prtSonetVcJPathTrace
RAD-Sonet-MIB ·
.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5
Object
column
r/w
OctetString
Jy Path Trace. y = 0, 1, 2: J0 - for SDH/SONET layer J1 - for VC-4 layer J2 - for VC-12 layer. This object is applicable only if one of the previous 2 objects is 'enable'. The J0 SDH default value is 0x00. The J0 SONET default value is 0x01. For J1 and J2 default value is 0x00. This object may be used to configure TX trace messages. The prtSonetVcStatTable.prtSonetVcRxJPathTrace OBJECT contains RX Trace message values.
Context
- MIB
- RAD-Sonet-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtSonetVcEntry
- Table
- prtSonetVcTable
- Siblings
- 10
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtSonetVcCnfgIdx This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For products that support several configurations, Set can be perf… | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1 |
| prtSonetVcPayloadType Payload type, applicable for STS-1/TUG-3 layer.
vc1x = vc12 or vc11 for SDH, VT1.5, VT2 for SONET.
clear channel - complete TUG-3 or STS-1
For Egate-100:
POS (Packets over So… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.10 |
| prtSonetVcPathTraceSize Path Trace Size in Bytes - 16 or 64. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.11 |
| prtSonetVcIdx This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2 |
| prtSonetVcJTxPathTraceEnable Enable/Disable transmitting Jy Path Trace. y = 0, 1, 2:
J0 - for SDH/SONET layer
J1 - for VC-4 layer
J2 - for VC-12 layer.
The default value is 'enable' (3). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3 |
| prtSonetVcJRxPathTraceEnable Enable/Disable checking Jy Path Trace. y = 0, 1, 2:
J0 - for SDH/SONET layer
J1 - for VC-4 layer
J2 - for VC-12 layer. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4 |
| prtSonetVcConnect Connect VCn (n - 11,12,2,3,4) port (yes/no). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6 |
| prtSonetVcSignalLabel Signal Label.
For VC-3:
The SONET standard defines the C2 byte as
the path signal label. The purpose of this byte is to
communicate the payload type being encapsulated by the
SONE… | column | OctetString | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.7 |
| prtSonetVcPathTracePadding Padding character will pad prtSonetVcJPathTrace string
to fill required number of characters.
The default value is nulls (2) '0x00'. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.8 |
| prtSonetVcPayloadBlockOnPathTrace Block payload on this VC upon PathTrace (TIM). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.9 |