prtSonetStm1RoutingProt
RAD-Sonet-MIB ·
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5
Object
column
r/w
Enumeration
Routing Protocol.
Context
- MIB
- RAD-Sonet-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtSonetStm1Entry
- Table
- prtSonetStm1Table
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtSonetStm1CnfgIdx This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For products that support several configurations, Set can be perf… | column | Integer32 | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1 |
| prtSonetStm1S1ProtocolClock This parameter allows user to select whether to enable use of
Remote Side Clock according to the Protocol passed on S1 Bit. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.10 |
| prtSonetStm1GatewayRingSubnetAddress This parameter defines subnet for static routing,
together with prtSonetStm1GatewayRingSubnetMask | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.11 |
| prtSonetStm1GatewayRingSubnetMask This parameter defines subnet for static routing,
together with prtSonetStm1GatewayRingSubnetAddress | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.12 |
| prtSonetStm1MngProtDeviationType This parameter is used in conjunction with prtSonetStm1MngProt
to define management protocol used & type of deviation
(if exist) from standard.
Standard = no deviation from stan… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.13 |
| prtSonetStm1MngSameIpAsHost This parameter indicates whether IP address
used for management is same as the device IP address | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.14 |
| prtSonetStm1MngIpAddress This parameter defines IP address for DCC management
for this link, together with prtSonetStm1MngIpSubnetMask.
This parameter is applicable only if prtSonetStm1MngSameIpAsHost=… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.15 |
| prtSonetStm1MngIpSubnetMask This parameter defines IP subnet mask for DCC management
for this link, together with prtSonetStm1MngIpAddress
This parameter is applicable only if prtSonetStm1MngSameIp=no | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.16 |
| prtSonetStm1MngDefaultGateway This parameter defines default Gateway address for DCC management
for this link.
This parameter is applicable only if prtSonetStm1MngSameIp=no | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.17 |
| prtSonetStm1Idx This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2 |
| prtSonetStm1ClockSrc Clock Source of the STM-1 port.
lbt = Loop Back Timing. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3 |
| prtSonetStm1DccMode DCC Mode. DCC=Data Communication Channel.
d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section).
d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section).
d1.... d12 enable use… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4 |
| prtSonetStm1MngProt Management Protocol over DCC: Proprietary, PPP, Frame Relay,
HDLC or LAPD over HDLC .
ppp = according to STD-51 ( rfc1661/1662) | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6 |
| prtSonetStm1OperationalMode Operational Mode.
linear - cannot be selected when there is Redundancy between the
STM-1 ports. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.7 |
| prtSonetStm1VoiceChannel This parameter enable user to select whether
voice channel will be transferred using E1 byte, E2 Byte, or not at all. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.8 |
| prtSonetStm1OutputRate This parameter indicates the output rate in cells/sec, which is
supported per port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.9 |