prtSonetVcSignalLabel
RAD-Sonet-MIB ·
.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.7
Object
column
r/w
OctetString
Signal Label.
For VC-3:
The SONET standard defines the C2 byte as
the path signal label. The purpose of this byte is to
communicate the payload type being encapsulated by the
SONET Framing OverHead. It allows a single interface to
transport multiple payload types simultaneously.
For VC-12, VT-1.5:
VT path overhead V5 byte allocates bits 5-7 for
VT Path Signal Label, to indicate the content of the VT SPE.
000 Unequipped
001 Equipped : non-specific payload
010 Asynchronous mapping
011 Bit synchronous mapping (no longer valid for DS1)
100 Byte synchronous mapping
101 Unassigned
110 Unassigned
111 Unassigned
Agents that do not support this feature will send SIZE 0.
Context
- MIB
- RAD-Sonet-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtSonetVcEntry
- Table
- prtSonetVcTable
- Siblings
- 10
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtSonetVcCnfgIdx This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For products that support several configurations, Set can be perf… | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1 |
| prtSonetVcPayloadType Payload type, applicable for STS-1/TUG-3 layer.
vc1x = vc12 or vc11 for SDH, VT1.5, VT2 for SONET.
clear channel - complete TUG-3 or STS-1
For Egate-100:
POS (Packets over So… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.10 |
| prtSonetVcPathTraceSize Path Trace Size in Bytes - 16 or 64. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.11 |
| prtSonetVcIdx This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2 |
| prtSonetVcJTxPathTraceEnable Enable/Disable transmitting Jy Path Trace. y = 0, 1, 2:
J0 - for SDH/SONET layer
J1 - for VC-4 layer
J2 - for VC-12 layer.
The default value is 'enable' (3). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3 |
| prtSonetVcJRxPathTraceEnable Enable/Disable checking Jy Path Trace. y = 0, 1, 2:
J0 - for SDH/SONET layer
J1 - for VC-4 layer
J2 - for VC-12 layer. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4 |
| prtSonetVcJPathTrace Jy Path Trace. y = 0, 1, 2:
J0 - for SDH/SONET layer
J1 - for VC-4 layer
J2 - for VC-12 layer.
This object is applicable only if one of the previous 2
objects is 'enable'.
The J0… | column | OctetString | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5 |
| prtSonetVcConnect Connect VCn (n - 11,12,2,3,4) port (yes/no). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6 |
| prtSonetVcPathTracePadding Padding character will pad prtSonetVcJPathTrace string
to fill required number of characters.
The default value is nulls (2) '0x00'. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.8 |
| prtSonetVcPayloadBlockOnPathTrace Block payload on this VC upon PathTrace (TIM). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.9 |