4.1.164.6.1.15.2.3.1.7
ituSatGeneratorFlowBwpInUse Indicates what is the origin of the associated bandwidth profile for the EVC.CoS.	Enumeration Enumerated Values: 1 flow 2 test	.1.3.6.1.4.1.164.6.1.15.2.3.1.8

This table contains a list of responder entities used in Y.1564 tests.
The table allows creation, configuration and activation of test
responders.

ituSatResponderEntry row .1.3.6.1.4.1.164.6.1.15.2.4.1

An entry in Y.1564 responder table.

A row cannot be modified while the test is enabled
(indicated by ituSatResponderStatus = inProgress(3)).

When a row is deleted all the corresponding rows in …

Indexes

ituSatResponderIndex

Column	Syntax	OID
ituSatResponderIndex A unique number as responder identifier.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.4.1.1
ituSatResponderName A meaningful printable responder name.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.1.15.2.4.1.2
ituSatResponderRowStatus This object enables creation and deletion of Y.1564 responders.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.4.1.3
ituSatResponderServicePointer The service under test. The service can be represented by: 1. An MA that contains one or more MEPs 2. A single multi-CoS flow 3. Mutiple single-CoS flows 4. Service name + egress port When MA is used, the…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.164.6.1.15.2.4.1.4
ituSatResponderProfile The profile used in the test.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.4.1.5
ituSatResponderCmd A command to activate or de-activate the test at the responder side. If sanity checks prevent the test activation then a set to start(1) shall be rejected with an SNMP error. Upon successfu…	Enumerationr/w Enumerated Values: 1 stop 2 start	.1.3.6.1.4.1.164.6.1.15.2.4.1.6
ituSatResponderStatus The current status of the test (responder): Idle - some of the mandatory attributes were not configured yet. Ready - all the mandatory configurations were done. In progress - the test …	Enumeration Enumerated Values: 1 idle 2 ready 3 inProgress	.1.3.6.1.4.1.164.6.1.15.2.4.1.7
ituSatResponderServiceBinding The method used to associate the EVC to the test. The EVC can be represented by: 1. An MA that contains one or more MEPs 2. A single multi-CoS flow 3. Mutiple single-CoS flows 4. Service name + egress port	Enumerationr/w Enumerated Values: 1 ma 2 singleMultiCosFlow 3 multipleSingleCosFlows 4 serviceNameAndEgressPort	.1.3.6.1.4.1.164.6.1.15.2.4.1.8
ituSatResponderServiceName The name of the tested service. The combined values of this object and ituSatResponderEgressPort are used to find the corresponding flows in the flowTable. This object is only relevant when…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.164.6.1.15.2.4.1.9
ituSatResponderEgressPort The physical or logical port through which the tested service is transmitted towards the network. The combined values of this object and ituSatResponderServiceName are used to find the corresponding flows…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.6.1.15.2.4.1.10

This table contains bandwidth profiles, at the P-bit level, to be
used in Y.1564 tests.
          
A bandwidth profile defined in this table overrides the policer
configuration at the corresponding flow.
          
This table is relevant only for generators.

ituSatGeneratorPolicerEntry row .1.3.6.1.4.1.164.6.1.15.2.5.1

An entry in Y.1564 policer profile P-bit table.

When a row is created, the ituSatGeneratorIndex must point
to an already existing row of ituSatGeneratorTable.

There is no coupling between ituSa…

Indexes

ituSatGeneratorIndex ituSatGeneratorPolicerPbitIndex

Column	Syntax	OID
ituSatGeneratorPolicerPbitIndex A single P-bit to which the configuration in this table applies.	RadTestPbitIndex Type Values: 0 pbit0 1 pbit1 2 pbit2 3 pbit3 4 pbit4 5 pbit5 6 pbit6 7 pbit7	.1.3.6.1.4.1.164.6.1.15.2.5.1.1
ituSatGeneratorPolicerRowStatus This object enables creation and deletion of per P-bit bandwidth profiles.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.5.1.2
ituSatGeneratorPolicerCir This attribute defines the Committed Information Rate for the EVC.CoS. Ignored when the value of ituSatGeneratorPolicerProfile is not zero.	kbpsSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.5.1.3
ituSatGeneratorPolicerCbs This attribute defines the Committed Burst Size for the EVC.CoS. Ignored when the value of ituSatGeneratorPolicerProfile is not zero.	bytesSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.5.1.4
ituSatGeneratorPolicerEir This attribute defines the Excessive Information Rate for the EVC.CoS. Ignored when the value of ituSatGeneratorPolicerProfile is not zero.	kbpsSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.5.1.5
ituSatGeneratorPolicerEbs This attribute defines the Excessive Burst Size for the EVC.CoS. Ignored when the value of ituSatGeneratorPolicerProfile is not zero.	bytesSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.5.1.6
ituSatGeneratorPolicerProfile An optional pre-defined policer profile to be used in the test. May be set to the value of an existing instance of bwProfileIndex in MEF-R.bwProfileTable. In this case the values of ituSatGeneratorPolicer…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.5.1.7

This table includes controller parameters.

twampControllerEntry row .1.3.6.1.4.1.164.6.1.15.2.6.1

An entry in table.

Indexes

twampControllerId

Column	Syntax	OID
twampControllerId A unique number as controller identifier.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.6.1.1
twampControllerRowStatus This object enables creation and deletion of Controllers	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.6.1.2
twampControllerName The controller Name and the controller index	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.1.15.2.6.1.3
twampControllerStatus The current status of a controller. Status options: adminOff - Cancelled by the user. idle - some of the mandatory attributes were not configured yet. ready - all the mandatory configuratio…	Enumeration Enumerated Values: 1 adminOff 2 idle 3 ready 4 inProgress	.1.3.6.1.4.1.164.6.1.15.2.6.1.4
twampControllerType Indicates twamp controller's type.	Enumerationr/w Enumerated Values: 2 twamp 3 twampLight	.1.3.6.1.4.1.164.6.1.15.2.6.1.5
twampControllerL2Probe Enables L2 probe mode.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.164.6.1.15.2.6.1.6
twampControllerIngressEgressPort Ingress and egress port ifIndex for layer 2 service definition in L2-probe mode.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.6.1.15.2.6.1.7
twampControllerOuterVlan Outer VLAN definition for layer 2 service definition in L2-probe mode. Value 4294967295 (0xFFFFFFFF) = Not Applicable.	Unsigned32r/w Constraints: range: 0-4095 range: 4294967295-4294967295	.1.3.6.1.4.1.164.6.1.15.2.6.1.8
twampControllerInnerVlan Inner VLAN definition for layer 2 service definition in L2-probe mode. Value 4294967295 (0xFFFFFFFF) = Not Applicable.	Unsigned32r/w Constraints: range: 0-4095 range: 4294967295-4294967295	.1.3.6.1.4.1.164.6.1.15.2.6.1.9
twampControllerOuterPbit Outer VLAN Pbit definition for layer 2 service definition in L2-probe mode. Values (0..7) represents a different 802.1 fixed P-bit value.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.6.1.15.2.6.1.10
twampControllerInnerPbit Inner VLAN Pbit definition for layer 2 service definition in L2-probe mode. Values (0..7) represents a different 802.1 fixed P-bit value.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.6.1.15.2.6.1.11
twampControllerRouterEntity The router entity which the controller belongs to.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.6.1.12
twampControllerLocalAddrType The address type of IP Address associated to twamp controller.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.6.1.15.2.6.1.13
twampControllerLocalAddr The IP Address associated to twamp controller.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.1.15.2.6.1.14
twampControllerAssociatedRI The ifIndex of the Router Interface associated with TWAMP controller.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.6.1.15.2.6.1.15
twampControllerTodStatus The TOD (Time Of Day) status of the controller in one-way calculation mode. Status options: outOfSync - TOD is out of sync. sync - TOD is sync. unknown - TOD status is unknown. notApplicable - TOD source …	Enumeration Enumerated Values: 1 unknown 2 outOfSync 3 sync 4 notApplicable	.1.3.6.1.4.1.164.6.1.15.2.6.1.16

This table includes controller's peer parameters.

twampPeerEntry row .1.3.6.1.4.1.164.6.1.15.2.7.1

An entry in table.

Indexes

twampControllerId twampPeerAddrType twampPeerAddr

Column	Syntax	OID
twampPeerAddrType The address type of IP Address associated to twamp peer responder and an entry index.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.6.1.15.2.7.1.1
twampPeerAddr The IP Address associated to twamp peer responder and and an entry index.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.1.15.2.7.1.2
twampPeerRowStatus This object enables creation and deletion of Controller's peers.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.7.1.3
twampPeerActivateCmd Command to activate all Peer's test sessions. off - initial mode, peer's tests are not active. on - peer's tests are active.	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.6.1.15.2.7.1.4
twampPeerActivateDuration Duration test sessions in minutes. Zero value presents for ever test duration. Duration parameter value distinguish between test in continuous or non-continuous mode.	minutesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.7.1.5
twampPeerStartDateAndTime The date and time when peer activation had started. If the peer was never activated a null value is returned.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.164.6.1.15.2.7.1.6
twampPeerCalcMode Peer metrics calculation mode - round-trip, one-way or one-way - Responder Agnostic Delay Measurements. This parameter is not relevant when using ICMP-Echo protocol.	Enumerationr/w Enumerated Values: 1 roundTrip 2 oneWay 3 oneWayRadm	.1.3.6.1.4.1.164.6.1.15.2.7.1.7
twampPeerResponderSeqNum Peer metrics calculation awareness to a responder that transmits independent sequence number. This parameter is not relevant when using ICMP-Echo protocol.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.164.6.1.15.2.7.1.8
twampPeerResponderTodStatus The TOD (Time Of Day) status of the peer's responder in one-way calculation mode. Status options: outOfSync - TOD is out of sync. sync - TOD is sync. unknown - TOD status is unknown.	Enumeration Enumerated Values: 1 unknown 2 outOfSync 3 sync	.1.3.6.1.4.1.164.6.1.15.2.7.1.9
twampPeerElapsedTime The number of seconds that have elapsed since activation of the peer.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.7.1.10
twampPeerDescr Description of the current peer entry. Default description will be: '' (peer's ipv4/ipv6 address)	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.164.6.1.15.2.7.1.11
twampPeerLastCalcMode Peer's calculation mode configuration for last active sessions. Copy of twampPeerCalcMode on peer activation.	Enumeration Enumerated Values: 1 roundTrip 2 oneWay 3 oneWayRadm	.1.3.6.1.4.1.164.6.1.15.2.7.1.12
twampPeerLastResponderSeqNum Peer's 'responder sequence number' configuration for last active sessions. copy of twampPeerResponderSeqNum on peer activation.	Enumeration Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.164.6.1.15.2.7.1.13

This table includes controller's test session parameters.

twampContSessionEntry row .1.3.6.1.4.1.164.6.1.15.2.8.1

An entry in table.

Indexes

twampControllerId twampPeerAddrType twampPeerAddr twampContSessionId

Column	Syntax	OID
twampContSessionId A unique number as controller test session identifier.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.8.1.1
twampContSessionRowStatus This object enables creation and deletion of test session (controller side).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.8.1.2
twampContSessionName The test session Name and and an entry index (controller side).	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.1.15.2.8.1.3
twampContSessionStartDateAndTime The date and time when test session had started. If the test was never activated a null value is returned.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.164.6.1.15.2.8.1.4
twampContSessionStatus The current status of a test session. Status options: idle - the controller which the test session related to is in 'notReady' status. ready - all the mandatory configurations wer…	Enumeration Enumerated Values: 2 idle 3 ready 4 inProgress 5 completed 6 userAborted 7 systemAborted	.1.3.6.1.4.1.164.6.1.15.2.8.1.5
twampContSessionLocalL4PortNumber The layer 4 source port number associated to twamp controller. This parameter is not relevant when using ICMP-Echo protocol.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.1.15.2.8.1.6
twampContSessionPeerL4PortNumber The layer 4 port number associated to twamp peer responder. This parameter is not relevant when using ICMP-Echo protocol. In case TWAMP control protocol is used, port value is negotiated with TWAMP server and the actual…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.1.15.2.8.1.7
twampContSessionPeerDscp The DSCP value to be use in the test session packets.	Unsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.164.6.1.15.2.8.1.8
twampContSessionTestProfileId The identifier of test profile to be use by the test session.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.8.1.9
twampContSessionTxPackets The number packets related to the test session that where transmitted successfully (controller side).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.6.1.15.2.8.1.10
twampContSessionRxPackets The number packets related to the test session that where received successfully (controller side).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.6.1.15.2.8.1.11
twampContSessionResult Bit map representing current interval test results related to Threshold Crossing Alerts (TCA). A bit is set when specific test has crossed its threshold.	Bits Enumerated Values: 0 lossTca 1 delayTca 2 dvTca	.1.3.6.1.4.1.164.6.1.15.2.8.1.12
twampContSessionConfChanged Indication whether the configuration of the test was changed after the test was completed.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.164.6.1.15.2.8.1.13
twampContSessionConvertedIndex This attribute defines the converted index assigned to this TWAMP Session.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.8.1.14
twampContSessionResultFwd Bit map representing current interval forward path test results related to Threshold Crossing Alerts (TCA). A bit is set when specific test has crossed its threshold.	Bits Enumerated Values: 0 lossTca 1 delayTca 2 dvTca	.1.3.6.1.4.1.164.6.1.15.2.8.1.15
twampContSessionResultBck Bit map representing current interval backward path test results related to Threshold Crossing Alerts (TCA). A bit is set when specific test has crossed its threshold.	Bits Enumerated Values: 0 lossTca 1 delayTca 2 dvTca	.1.3.6.1.4.1.164.6.1.15.2.8.1.16

This table includes responder parameters.

twampResponderEntry row .1.3.6.1.4.1.164.6.1.15.2.9.1

An entry in table.

Indexes

twampResponderId

Column	Syntax	OID
twampResponderId A unique number as responder identifier.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.9.1.1
twampResponderRowStatus This object enables creation and deletion of Responders	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.9.1.2
twampResponderName The responder Name and the responder index	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.1.15.2.9.1.3
twampResponderStatus The current status of a responder. Status options: adminOff - Cancelled by the user. notReady - some of the mandatory attributes were not configured yet. idle - all the mandatory configuration…	Enumeration Enumerated Values: 1 adminOff 2 idle 3 ready	.1.3.6.1.4.1.164.6.1.15.2.9.1.4
twampResponderType Indicates twamp responder's type.	Enumerationr/w Enumerated Values: 2 twamp 3 twampLight 4 udpEchoPlus	.1.3.6.1.4.1.164.6.1.15.2.9.1.5
twampResponderL2Probe Enables L2 probe mode.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.164.6.1.15.2.9.1.6
twampResponderIngressEgressPort Ingress and egress port for layer 2 service definition in L2-probe mode.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.6.1.15.2.9.1.7
twampResponderOuterVlan Outer VLAN definition for layer 2 service definition in L2-probe mode. Value 4294967295 (0xFFFFFFFF) = Not Applicable.	Unsigned32r/w Constraints: range: 0-4095 range: 4294967295-4294967295	.1.3.6.1.4.1.164.6.1.15.2.9.1.8
twampResponderInnerVlan Inner VLAN definition for layer 2 service definition in L2-probe mode. Value 4294967295 (0xFFFFFFFF) = Not Applicable.	Unsigned32r/w Constraints: range: 0-4095 range: 4294967295-4294967295	.1.3.6.1.4.1.164.6.1.15.2.9.1.9
twampResponderOuterPbit Outer VLAN Pbit definition for layer 2 service definition in L2-probe mode. Values (0..7) represents a different 802.1 fixed P-bit value. Value 254 represents copy original P-bit option.	Unsigned32r/w Constraints: range: 0-7 range: 254-254	.1.3.6.1.4.1.164.6.1.15.2.9.1.10
twampResponderInnerPbit Inner VLAN Pbit definition for layer 2 service definition in L2-probe mode. Values (0..7) represents a different 802.1 fixed P-bit value. Value 254 represents copy original P-bit option.	Unsigned32r/w Constraints: range: 0-7 range: 254-254	.1.3.6.1.4.1.164.6.1.15.2.9.1.11
twampResponderRouterEntity The router entity which the responder belongs to.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.9.1.12
twampResponderLocalAddrType The address type of IP Address associated to twamp responder.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.6.1.15.2.9.1.13
twampResponderLocalAddr The IP Address associated to twamp responder.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.1.15.2.9.1.14
twampResponderAssociatedRI The ifIndex of the Router Interface associated with TWAMP responder.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.6.1.15.2.9.1.15
twampResponderTxSeqNum Responder definition to transmit independent sequence number.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.164.6.1.15.2.9.1.16
twampResponderTxExtendedInfo Responder definition to interop mode. A responder with enabled interop mode sends proprietary information in TWAMP payload.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.164.6.1.15.2.9.1.17

This table includes responder's test session parameters.

twampResSessionEntry row .1.3.6.1.4.1.164.6.1.15.2.10.1

An entry in table.

Indexes

twampResponderId twampResSessionId

Column	Syntax	OID
twampResSessionId A unique number as responder test session identifier.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.10.1.1
twampResSessionRowStatus This object enables creation and deletion of responder's test session.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.10.1.2
twampResSessionName The responder test session Name and and an entry index.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.1.15.2.10.1.3
twampResSessionLocalL4PortNumber The layer 4 port number associated to twamp responder. This object is not relevant in case twampResponderType is configured to 'twamp', where session layer 4 port number is negotiated, set by the TWAMP server and is r…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.1.15.2.10.1.4
twampResSessionTxPackets The number packets related to the test session that where transmitted successfully (responder side).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.6.1.15.2.10.1.5
twampResSessionRxPackets The number packets related to the test session that where received successfully (responder side).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.6.1.15.2.10.1.6

This table specifies the flows that should be used in Y.1564 tests.
The flows that are pointed by this table must be single CoS flows.
          
The table is relevant for both generators and responders.

ituSatSingleCosFlowEntry row .1.3.6.1.4.1.164.6.1.15.2.15.1

An entry in Y.1564 single CoS flow table.

When a row is created, if the value of ituSatSingleCosFlowFunction is
generator(1):
1. The ituSatSingleCosFlowFunctionIndex must point to an already
existing row of…

Indexes

ituSatSingleCosFlowFunction ituSatSingleCosFlowFunctionIndex ituSatSingleCosFlowIdx1 ituSatSingleCosFlowIdx2

Column	Syntax	OID
ituSatSingleCosFlowFunction The type of the Y.1564 function. This inex object allows to define a single common table that can be used by both generators and responders.	Enumeration Enumerated Values: 1 generator 2 responder	.1.3.6.1.4.1.164.6.1.15.2.15.1.1
ituSatSingleCosFlowFunctionIndex The identifier of the generator or responder.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.15.1.2
ituSatSingleCosFlowIdx1 The value of rad.flowIdx1 of the associated flow.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.15.1.3
ituSatSingleCosFlowIdx2 The value of rad.flowIdx2 of the associated flow.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.2.15.1.4
ituSatSingleCosFlowRowStatus This object enables addition and deletion of single CoS flows to/from the Y.1564 test.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.1.15.2.15.1.5

This table includes the general status of each trial.
An entry in this table will be created upon activating a test
and shall be removed upon deleting a test.

tstNePerfRepGeneralResultsEntry row .1.3.6.1.4.1.164.6.1.15.3.1.1

An entry in table.

Indexes

tstNePerfRepTestId tstNePerfRepIteration tstNePerfRepGeneralResultsTestType tstNePerfRepGeneralResultsTrialNumber

Column	Syntax	OID
tstNePerfRepGeneralResultsTestType The type of the test. The value of this object shall be populated by the NE according to tstNePerfRepTestType	Enumeration Enumerated Values: 1 throughput 2 frameloss 3 latency	.1.3.6.1.4.1.164.6.1.15.3.1.1.1
tstNePerfRepGeneralResultsTrialNumber The test trail number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.1.1.2
tstNePerfRepGeneralResultsStatus The status of the trial.	Enumeration Enumerated Values: 1 success 2 fail 3 linkDown 4 oamConnectivityFailure 5 timeOut 255 notApplicable	.1.3.6.1.4.1.164.6.1.15.3.1.1.3
tstNePerfRepGeneralResultsDuration The duration of the trial (hundredths of seconds).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.1.1.4

This table indicates the throughput Report.
An entry in this table will be created upon activating the test and only
if the tstNePerfRepTestType = throughput (0)
          
The throughput test find out the maximum frame or bits
rate without lost frames the DUT can manage. The test
begins at 100% frame rate. If any frames are lost, the test
is repeated at a lower frame rate. This process continues
until the maximum throughput is determined.

throughputReportEntry row .1.3.6.1.4.1.164.6.1.15.3.2.1

An entry in table.

Indexes

tstNePerfRepTestId tstNePerfRepIteration throughputReportTrialNumber throughputReportPacketSize

Column	Syntax	OID
throughputReportTrialNumber The test trail number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.2.1.1
throughputReportPacketSize The packet size that was tested.	RadTestPerfresultFrameSize Type Values: 1 s64 2 s128 3 s256 4 s512 5 s1024 6 s1280 7 s1518 8 s1700 9 s1900 10 s2000 11 s2048 12 s4096 13 s9600 14 custom	.1.3.6.1.4.1.164.6.1.15.3.2.1.2
throughputReportThroughputTheoretical The max theoretical Throughput (FPS) on this media.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.2.1.3
throughputReportResults The actual measured Throughput (FPS).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.2.1.4
throughputReportDataPattern The pattern at the test frame payload.	Enumeration Enumerated Values: 1 notApplicable 2 allOnes 3 allZerosWithoutCrc 4 allZerosWithCrc 5 alternate 6 prbsWithCrc 7 prbsWithoutCrc	.1.3.6.1.4.1.164.6.1.15.3.2.1.5
throughputReportResultsBps The actual measured Throughput (BPS). Note, the conversion between PPS to BPS depends on the value of tstNePerfRepTestRateConvention.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.2.1.6
throughputReportCustomPacketSize A user configurable frame size to be used in the tests. Relevant only when the scustom (14) is set to RadTestPerfresultFrameSize.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.2.1.7

This table indicates the throughput Report.
An entry in this table will be created upon activating the test and only
if the tstNePerfRepTestType = latency (2)
          
The latency test runs the traffic at the throughput 
rate result for each tested frame size for two minutes 
and measure the latency of a single tagged frame sent 
after one minute into test. 
The latency report is the average of 20 tests.

latencyReportEntry row .1.3.6.1.4.1.164.6.1.15.3.3.1

An entry in table.

Indexes

tstNePerfRepTestId tstNePerfRepIteration latencyReportTrialNumber latencyReportPacketSize

Column	Syntax	OID
latencyReportTrialNumber The test trail number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.3.1.1
latencyReportPacketSize The packet size that was tested.	RadTestPerfresultFrameSize Type Values: 1 s64 2 s128 3 s256 4 s512 5 s1024 6 s1280 7 s1518 8 s1700 9 s1900 10 s2000 11 s2048 12 s4096 13 s9600 14 custom	.1.3.6.1.4.1.164.6.1.15.3.3.1.2
latencyReportType RFC1245 definition: store and forward devices: The time interval starting when the last bit of the input frame reaches the input port and ending when the first bit of the output frame is seen …	Enumeration Enumerated Values: 1 storeAndForward 2 bitForwarding	.1.3.6.1.4.1.164.6.1.15.3.3.1.3
latencyReportResult The Latency result in microseconds.	micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.3.1.4
latencyReportCustomPacketSize A user configurable frame size to be used in the tests. Relevant only when the scustom (14) is set to RadTestPerfresultFrameSize.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.3.1.5

This table indicates the Frame loss result.
An entry in this table will be created upon activating the test and only
if the tstNePerfRepTestType = frameloss (1).
          
          
The Frame loss test is based on the test begins at 100% frame 
rate by sending a specific number of frames and recording 
the percentage of the lost frames. The rate is reduced by 10% on 
each circle and the test is repeated until there are 2 successive 
trials in which no frame loss.

framelossRateReportEntry row .1.3.6.1.4.1.164.6.1.15.3.4.1

An entry in table.

Indexes

tstNePerfRepTestId tstNePerfRepIteration framelossRateReportTrialNumber framelossRateReportPacketSize framelossRateReportInputRate

Column	Syntax	OID
framelossRateReportTrialNumber The test trail number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.4.1.1
framelossRateReportPacketSize The packet size that was tested.	RadTestPerfresultFrameSize Type Values: 1 s64 2 s128 3 s256 4 s512 5 s1024 6 s1280 7 s1518 8 s1700 9 s1900 10 s2000 11 s2048 12 s4096 13 s9600 14 custom	.1.3.6.1.4.1.164.6.1.15.3.4.1.2
framelossRateReportInputRate The input frame rate (in percentage) of the theoretical rate at the specific frame size.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.4.1.3
framelossRateReportResults The number of error frames.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.4.1.4
framelossRateReportCustomPacketSize A user configurable frame size to be used in the tests. Relevant only when the scustom (14) is set to RadTestPerfresultFrameSize.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.4.1.5

This table includes the status of each iteration of test x.
An entry in this table will be created upon activating a test
and shall be removed upon deleting a test.

tstNePerfRepStatusEntry row .1.3.6.1.4.1.164.6.1.15.3.5.1

An entry in table.

Indexes

tstNePerfRepTestId tstNePerfRepIteration

Column	Syntax	OID
tstNePerfRepIteration The iteration index is used to distinguish between the tests iterations. i.e. if the user activates 'test 1' twice, the NE shall the store the results of both tests where 1 is the most recent test. This table holds the …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.5.1.1
tstNePerfRepStartTime The object indicate the Date And Time of the iteration.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.164.6.1.15.3.5.1.2
tstNePerfRepDuration The object indicate the duration of the test.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.5.1.3
tstNePerfRepStatus The status of the test.	Enumeration Enumerated Values: 1 idle 2 inProgress 3 success 4 fail 5 oamConnectivityFailure 6 other 7 timeOut 8 pending	.1.3.6.1.4.1.164.6.1.15.3.5.1.4
tstNePerfRepType The type of the current running test.	Enumeration Enumerated Values: 1 notApplicable 2 throughput 3 frameloss 4 latency	.1.3.6.1.4.1.164.6.1.15.3.5.1.5
tstNePerfRepIterationNum The number of iteration in the current running test Use only if tstNePerfRepIteration = 0.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.5.1.6
tstNePerfRepTrial The number of trial in iteration in the current running test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.5.1.7
tstNePerfRepAttemptNum The attempt number in the current running test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.5.1.8
tstNePerfRepFrameSize The Frame Size in the current running test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.5.1.9
tstNePerfRepLatencyNum The actual number of Latency iterations that were performed.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.5.1.10

This table holds the measurements and results for each Y.1564 test
that was performed.

ituSatReportEntry row .1.3.6.1.4.1.164.6.1.15.3.6.1

An entry in Y.1564 report table.

Rows are automatically created when the corresponding generator in the
ituSatGeneratorTable is successfully activated - for details, see
below the description of the index o…

Indexes

ituSatGeneratorIndex ituSatReportPbitIndex ituSatReportTestTypeIndex ituSatReportDirectionIndex

Column	Syntax	OID
ituSatReportPbitIndex The P-bit index of the report. Allows holding measurements and result per P-bit. One entry for each set P-bit in the ituSatGeneratorTestedPbits. If the ituSatGeneratorTestedPbits is zero i.e. untagged EVC…	RadTestPbitIndex Type Values: 0 pbit0 1 pbit1 2 pbit2 3 pbit3 4 pbit4 5 pbit5 6 pbit6 7 pbit7	.1.3.6.1.4.1.164.6.1.15.3.6.1.1
ituSatReportTestTypeIndex The sub-test type index of the report. Allows holding measurements and result per sub-test type. Entries are created according to the associated configuration in the profile e.g. number of CIR steps, traf…	Enumeration Enumerated Values: 1 cirStep1 2 cirStep2 3 cirStep3 4 cirStep4 5 eir 6 policing 7 performance	.1.3.6.1.4.1.164.6.1.15.3.6.1.2
ituSatReportDirectionIndex The direction index of the report. Allows holding measurements per direction. For unidirectional test only the forward(1) entry is created. For bidirectional test the roundtrip(3) entry must exist and sup…	Enumeration Enumerated Values: 1 forward 2 backward 3 roundTrip	.1.3.6.1.4.1.164.6.1.15.3.6.1.3
ituSatReportResult The result of the sub-test. The initial value is notApplicable(1). Upon completion of the sub-test the value changes to passed(2) or failed(3). If the test is stopped by the operator before the completion…	RAD-TCRadTestResult Type Values: 1 notApplicable 2 passed 3 failed 4 userAborted 5 systemAborted 6 llFailure	.1.3.6.1.4.1.164.6.1.15.3.6.1.4
ituSatReportTxRate The transmission rate that the generator was configured to in the sub-test.	KbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.5
ituSatReportIrMin The minimum measured information rate. The initial value is zero.	KbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.6
ituSatReportIrAverage The average calculated information rate. The initial value is zero.	KbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.7
ituSatReportIrMax The maximum measured information rate. The initial value is zero.	KbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.8
ituSatReportTxFrames The number of transmitted frames. The initial value is one.	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.6.1.15.3.6.1.9
ituSatReportLostFrames The number of frames lost. The FLR is calculated by: (ituSatReportLostFrames / ituSatReportTxFrames) The initial value is zero.	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.6.1.15.3.6.1.10
ituSatReportFtdMin The minimum measured frame transfer delay. The initial value is zero.	micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.11
ituSatReportFtdAverage The average calculated frame transfer delay. The initial value is zero.	micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.12
ituSatReportFtdMax The maximum measured frame transfer delay. The initial value is zero.	micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.13
ituSatReportFtdStd The calculated standard deviation of the frame transfer delay. The initial value is zero.	micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.14
ituSatReportFdvAverage The average calculated frame delay variation. The initial value is zero.	micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.15
ituSatReportFdvMax The maximum calculated frame delay variation. The initial value is zero.	micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.16
ituSatReportUas The number of unavailable seconds. This object is relevant only for the performance test. For the other test type entries the value is zero. The initial value is zero.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.17
ituSatReportAvailability The percentage of available time. The availability is calculated by: (ituSatGeneratorPerfDuration - ituSatReportUas) * 10000 / ituSatGeneratorPerfDuration This object is relevant only for t…	hundredth of percentUnsigned32 Constraints: range: 0-10000	.1.3.6.1.4.1.164.6.1.15.3.6.1.18
ituSatReportTotalTxRate The total transmission rate (i.e. green and yellow frames) that the generator was configured to in the sub-test. This object is relevant only for the color-aware EIR and color-aware traffic policing test …	kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.19
ituSatReportTotalIrAverage The average calculated total information rate (i.e. green and yellow frames). This object is relevant only for the color-aware EIR and color-aware traffic policing test types. For the other test type entr…	kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.1.15.3.6.1.20
ituSatReportTotalTxFrames The total number of transmitted frames (i.e. green and yellow frames). This object is relevant only for the color-aware EIR and color-aware traffic policing test types. For the other test type entries the…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.6.1.15.3.6.1.21
ituSatReportTotalLostFrames The total number of frames lost (i.e. green and yellow frames). The total FLR is calculated by: (ituSatReportTotalLostFrames / ituSatReportTotalTxFrames) This object is relevant only for th…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.6.1.15.3.6.1.22