prtSonetGenCnfgIdx
RAD-Sonet-MIB ·
.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1
Object
column
Integer32
This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255).
Context
- MIB
- RAD-Sonet-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtSonetGenEntry
- Table
- prtSonetGenTable
- Siblings
- 4
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtSonetGenIdx This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2 |
| prtSonetGenSdThreshold SD=Signal Degraded Threshold. Units: [10E-].
The threshold is 10E-x relative to the frequency of the data flow.
x=3, 4, 5, 6, 7, 8, 9.
n3= 10E-3
n4= 10E-4
n5= 10E-5
n6= 10E-6
n7= … | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3 |
| prtSonetGenEedThreshold EED=Excessive Error Defect Threshold. Units: [10E-].
The threshold is 10E-x relative to the frequency of the data flow.
x=3, 4, 5, 6, 7, 8, 9.
n3= 10E-3
n4= 10E-4
n5= 10E-5
n6= 10… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4 |
| prtSonetGenBerEnable Controls the activation of the Line Ber (Bit Error Rate),
means whether SD and EED threshold parameters will be
enabled. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.5 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| RAD-GEN-MIBalarmEventLogSourceName This object identifies the alarm or event source name defined as an ASCII string.
For detailed description see object activeAlarmSourceName. | column | OctetString | .1.3.6.1.4.1.164.6.5.2.1.1.10 |
| RAD-GEN-MIBalarmEventLogAlarmOrEventId This object identifies the ID of the alarm or the event. | column | AlarmEventId | .1.3.6.1.4.1.164.6.5.2.1.1.3 |
| RAD-GEN-MIBalarmEventLogDescription The description of the alarm or event. | column | OctetString | .1.3.6.1.4.1.164.6.5.2.1.1.4 |
| RAD-GEN-MIBalarmEventLogSeverity For raised alarms this object denotes the specific alarm severity;
For cleared alarms its value is always clear(1).
For events the value of this object is always warning(6). | column | AlarmSeverity | .1.3.6.1.4.1.164.6.5.2.1.1.7 |
| RAD-GEN-MIBalarmEventLogDateAndTime This variable denotes the time in which the alarm or the event occurred.
If the NE implements a real-time clock, this variable MUST hold the UTC time.
If the NE does not support a… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.6.5.2.1.1.2 |
| RAD-GEN-MIBalarmEventReason This object is relevant for alarms only.
It shows the reason for clearing the alarm. | column | AlarmReason | .1.3.6.1.4.1.164.6.5.2.1.1.9 |
| IF-MIBifAlias This object is an 'alias' name for the interface as
specified by a network manager, and provides a non-volatile
'handle' for the interface.
On the first instantiati… | column | OctetString | .1.3.6.1.2.1.31.1.1.1.18 |
| prtSonetCurrentXStatus This variable indicates the Status of the interface.
It contains failure state information.
The variable is a bit map represented as a sum, therefore,
it can represent multiple fa… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.2.1.2.1.13 |