prtSonetVcPayloadBlockOnPathTrace
RAD-Sonet-MIB ·
.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.9
Object
column
r/w
Enumeration
Block payload on this VC upon PathTrace (TIM).
Context
- MIB
- RAD-Sonet-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtSonetVcEntry
- Table
- prtSonetVcTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtSonetVcCnfgIdx This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For products that support several configurations, Set can be perf… | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1 |
| prtSonetVcPayloadType Payload type, applicable for STS-1/TUG-3 layer.
vc1x = vc12 or vc11 for SDH, VT1.5, VT2 for SONET.
clear channel - complete TUG-3 or STS-1
For Egate-100:
POS (Packets over So… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.10 |
| prtSonetVcPathTraceSize Path Trace Size in Bytes - 16 or 64. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.11 |
| prtSonetVcIdx This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2 |
| prtSonetVcJTxPathTraceEnable Enable/Disable transmitting Jy Path Trace. y = 0, 1, 2:
J0 - for SDH/SONET layer
J1 - for VC-4 layer
J2 - for VC-12 layer.
The default value is 'enable' (3). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3 |
| prtSonetVcJRxPathTraceEnable Enable/Disable checking Jy Path Trace. y = 0, 1, 2:
J0 - for SDH/SONET layer
J1 - for VC-4 layer
J2 - for VC-12 layer. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4 |
| prtSonetVcJPathTrace Jy Path Trace. y = 0, 1, 2:
J0 - for SDH/SONET layer
J1 - for VC-4 layer
J2 - for VC-12 layer.
This object is applicable only if one of the previous 2
objects is 'enable'.
The J0… | column | OctetString | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5 |
| prtSonetVcConnect Connect VCn (n - 11,12,2,3,4) port (yes/no). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6 |
| prtSonetVcSignalLabel Signal Label.
For VC-3:
The SONET standard defines the C2 byte as
the path signal label. The purpose of this byte is to
communicate the payload type being encapsulated by the
SONE… | column | OctetString | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.7 |
| prtSonetVcPathTracePadding Padding character will pad prtSonetVcJPathTrace string
to fill required number of characters.
The default value is nulls (2) '0x00'. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.8 |